Uni-max 80202 Operation & User’s Manual

Type: 80202 Date of manufacture: Date of sale, stamp, signature: Serial number (product series): Repair centre notes: Without the correctly filled warranty card or without proof of purchase receipt, including the product type (invoice, purchase receipt) no warranty claim will be processed. ...

Our company is ready to offer you our services - before, during and after you buy our product. If you have any question, comment or idea, please contact our business centre. We will do our best to address your comment or question in timely matter. Before first use, please ...

in accordance with valid rules and regulations. Result report: DATE REVISION TECHNICIAN Number / SIGNATURE REVISION REPORT 3 • This device may be used by a qualified person, 18 years or older who has been trained in work and environmental safety proc ...

• Make sure no children, unauthorized persons or animals have access to your workshop. • Never put your hands or legs inside the working area. • Never leave your machine unattended during operation. • Use only for purposes for which it has been designed. • Use personal protective gear such as safe ...

When you finished your work, disconnect the power plug from the wall outlet and switch off the main switch. • Never carry electrical tools and appliances by their power cord. When disconnecting the plug from the wall outlet, n ...

table etc. • After switching the machine off, wait until the saw blade comes to a complete stop. Then remove the blade from the work piece. • Do not place your hands under the work piece. • Do not touch the saw blade or the work piece immediatel ...

set to the minimum. The power cable must be disconnected from the wall outlet. • Keep your tools clean. Dirt from tools may enter the inner machine mechanism and cause damages to the tools or machine. • Do not use aggressive cleaning solution o ...

• Connect the power cable plug to the wall outlet. • Before switching your machine on set the speed (rpm) regulator to the lowest value. To do so, turn the knob on the handle towards you. • After you have connected the power cable, press the safety button 1 and at the same time press the main switch 2. • You must keep ...