Electro-Voice P3000RL Brochure & Specs
Text of the manual
CLEAR SET-UP AND CONFIGURATION
Select amplifier type and activate through
"drag and drop."
Each amplifier is displayed showing address,
operation mode, input level, and network mode
(on-line/off-line). Double-click on one amplifier
link to the individual control panel for more
detail.
Amplifiers and channels may be assigned to
control groups on customized gr
STATE-OF-THE-ART SIGNAL PROCESSING WITH 24 FILTERS,
5 DELAYS , 2 COMPRESSORS AND 2 LIMITERS
Menu control for selection of DSP parameters, speaker assign,
impedance monitoring or protocol.
Each block of DSP functions shows the amount of active parameters.
Filter response, delay times and dynamic settings are displayed as a thumbnail.
The DSP functions are:
Ma
RANGE OF AMPLIFIERS FOR HIGH AND
LOW-IMPEDANCE APPLICATIONS
P3000 RL
The flagship, with 2 x 1300 watts into 4 ohms and 2 x 1800 watts into 2 ohms,
the digital controlled version of the legendary P3000 amplifier. Loudspeaker
outputs on Neutrik Speakon® NL4 connectors.
P1200 RL
The universal with 2 x 600 watts into 4 ohms and 2 x 850 watts into 2 Ohms.
Loudsp
AUDIO PERFORMANCE, REMOTE CONTROL AND
SUPERVISION AT THE HIGHEST LEVEL
Electro-Voice is famous for its 75 years of experience in designing
and manufacturing loudspeakers and microphones. Many audio
professionals, however, don’t know that it also has 50 years of
design experience in power amplifiers and more than 20 years in
digital audio processing.
An unw
SMALL SYSTEM CONFIGURATION — HOUSE OF WORSHIP
MEDIUM SYSTEM CONFIGURATION — PERFORMING ARTS CENTER
FRi+152/64
FRi+152/64
FRi+122/64
FRi+2082
QRx153/75
QRx153/75
QRx153/75
QRx153/75
QRx153/75
RJ-45 CAN
bus (out)
To Amp 2
GP1 and GP2
connectors
RJ-45 CAN
bus (in)
Audio inputs
(from mixer)
Switch panel (8 switches)
1
2
3
4
RJ-45 CAN
bus (out)
To Amp 2
RS-23
LARGE SYSTEM CONFIGURATION — ARENA
PC control station
UCC-1
converter
FRi+122/64 (two per amp)
FRi+122/64 (two per amp)
Sx300PI (two per amp)
EVID 4.2 (70/100V)
¥ Up to 100 amplifiers per CAN bus
¥ Up to 250 amplifiers per system
¥ Up to 1000m per run
¥ Single run: No loop requirements
NOTE: All amps link through CAN bus
Audio signal
Audio signal
1
2
3
TECHNICAL DATA AND SPECIFICATIONS
Amplifier
P900 RL
P1200 RL
P3000 RL
P900 RT
P1200 RT
8Ω
4Ω
2Ω
8Ω
4Ω
2Ω
8Ω
4Ω
2Ω
100V
70 V
100V
70 V
Continous Output Power (1 kHz, THD 1%)
280 W
450 W
650 W
380 W
600 W
850 W
850 W
1300 W 1800 W
410 W
400 W
590 W
580 W
Rated Output Power (20 Hz-20 kHz, THD <0,2%)
230 W
350 W
450 W
300 W
500 W
650 W
750 W
12