Sanus VLT5 Instruction Manual

Scan for easy install video http://san.us/408 We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. We’re ready to help! ...

Does your TV weigh more than 125 lb (56 kg) including accessories? No — Perfect! Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call 1-800-359-5520 (UK: 0800-056-2853) to fi nd a compatible mount. Ready to begin? Please read through ...

TV Screws TV Washers 04 x4 06 x4 09 x4 07 x4 08 x4 03 x4 05 x4 NOTE: Not all hardware included will be used. WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are ...

Hand thread screws into the threaded inserts on the back of your TV to determine which screw diameter (M4, M5, M6, or M8) to use. 1-2 Spacers CAUTION: Verify adequate thread engagment of the screw/ spacer combination on your TV. Too short will not hold the TV and too long will damage the TV. M4 M6 M8 M5 Moun ...

Spacer, screw and washer Center the TV brackets 01 and 02 over your TV hole pattern as shown - making sure the brackets are level. NOTE: The adjustment knobs on TV brackets 01 and 02 should be oriented to the outside edges. Install using the spacer, screw and washer combination you selected for your TV. 09 07 08 03 04 05 06 Adju ...

(ICD) is in use, magnetic fi elds may aff ect the operation of those devices, resulting in serious injury or death. If you have an implanted medical device, keep at least 13 cm (5 in.) between your device and the magne ...

1 2 3 CAUTION: Avoid potential personal injuries and property damage! ● Drywall covering the wall must not exceed 16 mm (5/8 in.) ● Minimum wood stud size: common 51 x 102 mm (2 x 4 in.) nominal 38 x 89 mm (1½ x 3½ in.) ● Minimum horizontal space between fasteners: 406 mm (16 in.) ● Stud centers must be verified – ...

5.5 mm (7/32 in.) 4. Place the wall plate template 10 at your desired height and position the slotted holes over your stud center lines. Level the wall plate template 10 and tape in place. NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.com. IMPORTANT: Be sure you mark and drill into the center o ...

(1/2 in.) 6. Partially install the top two lag bolts 13 , leaving about 13 mm (1/2 in.) space from the wall. NOTE: This space allows you to remove the wall plate template 10 and hang the wall plate 11 onto the top lag bolts 13 . 7. Remove the wall plate template 10 . 10 10 13 ...