Weider 9025 Operation & User’s Manual

Text of Weider 9025 Operation & User’s Manual

Read all precautions and instruc-

tions in this manual before using this equipment. Save this manual for future reference. USER'S MANUAL Model No.WEEVSY20230 Serial No. Write the serial number in the space above for reference. Serial Number Decal (under seat) QUESTIONS? As a manufacturer, we are committed to providing com- plete customer satisfaction. If you have questions, or if there are missing parts, please call: Or write: ICON Health & Fitness

WARNING DECAL PLACEMENT

2 TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Weider 9025 WARNING: To reduce the risk of serious injury, read the following important precautions

before using the weight system. 1. Read all instructions in this manual and in the accompanying literature before using the weight system. 2. It is the responsibility of the owner to ensure that all users of the weight system are ade- quately informed of all precautions. 3. The weight system is intended for home use only. Do not use the weight sy

BEFORE YOU BEGIN

Thank you for selecting the versatile WEIDER® 9025 weight system. The weight system offers a selection of weight stations designed to develop every major mus- cle group of the body. Whether your goal is to tone your body, build dramatic muscle size and strength, or improve your cardiovascular system, the weight sys- tem will help you to achieve the specific results you want. For your benefit, read this manual carefully before using the

Attach a Base Cap (32) to the Stabiliser (2) with

two M4 Washers (75) and two M4 x 16mm Self- tapping Screws (74). Attach another Base Cap to the Stabiliser in the same manner. Insert two M8 x 67mm Carriage Bolts (82) and an M10 x 67mm Carriage Bolt (107) up through the Stabiliser (2). It may be helpful to place a piece of tape over the bolt head to hold it in place. 5 1 107 32 2 82 75 74 32 Before beginning assembly, carefully read the following inform

See the inset drawing. Press a 50mm Square

Inner Cap (31) into the Base (1). Insert two M10 x 65mm Carriage Bolts (81) up through the Base. It may be helpful to place a piece of tape over the bolt head to hold it in place. Attach the Base (1) and the Rear Upright (3) to the Stabiliser with the indicated M8 x 67mm Carriage Bolts (82) and two M8 Nylon Locknuts (73). Do not tighten the Locknuts yet. Attach the Support Bracket (33) to the M10 x 67mm Carriag

Insert two Weight Guides (5) into the Base (1).

Make sure that the holes are on the top. Slide two Weight Bumpers (44) onto the Weight Guides (5). Slide the nine Weights (16) onto the Weight Guides. Press the Weight Tube Bumper (17) into the Weight Tube (18). Insert the Weight Tube into the stack of Weights (16) as shown. Lubricate the indicated holes in the Top Weight (19) with grease. Slide the Top Weight onto the Weight Guides (5). Make sure the pi

Weider 9025 Press two 38mm Square Bushings (35) into the

Right Pedal (14); Attach a Pedal Cover (36) to the Pedal with two M4 x 16mm Self-tapping Screws (74) and two M4 Washers (75). Lubricate the pedal axles on the Rear Upright (3). Slide the Right Pedal (14) onto the pedal axle. Make sure that the Pedal is on the c

Attach a Cable Pivot (58) to the Right Fly Arm (9)

with an M10 x 50mm Bolt (85) and an M10 Nylon Locknut (72). Do not overtighten the Locknut; the Cable Pivot must be able to pivot easily. Press a 40mm x 50mm Inner Cap (23) into the Right Fly Arm (9). Lubricate an M10 x 83mm Button Head Bolt (86) and the flat sides of two Plastic Washers (59) with grease. Attach the Right Fly Arm (9) to the indi- cated side of the Butterfly Frame (11) with the Bolt, t

12. Slide a Grip (41) onto a VKR Handle (42). Attach

the VKR Handle to the Left VKR Arm (13) with an M10 x 55mm Bolt (80), two M10 Washers (71), a 7mm Spacer (43), and an M10 Nylon Locknut (72). Press a 25mm Round Inner Cap (105) into the bottom of the VKR Handle (42). Repeat this step with the Right VKR Arm (12). 13. Locate the Butterfly Cable (55). Attach the Cable to the indicated Cable Pivot (58) with an M8 x 20mm Shoulder Bolt (93) and an M8 Nylon

18. Locate the Short Cable (94). Attach the Cable to

the Front Upright (4) with an M10 x 72mm Bolt (89), an M10 Washer (71), and an M10 Nylon Locknut (72). 17. Attach the Butterfly Cable (55) to the indicated Cable Pivot (58) with an M8 x 20mm Shoulder Bolt (93) and an M8 Nylon Locknut (73). 19. Wrap the Short Cable (94) under a 90mm Pulley (46). Attach the

Weider 9025 22. Route the High Cable (57) over a 90mm Pulley

(46) and down through the Top Frame (6). Attach the Pulley inside the Top Frame with an M10 x 68mm Bolt (87), two M10 Washers (71), two 12mm Spacers (54), and an M10 Nylon Locknut (72). 23. Route the High Cable (57) under a 90mm Pulley (46). Attach the Pulley and two Pulley Covers (49) to the upper set of holes in the two Pulley Plates (50) with an M10 x 53mm Bolt (88) and an M10 Nylon Locknut (72). Make

26. Locate the Low Cable (56). Route the Cable

through the Front Upright (4) and under a 90mm Pulley (46). Attach the Pulley and two Pulley Covers (49) inside the Upright with an M10 x 68mm Bolt (87), two M10 Washers (71), two 10mm Spacers (45), and an M10 Nylon Locknut (72). Make sure the large tabs on the Pulley Covers are in the indicated position. 27. Route the Low Cable (56) over a 90mm Pulley (46). Attach the Pulley and two Pulley Covers (49) to t

31. Attach a VKR Arm Pad (64) to the Left VKR Arm

(13) with two M6 x 53mm Screws (70) and two M6 Washers (69). Repeat this step with the Right VKR Arm (12). 32. Attach a VKR Back Pad (63) to the Rear Upright (3) with two M6 x 65mm Screws (77) and two M6 Washers (69). 33. Attach the Backrest (61) to the Front Upright (3) with two M6 x 65mm Screws (77) and two M6 Washers (69). 34. Press a 38mm Square Inner Cap (29) into the Seat Frame (7). Attach the Seat

35. Press a 38mm Square Inner Cap (29) into the

Leg Lever (8). Attach the M10 x 63mm Eyebolt (97) to the Leg Lever (8) with an M10 Large Washer (108) and an M10 Nylon Locknut (72). Lubricate an M8 x 57mm Bolt (79) with grease. Attach the Leg Lever (8) to the Seat Frame (7) with the Bolt and an M8 Nylon Locknut (73). Do not overtighten the Locknut; the Leg Lever must be able to pivot easily. 36. Press two 19mm Round Inner Caps (27) into a Pad Tube (26). Sli

Weider 9025 The instructions below describe how each part of the weight system can be adjusted. IMPORTANT: When

attaching the lat bar or handle, make sure that the accessories are in the correct starting position for the exercise to be performed. If there is any slack in the cable or chain as an exercise is performed, the effectiveness of the exercise will be reduced. CHANGING THE WEIGHT SETTING To change the weight setting, insert the Weight Pin (20) un

CONVERTING THE BUTTERFLY ARMS

To use the Fly Arms (9, 10) as butterfly arms, insert the “L”-pins (100) into the butterfly holes in the Front Upright (4) and the tab on the back of the Butterfly Frame (11). To use the Fly Arms (9, 10) as press arms, insert the “L”-pins (100) into the press holes in the Butterfly Frame (11). Make sure that the “L”-pins (100) are fully inserted into the same set of holes before performing any exercises. ATTACHING

WEIGHT RESISTANCE CHART

The chart below shows the approximate weight resistance at each exercise station. “Top” refers to the 6 lb. top weight. The other numbers

Make sure all parts are properly tightened each time the weight system is used. Replace any worn parts immedi-

ately. The weight system can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents. TIGHTENING THE CABLES Woven cable, the type of cable used on the weight system, can stretch slightly when it is first used. If there is slack in the cables before resistance is felt, the cables should be tightened. Sl

Weider Other Owners Instructions: