Philips BTS7000/10 Operation & User’s Manual

Register your product and get support at Question? Contact Philips ...

UK mains plug. This product is fitted with an approved molded plug. If you replace the fuse, use one with: • the ratings shown on the plug, • a BS 1362 approval, and • the ASTA approval mark. Contact your dealer if you are not sure about what type of fuse to use. Caution: To conform with the E ...

3 Care of the environment 3 Compliance 3 Help and support 3 2 Your product 4 Main unit 4 Remote control 5 Connectors 6 3 Connect and set up 7 Connect the main unit 7 Place speakers 7 Connect to TV 8 Connect audio from TV and other devices 8 4 Use your product 9 Adjust the volume 9 Choose your ...

use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or ...

insulation, and no protective earth provided. Care for your product • Use only microfiber cloth to clean the product, such as removing dust and shedding accumulated on the speaker cloth. Do not use any cleaning solvent to clean the wooden panels and speaker cloth. • The wooden panels may vary on color a ...

Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Main unit This product is comprised of left and right speakers. a Red/white/blue LEDs Red LED • Lights up when this product is switched to standby. White LED • Lights up whe ...

remote control. a (Standby-On) • Switch this product on or to standby. • When EasyLink is enabled, press and hold for at least three seconds to switch all connected HDMI CEC compliant devices to standby. b Source buttons HDMI ARC: Switch your source to HDMI ARC connection Bluetooth: S ...

2 Insert one CR2025 battery, with the polarity (+/-) as indicated. 3 Close the battery compartment. 3 1 2 Connectors This section includes an overview of the connectors available on this product. On the left speaker a AUDIO IN Audio input from, for example, an MP3 player (3.5mm jack). b USB connector (not for media play) ...

a TO L SPEAKER Connect to the left speaker. b AC MAINS~ Connect to the power supply. a b 3 Connect and set up This section helps you connect this product to a TV and other devices, and then set it up. For information about the basic connections of this product and accessories, see the quick start guide. Note • For identif ...

Connect this product to a TV. You can listen to audio from TV programs through the speakers of this product. Use the best quality connection available on this product and TV. Connect to TV through HDMI (ARC) Best quality audio This product supports HDMI with Audio Return Channel (ARC). If your TV is HDMI ARC compliant, you can hear the TV a ...