Vibe Slick Instruction Manual
Text of Vibe Slick Instruction Manual
To ensure maximum performance and safety,
please follow this manual. Please retain the
manual for future reference after installation
Model: SLICK 40 50 60 692 693 57
COAXIAL SPEAKERS
This instruction manual is for your safety and must be adhered to at all times. Please read, ensure that you fully understand
the installation and set up procedures as explained and if you are unclear on the installation or set up of your VIBE SLICK
speakers please contact your nearest authorised VIBE dealer.
Contents
2 x SLICK series speakers.
2 x Grills. (excluding 5x7)
8 x Fixing screws.
1 x Cut out template.
2 Lengths of speaker cable.
War
If necessary cut any material away to allow the speaker to sit correctly.
Cut out the mounting hole and pre-drill any other fixing holes.
If the grill is to be fitted, screw through both gasket and speaker using the screw provided until the speaker is securely fastened.
Grill removal
The Slick speakers feature a removable mesh grill. Please follow the instructions
below to remove the grill.
* Peel the rubber gasket away from the baske
SLICK 40 50 57 60 69.2 69.3
Connection to amplifier
+
+
-
-
Connection to HEAD UNIT
Copyright
All content included in this manual such as text, graphics, logos, icons, images and data, are the property of VIBE Technologies Limited (herein referred to as "VIBE", "us" or "we") and its
affiliate or their content and technology providers, and are protected by United Kingdom and International copyright laws. All rights reserved 2
Revc = 3.4 Ohm
Fo = 86.575 Hz
Sd = 8.659 M
Md = 10.800 g
BL = 3.678 T
Qms = 4.089
Qes = 1.463
Qts = 1.078
No = 0.144 %
SPLo = 83.6 dB
Vas = 3.362 m
Cms = 315.806 u M/N
Krm = 624.587 u Ohm
Erm = 0.862
Mms = 10.701 g
Mmd = 10.238 m Kg
Kxm = 3.611 m H
Exm = 0.719
210 watts peak
70 watts RMS
MIN.input 35 watts RMS
Mount depht 50mm
Mount DIA 100mm
Slick 69.2
Revc = 3.4 Ohm
Fo = 61.077 Hz
Sd = 20.931 M
Md = 27.340 g
BL = 4.928 T
Qms = 4.102
Qes = 1.45
All VIBE products carry a full twelve months manufacturers warranty, valid from
the date of the original receipt / proof of purchase. In order to
validate this warranty, the warranty card should be returned to VIBE
within seven days of the original purchase date. The original receipt
and packaging should also be retained for this twelve month period.
If at any stage during the warranty period you have a problem with the
product then it sh
FLATBASS™ 13 SPK Bass speaker cable
There are many powerful bass amplifiers on today’s market – the ever increasing power is putting huge strains on speaker wire
– VIBE present a new breed of speaker cable specially developed for BASS applications – the VIBE FLATBASS speaker cable
offers SolidCores™ that can handle and sustain considerably more power than conventional speaker cable.
Model: FlatBass 13 SPK – 13 gauge SolidCore™ flat BASS spe
The CriticalLink™ range of FLAT series cabling from VIBE
The VIBE CriticalLink range of cabling has been developed to achieve the critical link between source (headunit), amplifier and speakers –
VIBE audio equipment is high quality, using anything less than the VIBE CriticalLink™ range of cables will severely compromise your
equipment and will not allow it to perform to its maximum potential.
NOTE: Your audio equipment will only ever be as good as t