Universal Space MR.WOLF Operation Manual
Text of Universal Space MR.WOLF Operation Manual
Universal Space Amusement (HK) Co.,Ltd
Parts, Service and Distribution call
852-24076810
(1) Rated power supply :AC110V/220V 50/60Hz
(Note:As the actual voltage, please refer the label of the machine.)
(2) Dimensions :W695×D882×H1859(mm)
(3) Environment Condition:Temperature(indoor):-10°C~+40°C
Environment Condition:Humidity:≤90%
Environment Condition:Atmospheric pressure:86Pa~106Pa
Universal Space MR.WOLF 2-2. Game Leveling
1. Install this machine on a flat surface. Adjust levelers to lift casters off the
ground and level game.
● For indoor use only!
WARNING
This machine is designed for indoor use only.Never install this machine outdoors
or at any of the flowing:
● Places where dew may develop due to temperature differences
● Locations close to hazardous article
● Locations close to a heating
2. When moving to far distance, the machine must be packed. When packing
or binding the machine, it must be packed with a bolster on surface in order to
protect the machine.
2-3. Maintenance
Open the rear door of the machine can maintain inside.
● Unplug game before moving.
● The unbending moving、turnover and transport will attaint the machine.
WARNING
Level adjustor
Caster
Move
Approx. 5mm
Fix
Universal Space MR.WOLF Connecting the power cord
电源插座
电源插头
电源线
电源插头
电源线盒
1. Insert the socket end of power cord into the power input of the game.
2. Insert the power cord plug into a service outlet.
WARNING
● Do not put heavy items on power cord.
● Hold the power plug instead of the wire to draw the power cord out
of the socket.
● Do not touch the power plug with a wet hands.
● Do not draw or twist the cord or near a heat sourc
4 Instructions for play
1. Insert coins, the game starts.
2. Hit the wolfs with a hammer to get score. The score will be displayed on
score LED. The more score you get, the more tickets you get.
3. When the time is over, the game is over.
5 Switches control signal and illuminate
1 Refer the attached I/O chart and the schematic.
2 To adjust DIP, please refer the I/O chart. The initial setting is in
capitalization.
3 Main board:
4. Adjust DIP: (the in
6 Maintenance and inspections
1. Remove power before servicing game.
To avoid short circuit, the power must be removed before touching inside. If
you have to switch on the power, please refer the operation manual.
2. Choose the appropriate replacement parts.
Using the wrong parts will lead to short circuit or break down the main board.
3. Do not unbending remove, install or change equipment.
It will lead to short circuit and machine malfunction even can
7 Parts list
7-1 Front door:
1. Coin mech:Use for insert coins which is fit for this machine.
2. Tickets payout:Tickets will be come out when the game is over.
3. Lock 2222:Open the coin door.
7-2 Power socket:
This machine’s supply voltage is 110V±5% 60Hz, or 220V±5% 50Hz”.
For actual supply voltage, please refer the label of the machine.
Fuse specifications
110V 60Hz use 110V 5Aφ5-20mm
220V 50Hz use 220V 3Aφ5-20mm
Power switch: Main ga
8 Overall construction
8-1
Game Components
1. Coin mech
2. Front panel
3. Upper panel
4. Side panel
5. Up and down mechanism
6. Flat assy.
7. Wolf
8. Marquee assy
9. Marquee support
10 Rear door
11 door
12 Back panel
13 Circuit board
14 Bottom panel
15 Wheel
4