Phason SSC-1D Installation Manual

Text of Phason SSC-1D Installation Manual

SSC-1D installation guide
10940304 1 SSC-1D installation guide The Single Stage Control (SSC-1D) automatically controls the temperature in a room by switching fans, lamps, or heaters on or off as the temperature drops below or exceeds the temperature set point. When the SSC-1D is in cooling mode, it switches on the fans when the temperature exceeds th
SSC-1D installation guide
2 2009-09-14 Installing the SSC-1D � The SSC-1D must be installed by a qualified electrician. � Before installing or servicing the SSC-1D, switch OFF the power supply at the source. � Install the SSC-1D and all equipment connected to it according to local electrical codes. � Mount the unit on a sheltered, vertical surface, w
SSC-1D installation guide
10940304 3 Connecting the temperature probe Follow the guidelines below when connecting the temperature probe. � Do not run the probe cable in the same conduit as AC power cables � Do not run the sensor cable beside AC power cables or near electrical equipment. � When crossing other cables or power lines, cross them at
SSC-1D installation guide
4 2009-09-14 Operation The SSC-1D controls the temperature in a room by switching fans, lamps, or heaters on or off as the temperature drops below or exceeds the temperature set point. The set point is the desired room temperature and can be set between 32 and 98°F (0 and 38°C). � When the SSC-1D is in cooling mode, the control
SSC-1D installation guide
10940304 5 Display alerts Alert Description PS The temperature probe or sensor cable has short circuited. PD The temperature probe is damaged or the connecting wire is broken. tS � The Temperature knob has accidentally been turned. The display will alternately flash tS and the ambient temperature. The control will not accep
SSC-1D installation guide
6 2009-09-14 Cleaning the SSC-1D To clean the SSC-1D, wipe the surface with a damp cloth. Be careful when washing the room using a high-pressure washer. DO NOT spray the control using a high-pressure washer, this can damage the control and will void the warranty. Evidence of moisture damage inside the control will void the warranty.

Phason Temperature Controller Owners Instructions: