RIOTEC iDC9607A Manual 

Quick Guide Model no.: iDC9607A Introduction Designed primarily for POS retail/inventory environments, the iDC9607A is a Bluetooth pocket barcode scanner that allows you to scan various barcoded items. Its in-built excellent CCD engine allows you to reliably read 1D barcodes on various shapes and is a great space-saver for busy or limited workspaces. It supports iOS, Android, and Windows devices through BT HID or BT SPP communication. Delivery content * Pocket Barcode scanner x 1 * Mini USB cable x 1 (for charging only) * Quick instructions x 1 * Strap x 1 Limited Warranty Riotec provide one-year limited warranty. Riotec will not warranty any product which has been subjected to improper usage, neglect or unauthorized repair or installation. Besides, warranty does not cover the faulty usages or consumable parts. (Cable & battery are consumable.) Safety instructions Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling in this manual, we assume no liability for any resulting personal injury or damage to property. * Don’t put scanner in places excessively high temperatures, such as expose under direct sunlight * Don’t use scanner in extremely humid area or drastic temperature change * The rechargeable battery is permanently built into the product and cannot be replaced. * Never damage the rechargeable battery. Damaging the casing of the rechargeable battery might cause an explosion or a fire! Operating elements ** Please switch ON and charge scanner for 3~4 hours at first time before use. ** In the beginning, you must press the orange trigger button for 8 seconds to turn on the pocket barcode scanner. Then, press it for scanning barcodes & waking up from sleeping mode. Power Saving button: Press the button for 2~3 seconds then enter power saving mode SCAN/ENTER/Power ON Button (For iOS Device ONLY) the button to raise and lower ON-Screen Keyboard Indicator (LED) Exit Window Mini USB port with protective cover charge scanner via mini USB host cable.

1. Make sure your device supports BT HID or BT SPP profile 2. Turn off Power-Saving mode on your smartphone/tablet first 3. Then, choose HID or SPP device before connecting to smartphone/tablet. If you don’t know what profile your device is, please try HID profile first, then, SPP profile. 1. Main MENU 2. select Setup MAIN> S 12:52 Direct-scan Memory-scan Upload ↑ ENTER ↓ MAIN> S 12:52 Memory-scan Upload Setup ↑ ENTER ↓ 3. select BT setup S> S 12:52 BT setup Sleep time Output Speed ESC ENTER ↓ After you select what you want, press the orange button to enter the next or ESC button back to the previous. How to connect to SPP or HID device SPP device (from A1 to A2); HID device (from B1 to B3) A1. select SPP device B1. select HID device S/B> S 12:52 SPP device HID device dongle ESC ENTER ↓ S/B> S 12:52 SPP device HID device dongle ESC ENTER ↓ A2. Setting.. Completed. B2. select Simple pairing or Pairing Setting … Completed!!! S/B/H> H 12:52 Simple pairing Pairing ESC ENTER ↓ B3. Setting … Completed. Setting … Completed!!! After you select what you want, press the orange button to enter the next or ESC button back to the previous. 1. click the “Settings” 2. click “General” 3. click “Bluetooth” 4. Turn it ON, and search the Devices 5. Select “Rxxxxxx” to connect 6. When see the “Connected” means the connection is OK. (example: pairing with iPhone) 4. Please complete the connection procedures as the above photos. 5. After the connection is completed, the RED light will be OFF. 6. Before using WordPad file or appropriate APP, please set keyboard language of device to US language. Then, scan the barcodes and the barcode data will show on the cursor side. Notes: * This product complies with Bluetooth standards. This device that communicated with this product must support the same SPP or HID. For other Bluetooth devices with other profiles we cannot guarantee a connection before the product has been tested. * The communication speed and range of the product may vary due to obstacles and radio wave condition between the product and device to which it is connected. Condition on the host device may also affect the communication speed and range of the scanner. LED Indicator Information Orange LED ON Full charged Orange LED Flashing Charging / Low battery Red LED ON Offline / out of service Green LED ON Good read Orange LED ON Good read (Batch mode) Remark: * When the battery power is too low, the Orange LED will flash and beep once. Scanner should be charged immediately. * In case the power consumed out totally; the RTC (Real Time Clock) will back to original setting 01012000. * If scanner shuts down it is recommended to charge it fully before turning it back on. * Under power-saving mode, there will not be LED indication when charging. Reset Configuration to Defaults (scan from A1 to A8 for HID profile or B1 to B8 for SPP profile) HID profile SPP profile A1 Demo W010F01 B1 Demo W010F01 A2 Demo WFFD980 B2 Demo WFFD980 A3 Demo W100900 B3 Demo W100900 A4 Demo WFFD9C3 B4 www.tec-it.com WFFD9C4 A5 Demo WFF115D B5 Demo WFF115D A6 Demo W047400 B6 Demo W047400 A7 Demo W010F00 B7 Demo W010F00 A8 Demo %D%F%T B8 Demo %D%F%T

1. Direct-scan Mode 1. select Direct-scan 2a. BT connected, begin to scan the barcodes MAIN> H 12:52 Direct-scan Memory-scan Upload ↑ ENTER ↓ D> H 12:52 ESC SCAN MAIN 2b. BT is disconnected. D> H 12:52 Off line !!! …Linking! ESC SCAN MAIN If BT is disconnected, please back to page #2 and do the pairing procedure again. 2. Memory-scan Mode 1. select Memory-scan 2. begin to scan the barcodes MAIN> H 12:52 Direct-scan Memory-scan Upload ↑ ENTER ↓ M> H 12:52 ESC SCAN MAIN Under Memory-scan mode, enable/disable “Quantity entry” function Disable “Quantity entry” (default) 1. disable “Quantity entry” Setting code 2. begin the scan the barcodes Demo %Q%S%D M> H 12:52 ESC SCAN MAIN 3. press DEL to delete the last barcode data 4. be sure that you want to delete the last barcode. M> H 12:52 1234567 ESC SCAN DEL M> H 12:52 The last code Will be deleted ! Are you sure ? NO YES Enable “Quantity Entry” function, decide the order of the output data to your device first 1. Q’ty first, then, barcode 2. Barcode first, then, Q’ty Demo %Q%I%B Demo %Q%I%A 3. Enable “Quantity Entry” Setting code 4. begin the scan the barcodes Demo %Q%S%E M> H 12:52 SCAN: Q’ty: 000 ESC SCAN ENTER When “Quantity Entry” is enabled, decide how to type-in the number. By button (default) By scanning the number code C1. enable D1. enable Demo %Q%K%N Demo %Q%K%F C2. scan the barcode D2. scan the barcodes M> H 12:52 SCAN: Q’ty: 1 ESC SCAN ENTER M> H 12:52 Q’ty: 1 ESC SCAN ENTER C3. Press the ENTER to type the q’ty D3. Press the ENTER to type the q’ty M> H 12:52 1234567 Q’ty: 1 ESC SCAN ENTER M> H 12:52 7654321 Q’ty: 1 ESC SCAN ENTER C4. press ↓ to choose number, then, press ENTER to confirm D4. scan numeric code (page #5) M> H 12:52 Q’ty: 5--- ESC ENTER ↓ M> H 12:52 Q’ty: 5--- ESC ENTER 5. Then, scan the next barcode 5. end by X code, then, be ready to scan the next M> H 12:52 SCAN: Q’ty: 1 ESC SCAN ENTER M> H 12:52 SCAN: Q’ty: 1 ESC SCAN ENTER Upload data (Memory-scan) 1. press ESC, select Upload 2. BT connected, press START to send data MAIN> H 12:52 Direct-scan Memory-scan Upload ↑ ENTER ↓ U> H 12:52 Push START key to send data… ESC START MAIN 3. After data upload, press ERASE to delete memory data 4. be sure that you want to delete memory data. U> H 12:52 ESC SPEED ERASE U/E> H 12:52 Data in memory Will be erased! Are you sure? NO YES 5. After you delete the memory data, it will be back to MAIN MENU Switch from Memory-scan to Direct-scan mode 1. switch Memory-scan to Direct-scan mode 2. must delete all data in the memory D> H 12:52 Data in memory will be erased! NO YES Erasing… Completed!!! 3. begin to scan the barcode D> H 12:52 ESC SCAN MAIN Power-saving Mode 1. Main MENU 2. select Setup MAIN> H 12:52 Direct-scan Memory-scan Upload ↑ ENTER ↓ MAIN> H 12:52 Memory-scan Upload Setup ↑ ENTER ↓ 3. select Sleep time 4. press ↓, decide the time to enter sleeping mode S> H 12:52 BT setup Sleep time Output Speed ESC ENTER ↓ S/P/S> H 12:52 Sleep time 00 ESC ENTER ↓ * When charging, the scanner will not enter power-saving mode automatically.

please choose the correct speed. 1. Main MENU 2. select Setup MAIN> H 12:52 Direct-scan Memory-scan Upload ↑ ENTER ↓ MAIN> H 12:52 Memory-scan Upload Setup ↑ ENTER ↓ 3. select Output Speed 4. select the speed type, S> H 12:52 BT setup Sleep time Output Speed ESC ENTER ↓ S/O> H 12:52 Medium Low Extra low 1 ESC ENTER ↓ RTC (Real-time clock) 1. Main MENU 2. select Setup MAIN> H 12:52 Direct-scan Memory-scan Upload ↑ ENTER ↓ MAIN> H 12:52 Memory-scan Upload Setup ↑ ENTER ↓ 3. select Time 4. select Stamp S> H 12:52 Sleep time Output Speed Time ESC ENTER ↓ S/T> H 12:52 Stamp Format Data ESC ENTER ↓ 5. select Data Stamp 6. Data Stamp is on or off. S/T/S> H 12:52 Data Stamp Time Stamp Interval char. ESC ENTER ↓ S/T/S/D> H 12:52 Data Stamp On Off ESC ENTER ↓ 7. press ESC, select Time Stamp 8. Time Stamp is on or off S/T/S> H 12:52 Data Stamp Time Stamp Interval char. ESC ENTER ↓ S/T/S/T> H 12:52 Time Stamp On Off ESC ENTER ↓ 9. press ESC, select Interval char. 8. select Interval char. S/T/S> H 12:52 Data Stamp Time Stamp Interval char. ESC ENTER ↓ S/T/S/T> H 12:52 Interval char. , ESC ENTER ↓ The format of Date setting 1. Main MENU 2. select Setup MAIN> H 12:52 Direct-scan Memory-scan Upload ↑ ENTER ↓ MAIN> H 12:52 Memory-scan Upload Setup ↑ ENTER ↓ 3. select Time 4. select Format S> H 12:52 Sleep time Output Speed Time ESC ENTER ↓ S/T> H 12:52 Stamp Format Data ESC ENTER ↓ 5. select the format of date S/T/F> H 12:52 MM/DD/YY DD/MM/YY YY/MM/DD ESC ENTER ↓ Date setting 1. Main MENU 2. select Setup MAIN> H 12:52 Direct-scan Memory-scan Upload ↑ ENTER ↓ MAIN> H 12:52 Memory-scan Upload Setup ↑ ENTER ↓ 3. select Time 4. select Data S> H 12:52 Sleep time Output Speed Time ESC ENTER ↓ S/T> H 12:52 Stamp Format Data ESC ENTER ↓ 5.set the date, press ↓ to select number, then, press ENTER to go to the next 6. Save the date data S/T/D> H 12:52 MONTH(01-12):01 Date (01-31):01 Year (00-99):00 ESC ENTER ↓ Save it ? NO YES Time setting 1. Main MENU 2. select Setup MAIN> H 12:52 Direct-scan Memory-scan Upload ↑ ENTER ↓ MAIN> H 12:52 Memory-scan Upload Setup ↑ ENTER ↓ 3. select Time 4. select Clock S> H 12:52 Sleep time Output Speed Time ESC ENTER ↓ S/T> H 12:52 Format Data Clock ESC ENTER ↓ 5. set the time. Press ↓ to select the number, then, press the ENTER to go the next 6. save the time setting S/T/T> H 12:52 Hour (00-23):00 Min (00-59):00 Sec (00-59):00 ESC ENTER ↓ Save it ? NO YES Trigger Mode Demo %R%T%E Trigger always (Trigger available at any time) Demo %R%T%D Trigger standard (Default) (Trigger available, after data sent to the device)

barcode data Demo %C%P%S Demo %C%S%S prefix suffix 1. Scan above configuration code for Prefix or Suffix 2. Enter the required values (right, numeric barcode) for Prefix or Suffix using the hex values for the desired HEX values from Prefix & Suffix TABLE (below page)” 3. Then, end by scanning Code X (below, right) * The max. of special characters is 5. * When you append 1~4 required values for Prefix or Suffix, it must end with Code X. * It doesn’t need Code X, if you append 5 values to barcode data. How to delete Prefix or Suffix 1. Scan above configuration code for Prefix or Suffix 2. Enter the “0” “0” (above, right) 3. Then end by scanning Code X (below, right) Numeric barcode for settings Demo 0 Demo 6 Demo C Demo 1 Demo 7 Demo D Demo 2 Demo 8 Demo E Demo 3 Demo 9 www.tec-it.com F Demo 4 Demo A Demo 5 Demo B Demo X Prefix & Suffix TABLE HEX HID (SPP) HEX HID (SPP) HEX HEX HEX HEX 01 CTRL A (SOH) 19 CTRL Y (EM) 20 SPACE 38 8 50 P 68 h 02 CTRL B (STX) 1A CTRL Z(SUB) 21 ! 39 9 51 Q 69 i 03 CTRL C (ETX) 1B ESC (ESC) 22 " 3A : 52 R 6A j 04 CTRL D (EOT) 1C CTRL \ (FS) 23 # 3B ; 53 S 6B k 05 CTRL E (ENQ) 1D CTRL ] (GS) 24 $ 3C < 54 T 6C l 06 CTRL F (ACK) 1E CTRL ^ (RS) 25 % 3D = 55 U 6D m 07 CTRL G (BEL) 1F CTRL _ (US) 26 & 3E > 56 V 6E n 08 Backspace (BS) 27 ' 3F ? 57 W 6F o 09 Tab (HT) 28 ( 40 @ 58 X 70 p 0A CTRL J (LF) 29 ) 41 A 59 Y 71 q 0B CTRL K (VT) 2A * 42 B 5A Z 72 r 0C CTRL L (FF) 2B + 43 C 5B [ 73 s 0D Enter (CR) 2C , 44 D 5C \ 74 t 0E CTRL N (SO) 2D - 45 E 5D ] 75 u 0F CTRL O (SI) 2E . 46 F 5E ^ 76 v 10 CTRL P (DLE) 2F / 47 G 5F _ 77 w 11 CTRL Q (DC1) 30 0 48 H 60 ` 78 x 12 CTRL R (DC2) 31 1 49 I 61 a 79 y 13 CTRL S (DC3) 32 2 4A J 62 b 7A z 14 CTRL T (DC4) 33 3 4B K 63 c 7B { 15 CTRL U (NAK) 34 4 4C L 64 d 7C | 16 CTRL V (SYN) 35 5 4D M 65 e 7D } 17 CTRL W (ETB) 36 6 4E N 66 f 7E ~ 18 CTRL X (CAN) 37 7 4F O 67 g Barcode Configuration Method: (Flow chart for setup procedure :) Start Configuration End Configuration Demo W010F01 Demo W010F00 1D Symbologies – 1 ENABLE CODE 39 DISABLE Demo . Demo . ENABLE CODE 39 Transmit Start/Stop Character DISABLE Demo . Demo . ENABLE CODE 39 FULL ASCII DISABLE Demo . Demo . ENABLE EAN-8 DISABLE Demo . Demo . ENABLE EAN-13 DISABLE Demo . www.tec-it.com . ENABLE Industrial 25 DISABLE Demo . Demo .

(Flow chart for setup procedure :) Start Configuration End Configuration Demo W010F01 Demo W010F00 1D Symbologies – 2 ENABLE GS1-Databar (RSS) DISABLE w w w .tec-it.com . Demo . ENABLE GS1-Databar (RSS-Limited) DISABLE Demo . Demo . ENABLE GS1-Databar (RSS-Expand) DISABLE Demo . Demo . ENABLE GS1-128 UCC/EAN-128 DISABLE Demo . Demo . ENABLE CODE 93 DISABLE Demo . Demo . 1D Symbologies – 3 ENABLE ISSN DISABLE Demo . Demo . ENABLE ISBN DISABLE Demo . Demo . ENABLE UPC-E DISABLE Demo . Demo . ENABLE UPC-A DISABLE Demo . Demo . ENABLE Interleaved 25 DISABLE Demo . Demo . ENABLE Matrix 25 DISABLE www.tec-it.com . Demo . ENABLE CODE 11 DISABLE Demo . Demo . ENABLE CODABAR DISABLE www.tec-it.com . Demo . ENABLE MSI DISABLE Demo . Demo . 1. Pull out the USB cover its slot 2. Press inward firmly on the USB cover to reattach it Top Bottom Insert a thin object (e.g. a bent paper clip) into the small hole. To click the reset button inside Quick guide is subject to change without notice. R_180808_01 Pressing direction Reset