Rohde & Schwarz SMM100A Getting Started

options. © 2021 Rohde & Schwarz GmbH & Co. KG Mühldorfstr. 15, 81671 München, Germany Phone: +49 89 41 29 - 0 Email: [email protected] Internet: www.rohde-schwarz.com Subject to change – data without tolerance limits is not binding. R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG. Trade names are trademarks of the owners. 1179.1335.02 | Version 04 | R&S®SMM ...

Contents 1 Safety and regulatory information....................................... 7 1.1 Safety Instructions................................................................................7 1.2 Labels on R&S SMM100A...................................................................10 1.3 Warning messages in the documentation........................................10 2 Key features................ ...

4.1.2 Keys......................................................................................................31 4.1.2.1 Utility keys.............................................................................................31 4.1.2.2 On/Standby...........................................................................................32 4.1.2.3 Function keys.................................... ...

6.7 I/Q modulator ("I/Q mod" block)........................................................ 72 6.8 Analog I/Q output ("I/Q analog" block)............................................. 73 6.9 RF and analog modulations ("RF" block).........................................73 6.10 Applications examples of the R&S SMM100A..................................73 7 Instrument control.......................... ...

R&S®SMM100A 7 Getting Started 1179.1335.02 ─ 04 1 Safety and regulatory information The product documentation helps you use the product safely and efficiently. Fol- low the instructions provided here and in the following chapters. Intended use The product is intended for the development, production and verification of elec- tronic components and devices in industrial, administrative, and laboratory envi- ronments. Use ...

R&S®SMM100A 8 Getting Started 1179.1335.02 ─ 04 Never open the casing of the product. Only service personnel authorized by Rohde & Schwarz are allowed to repair the product. If any part of the product is damaged or broken, stop using the product. Contact Rohde & Schwarz customer service at http://www.customersupport.rohde-schwarz.com. Lifting and carrying the product The product is heavy. Do not move or carry the produc ...

R&S®SMM100A 9 Getting Started 1179.1335.02 ─ 04 If you mount products in a rack, ensure that the rack has sufficient load capacity and stability. Observe the specifications of the rack manufacturer. Always install the products from the bottom shelf to the top shelf so that the rack stands securely. Secure the product so that it cannot fall off the rack. Connecting to power The product is an overvoltage category II produ ...

R&S®SMM100A 10 Getting Started 1179.1335.02 ─ 04 Meaning of safety labels Safety labels on the product warn against potential hazards. Potential hazard Read the product documentation to avoid personal injury or product damage. Heavy product Be careful when lifting, moving or carrying the product. Carrying the product requires a sufficient number of persons or transport equipment. Electrical hazard Indicates live parts. ...

R&S®SMM100A 11 Getting Started 1179.1335.02 ─ 04 WARNING Potentially hazardous situation. Could result in death or serious injury if not avoi- ded. CAUTION Potentially hazardous situation. Could result in minor or moderate injury if not avoided. NOTICE Potential risks of damage. Could result in damage to the supported product or to other property. Warning messages in the documentation ...

R&S®SMM100A 12 Getting Started 1179.1335.02 ─ 04 Warning messages in the documentation ...

2 Key features The R&S SMM100A is a new high-performance signal generator developed to meet demanding customer requirements. Offering excellent signal characteristic and straightforward and intuitive operation, the signal generator makes signal generation fast and easy. Outstanding key features of the R&S SMM100A are: ● Frequency range from 100 kHz to 44 GHz ● Up to 1 GHz I/Q modulation ...

R&S®SMM100A 15 Getting Started 1179.1335.02 ─ 04 3 Preparing for use Here, you can find basic information about setting up the product for the first time. 3.1 Lifting and carrying ► WARNING! The R&S SMM100A can be heavy, e.g., if fully equipped. Use a lifting equipment, see also "Lifting and carrying the product" on page 8. Use the carrying handles at the side for lifting and carrying the R&S SMM100A. The handles at the front are o ...

R&S®SMM100A 16 Getting Started 1179.1335.02 ─ 04 3.3 Choosing the operating site Specific operating conditions ensure proper operation and avoid damage to the product and connected devices. For information on environmental conditions such as ambient temperature and humidity, see the data sheet. See also "Choosing the operating site" on page 8. Electromagnetic compatibility classes The electromagnetic compatibility (EMC) class indicate ...

R&S®SMM100A 17 Getting Started 1179.1335.02 ─ 04 2. CAUTION! Foldable feet can collapse. See "Setting up the product" on page 8. Always fold the feet completely in or out. With folded-out feet, do not place anything on top or underneath the product. 3. WARNING! A stack of products can fall over and cause injury. Never stack more than three products on top of each other. Instead, mount them in a rack. Stack as follows: ● If the produc ...

R&S®SMM100A 18 Getting Started 1179.1335.02 ─ 04 3.4.2 Mounting the R&S SMM100A in a rack To prepare the rack 1. Observe the requirements and instructions in "Setting up the product" on page 8. 2. NOTICE! Insufficient airflow can cause overheating and damage the product. Design and implement an efficient ventilation concept for the rack. To mount the R&S SMM100A in a rack 1. Use an adapter kit that fits the dimensions of the R&S SMM10 ...

R&S®SMM100A 19 Getting Started 1179.1335.02 ─ 04 3.5 Considerations for test setup Cable selection and electromagnetic interference (EMI) Electromagnetic interference (EMI) can affect the measurement results. To suppress electromagnetic radiation during operation: ● Use high-quality shielded cables, especially for the following connector types: – BNC Double-shielded BNC cables. How to: "To connect to non-screwable connectors (BNC) ...

R&S®SMM100A 20 Getting Started 1179.1335.02 ─ 04 Preventing electrostatic discharge (ESD) Electrostatic discharge is most likely to occur when you connect or disconnect a DUT. ► NOTICE! Risk of electrostatic discharge. Electrostatic discharge can damage the electronic components of the product and the device under test (DUT). Ground yourself to prevent electrostatic discharge damage: a) Use a wrist strap and cord to connect yourself ...