Texas Instruments TUSB1002EVM Operation & User’s Manual

Copyright © 2016, Texas Instruments Incorporated TUSB1002 Evaluation Module User's Guide SLLU245–May 2016 TUSB1002 Evaluation Module This is the user guide for the evaluation module (EVM) of the TUSB1002. The purpose of this user guide is to facilitate an easy evaluation process of our TUSB1002 USB 3.1 Su ...

USB 3.1 Device/Sink (External Hard Drive, Thumb Drive, and so forth) USB 3.1 Type-B Receptacle (Input) USB 3.1 Type-A Receptacle (Output) TUSB1002 EVM USB 3.1 Host/Source (Desktop, Laptop, Docking Station, and so forth) USB 3.1 Type-A Receptacle Copyright © 2016, Texas Instrumen ...

3 SLLU245–May 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated TUSB1002 Evaluation Module 2 TUSB1002 EVM Configuration 2.1 TUSB1002 EVM Kit Contents This EVM kit contains the following items: • TUSB1002 EVM board • This user’s manual 2.2 Description of EVM Board The TUSB1002 EV ...

www.ti.com 4 SLLU245–May 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated TUSB1002 Evaluation Module Table 1. TUSB1002 EVM Jumper / Switch Description and Settings Jumper Functionality and Configuration J1 CH1_EQ1 1-2 = 1 (1K to VCC) 3-4 = R (20K to GND) 5-6 = 0 (1K to GND) NC = F (No Connect) ...

5 SLLU245–May 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated TUSB1002 Evaluation Module 3 Selecting Equalization Level for TUSB1002 The equalization level of each channel is configured via the CHx_CFG1 and CHx_CFG2 pin states. Table 2 lists all possible equalization ...

www.ti.com 6 SLLU245–May 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated TUSB1002 Evaluation Module 5 Monitoring the Device Current The TUSB1002 EVM includes the option of monitoring the current draw of the device. In order to enable this feature, the following steps must be taken: 1. Un-in ...

Silkscreen: 3.3V VREG Silkscreen: J11-1 3.3V VREG J11-2 VCC_3.3V RX2P RX2N RX1N RX1P TX1P TX1P_Conn TX1N TX1N_Conn TX2P TX2P_Conn TX2N_Conn TX2N USB2_DM USB2_DP VBUS CH2_EQ2 CH2_EQ1 SLP_S0# CFG2 EN CFG1 CH1_EQ2 CH1_EQ1 MODE RSVD1 3.3V USB2_DM USB2_DP USB2_DM USB2_DP VBUS VBUS MODE EN CFG1 CH2_EQ2 CH2_EQ1 CFG2 SLP_S0# CH1_EQ1 CH1_EQ2 RSVD1 VCC_3.3V VCC_3.3V V ...

3-4 = R 5-6 = 0 NC = F Silkscreen: CH1_EQ2 Selection 1-2 = 1 3-4 = R 5-6 = 0 NC = F Silkscreen: CH2_EQ1 Selection 1-2 = 1 3-4 = R 5-6 = 0 NC = F Silkscreen: CH2_EQ2 Selection 1-2 = 1 3-4 = R 5-6 = 0 NC = F Silkscreen: RSVD1 Selection 1-2 = 1 3-4 = R 5-6 = 0 NC = F Silkscreen: CFG2 Selection 1-2 = 1 3-4 = R 5-6 = 0 NC = F ...

Copyright © 2016, Texas Instruments Incorporated TUSB1002 Evaluation Module 6.2 TUSB1002 EVM Board Layout This EVM was designed to show the implementation on a 4-layer board. Figure 5. TUSB1002 EVM Layout Layer 1 (Top) Figure 6. TUSB1002 EVM Layout Layer 2 (GND) ...

Copyright © 2016, Texas Instruments Incorporated TUSB1002 Evaluation Module Figure 7. TUSB1002 EVM Layout Layer 3 (VCC) Figure 8. TUSB1002 EVM Layout Layer 4 (Bottom) ...