VARO PowerPlus POWE10060 Manual 

P a g e | 1 www.varo.com 1 APPLICATION .................................................................................. 2 2 DESCRIPTION(FIG.1) ...................................................................... 2 3 PACKAGE CONTENT LIST ............................................................. 2 4 SYMBOLS ..... ...

P a g e | 2 www.varo.com HAMMER DRILL 900W POWE10060 1 APPLICATION The machine is intended for hammer drilling in concrete, brick and stone, as well as for light chiseling work. It is also suitable for drilling without impact in wood, metal, ceramic and plastic. Not suitable for professional use. Warning! Read this man ...

P a g e | 3 www.varo.com 4 SYMBOLS In this manual and/or on the machine the following symbols are used: Read manual before use In accordance with essential requirements of the European directive(s) Class II - The machine is double insulated; Earthing wire is therefore not necessary. Wear ear guards and goggles Denotes ...

P a g e | 4 www.varo.com medication. A moment of inattention while operating power tools may result in serious personal injury.  Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used whenever conditions require will reduce pe ...

P a g e | 5 www.varo.com  Make sure of your footing on ladders and scaffolding when drilling free-handed.  Use a line detector to localize lines in walls with concealed electric, water or gas lines. Avoid touching live components or conductors.  Wear ear muffs to protect your hearing. Loss of hearing can be a ...

P a g e | 6 www.varo.com 8 OPERATION 8.1 Switching ON/OFF  Connect the plug to the power supply. The power-on indicator (11) is illumed until the tool disconnect from the power mains.  Switching on: Press the operating switch (8).  Switching off: Release the operating switch(8) 8.2 Handle attachment (Fig. 3) ...

P a g e | 7 www.varo.com Important! When hammer drilling you will require a low pressure. Too much pressure will place unnecessary load on the motor. Check the drill bits regularly. Re-sharpen or replace blunt drill bits. Do not use the chuck with SDS connector in combination with the hammer/hammer drill function! 9 CL ...

P a g e | 8 www.varo.com 12 SERVICE DEPARTMENT  Damaged switches must be replaced by our after-sales service department.  If the connecting cable (or mains plug) is damaged, it must be replaced by a particular connecting cable which is available from our service department. Replacement of the connecting cable mus ...

P a g e | 9 www.varo.com 15 ENVIRONMENT Should your appliance need replacement after extended use, do not discard it with the household rubbish but dispose of it in an environmentally safe way. Waste produced by electrical machine items should not be handled like normal household rubbish. Please recycle where recycle f ...