Sealey H-3000 Instructions
Text of Sealey H-3000 Instructions
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT
BEFORE USING THIS PRODUCT, PLEASE READ THE INSTRUCTIONS CAREFULLY. MAKE CAREFUL NOTE OF SAFETY
INSTRUCTI
The H-3000 is a portable spot welder with an electronic timer which enables precision spot welding on low carbon sheet steel ( using the standard
arms supplied ) up to a thickness of 1+1mm. The unit also features welding pressure adjustment. The H-3000 is similar to the H-3000
2 but has additional
features and capabilities enabling welding on low carbon she
5. SETTING UP TO WELD
WARNING! Ensure that you read and understand the safety
instructions in Section 1.
Before carrying out any spot welding operations, the following series of
checks and controls must be carried out with the welder disconnected
from the power supply.
5.1
Setting up and adjusting the arms.( Refer to fig.2) Obtain
samples of the sheet met
WARNING: Unplug from the mains power supply before performing maintenance or service.
7.1
Ensure the welder and cable are in sound condition and good working order.
7.2
We recommend that you have your welder serviced on a regular basis by an authorised service agent.
During any inspection of the inside of the machine for repairs or cleaning the following che