Murata GQM2195C2E7R0BB12 Series Reference Sheet

Text of the manual

GQM2195C2E7R0BB12_ (0805, C0G, 7pF, 250Vdc)

_: packaging code Reference Sheet 1.Scope 2.MURATA Part NO. System (Ex.) 3. Type & Dimensions (Unit:mm) 4.Rated value 5.Package Product specifications in this catalog are as of Jan.30,2013,and are subject to change or obsolescence without notice. Please consult the approval sheet before ordering. Please read rating

2C,5C : -55℃ to 125℃

Temperature Range 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage which may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage rang

14 Resistance to

The measured and observed characteristics shall satisfy Preheat the capacitor at 120 to 150℃ for 1 minute. Soldering Heat the specifications in the following table. Immerse the capacitor in an eutectic solder solution or Appearance No defects or abnormalities. Sn-3.0Ag-0.5Cu solder solution at 270+/-5℃ for 10+/-0.5

Test method : Deflection

・Test substrate ・Test substrate Material : Copper-clad laminated sheets for PCBs Material : Copper-clad laminated sheets for PCBs           (Glass fabric base, epoxy resin) (Glass fabric base, epoxy resin) Thickness : 1.6mm Thickness : 1.6

1.Tape Carrier Packaging(Packaging Code:D/E/L/J/F/K)

1.1 Minimum Quantity(pcs./reel) φ180mm reel φ330mm reel Paper Tape Plastic Tape Paper Tape Plastic Tape Code:D/E Code:L Code:J/ F Code:K GQM18 4000 10000 GQM2 4000 10000 GQM2 1000 4000 1.2 Dimensions of Tape  (1)GQM18/21 (in mm) Code GQM18 GQM21 A 1.05±0.1 1.55±0.15 B 1.85±0.1 2.3±0.15  (2)GQM2

( 単位: mm)

φ21±0.8 10±1.5 16.5 max. Top Tape : Thickness 0.06 Feeding Hole :As specified in 1.2. Hole for Chip : As specified in 1.2. Base Tape : As specified in 1.2. Bottom Tape :Thickness 0.05 (Only a bottom tape existence ) φ180+0/-3.0 φ330±2.0 φ50 min. φ13±0.5 2.0±0.5 Chip (in mm) Fig.1 Package Chips Fig.2 Dimen

1.3 Tapes for capacitors are wound clockwise shown in Fig.3.

(The sprocket holes are to the right as the tape is pulled toward the user.) 1.4 Part of the leader and part of the vacant section are attached as follows. (in mm) 1.5 Accumulate pitch : 10 of sprocket holes pitch = 40±0.3mm 1.6 Chip in the tape is enclosed by top tape and bottom

■ Limitation of use

Please contact our sales representatives or product engineers before using our products for the applications listed below which require of our products for other applications than specified in this product.   ①Aircraft equipment ②Aerospace equipment ③Undersea equipment ④Power plant control equipmen

1.Temperature Dependent Characteristics

1. The electrical characteristics of the capacitor can change with temperature. 1-1. For capacitors having larger temperature dependency, the capacitance may change with temperature changes. The following actions are recommended in order to insure suitable capacitance values. (1) Select a suitable

Other Industrial Electrical Manuals