Sauder 535782 Assembly Instructions Manual

BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. sauder.com CONTACT US FIRST BEFORE MAKING ANY RETURNS TO THE STORE. Share your journey! sauder.com CONTACT US FIRST BEFORE MAKING ANY RETURNS TO THE RETAILER. You'll love what we have in storage. English pg 1-18 Fr ...

Hardware Identifi cation Assembly Steps Français Español Safety Warranty No. 2 Phillips Screwdriver Tip Shown Actual Size Table of Contents Assembly Tools Required Hammer Not actual size 3 4 5-18 19-21 22-24 25-26 27 Page 2 Electric drill with 1/8" bit (ONLY in indicated step) ...

å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts. Now you know our ABCs. M RIGHT END (1) N LEFT END (1) O UPRIGHT (1) P TOP (1) Q BOTTOM (1) R SHELF (1) S BACK (1) T RIGH ...

å Screws are shown actual size. You may receive extra hardware with your unit. APPLIQUE - 30 26 SHELF SUPPORT - 16 30 FELT DISC - 4 32 FURNITURE TIPPING RESTRAINT KIT - 1 98 ANGLE BRACKET - 5 22 METAL BRACKET - 2 27 NAIL - 36 31 MAGNETIC CATCH - 2 28 STRIKE PLATE - 2 29 1/2" FLAT HEAD SCREW - 12 35 1-1/2" FLAT HEAD SCREW - 40 33 1 ...

video assembly tip is available at www.sauder.com/service/tips å Assemble your unit on a carpeted fl oor or on the empty carton to avoid scratching your unit or the fl oor. å Fasten fi ve ANGLE BRACKETS (22) to the SKIRT (X). Use fi ve 1/2" PAN HEAD SCREWS (16). å NOTE: Be sure the edges of the ANGLE BRACKETS are ...

PAN HEAD SCREWS (16) through the ANGLE BRACKETS on the SKIRT and into the BOTTOM. Step 2 Page 6 X Q 1/2" PAN HEAD SCREW (3 used in this step) 16 Surface without MAGNETIC CATCHES ...

and fasten the SAFETY STRAP to the TOP (P). Use the short screw through the hole in the strap and into the top surface of the TOP (P). å Fasten the VALANCES (W) to the TOP (P). Use eight 1-1/2" FLAT HEAD SCREWS (33). Step 3 Page 7 98 SAFETY STAP SHORT SCREW P P W W 1-1/2" FLAT HEAD SCREW (8 used in this step ...

Use two 1/2" PAN HEAD SCREWS (16). å NOTE: Be sure the edges of the METAL BRACKETS are even with the top edge of the UPRIGHT. å Fasten the BOTTOM (Q) to the UPRIGHT (O). Use two 1-1/2" FLAT HEAD SCREWS (33). Step 4 Page 8 Do not stand the unit upright without the BACK fastened. The unit may collapse. ...

two 1-1/2" FLAT HEAD SCREWS (33). å Fasten the SHELF (R) to the UPRIGHT (O). Use two 1-1/2" FLAT HEAD SCREWS (33) å Finish fastening the SHELF (R) to the UPRIGHT (O). Use two 1/2" PAN HEAD SCREWS (16) through the METAL BRACKETS on the UPRIGHT and into the SHELF. å Then, peel four APPLI ...

good time to refresh your drink. å Fasten the LEFT END (N) to the TOP (P), BOTTOM (Q), SHELF (R), VALANCES (W), and SKIRT (X). Use thirteen 1-1/2" FLAT HEAD SCREWS (33). å Finish fastening the LEFT END (N) to the SKIRT (X). Use a 1/2" PAN HEAD SCREW (16) through the ANGLE BRACKET on the SKIRT and into the LEFT END. Q R W X P ...