ThinkEco modjet TE1211E Operation & User’s Manual

3G LED (only on 3G model) ZigBee interface LED Power LED Error LED Run LED AC/DC power supply LAN connector Reset button WAN connector LAN interface LED LED light overview LED Status Identification Power On (Green) Power On RUN On (Green) POST is successful ERROR On (Red) POST f ...

Off No device is connected On (Orange) A 10/100 Mbps device is connected to the port Flashing (Orange) A 10/100 Mbps device is transmitting or receiving to the port On (Green) A 1000 Mbps device is connected to the port Ethernet WAN Port Link/ACT Flashing (Green) A 1000 Mbps device is transmitting or receiving to the port O ...

 1 power cord (included)  1 Ethernet cord (included) INSTRUCTIONS 1. Determine your gateway’s Ethernet Mac address  Look on the bottom of your gateway for the Ethernet MAC address and write it down. 2. Plug in modlet gateway  Plug in the modlet gateway into an electrical outlet using the pow ...

1. Check gateway Make sure your gateway is correctly connected  AC/DC adapter plugged in (POWER led ON)  LAN cable plugged in (WAN led flashing)  ZigBee module in operative mode (ZigBee led ON) Next res ...

Modlet® gateway PACKING LIST 1 modlet gateway TE1211E 1 Cable Ethernet, 6FT min 1 AC/DC Power supply, 110V/240V Input, 12V/1A output ThinkEco modlet® gateway Thank you for purchasing your new modlet® gateway! For more information and to learn about your modlet® g ...

residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarante ...

THE USE OF TE PRODUCTS WILL BE SECURE, TIMELY, UNINTERRUPTED OR ERROR-FREE OR OPERATE IN COMBINATION WITH ANY OTHER HARDWARE, SOFTWARE, SYSTEM OR DATA, (B) TE PRODUCTS WILL MEET CUSTOMER’S REQUIREMENTS OR EXPECTATIONS, (C) ANY STORED DATA WILL BE ACCURATE OR RELIABLE, (D), TE PRO ...