Schacht TL1105 Assembly Instructions

Text of Schacht TL1105 Assembly Instructions

Find out more at schachtspindle.com

Schacht Spindle Company 6101 Ben Place Boulder, CO 80301 p. 303.442.3212 f. 303.447.9273 © 2020 Schacht Spindle Company, Inc. 07.20 TL1105 TL1106 TL1107

– 2 –

TABLE LOOM FLOOR STAND Assembly InstructIons 1. Place the two cross braces horizontally in front of you, with holes facing up. 2. Identify the two inside legs with the blocks attached, and set these parts perpendicular to the cross braces. The blocks should be at the top, facing outward. 3. Attach the lower cross brace: Insert a barrel nut into eac

– 3 –

then from the outer side of the stand, insert the carriage bolt through the top hole in an outside leg. Then place a #12 SAE washer on the carriage bolt and secure the bolt with a 10-24 lock nut. 6. From the inner side of the stand, insert a 1/4-20 x 1-1/2" carriage bolt through the top hole of the inside leg. From the outside of the stand, place t

– 4 –

RETROFITTING AN OLDER TABLE LOOM FOR THE FLOOR STAND If you have an older model table loom without holes in the underside of the base, you need to drill holes in your loom as follows: 1. Remove the castle from the loom. Place the loom upside down on a firm surface. 2. Drill four holes into the loom sides using a 5/16" drill bit and the wooden drill

Schacht Weaving Owners Instructions: