ToolKitRC M9 Manual 

please read this manual carefully before use. Key Points Tips Important Information Further information To ensure you have the best experience with this product, please scan the QR code below to stay up to date with news, information and firmware updates for your charger; this inf ...

of DC 7.0-35.0V. Ensure the charger is only connected to a suitable power source and correct polarity. 2. Do not use this product in hot, humid, flammable or explosive environments. 3. Please do not use this charger without supervision. Never leave charging batteries unattended. 4. When not using this produc ...

Further information.............................................2 Safety.....................................................................3 Contents..................................... ...

10. External load setting....................................21 11. Smart battery setting...................................21 Charge and discharge work............................ 23 Accessibility.........................................................27 3. Signal output ...

functions such as a balance charger and discharger, a signal measuring device, and a signal source.  Charges, discharges and balances (where applicable) LiPo, LiHV, LiFe, Lion, LTO 1-8S, NiMh 1-20S, PB 1-10S batteries.  Charge current：MAX 20A @MAX600W.  Discharge ...

Exit Cooling fan Signal port TF Card Speaker ...

the back of the M9. 2，The display shows the boot logo and stays for 2 seconds. 3，A welcome sound (voice pack dependent) is played simultaneously. 4，After booting up, the screen enters the main interface as shown below: 5，Press and hold [Exit] to enter the auxiliary f ...

In the main interface, select and short press [OK] to enter the charging function, open the battery selection option in system settings, and the following interface will be displayed. 1. Battery type setting Scroll [Scroll Wheel], and select one of the presets, or create a new battery. Up to 32 battery files can ...

modify the battery type, the display is as follows: The charger supports charging and discharging of 6 types of batteries: Lipo, LiHV, LiFe, Lion, LTO, NiMh, and PB. There is also a smart battery mode to choose from. ...