Moxa Technologies PowerTrans PT-7828 Hardware Installation Manual

Reproduction without permission is prohibited. P/N: 1802077280015 PT-7728/7828 Hardware Installation Guide Moxa PowerTrans Switch Seventh Edition, January 2014 www.ipc2u.ru www.moxa.pro ...

Package Checklist The Moxa PowerTrans switch is shipped with the following items. If any of these items are missing or damaged, please contact your customer service representative for assistance. • 1 Moxa PowerTrans Switch • Hardware Installation Guide • CD-ROM with User’s Manual and SNMP MIB file • Moxa Product Warranty Statement • RJ45 to ...

Dimensions (unit = mm) Fast Ethernet Interface Modules (slots 1, 2, and 3) www.ipc2u.ru www.moxa.pro ...

Gigabit Ethernet Interface Modules (for slot 4) Rack Mounting Use four screws to attach the PT switch to a standard rack. NOTE Two additional rack-mount ears can be ordered as an option. Use them to secure the rear of the chassis in high-vibration environments. Wiring Requirements WARNING Safety First! Be sure to disconnect the power cord before instal ...

Wiring the Relay Contact Each PT switch has one relay output. Refer to the next section for detailed instructions on how to connect the wires to the terminal block connector, and how to attach the terminal block connector to the terminal block receptor. FAULT: The relay contact of the 10-pin terminal block connector are used to detect user-configured e ...

LED Indicators System LEDs LED Color State Description STAT GREEN On System has passed self-diagnosis test on boot-up and is ready to run. Blinking System is undergoing the self-diagnosis test. RED On System failed self-diagnosis on boot-up. PWR1 AMBER On Power is being supplied to the main module’s power input PWR1. Off Power is not being supplied t ...

Mode LEDs LED Color State Description LNK/ACT GREEN On The corresponding module port’s link is active. Blinking The corresponding module port’s data is being transmitted. Off The corresponding module port’s link is inactive. SPEED GREEN Off The corresponding module port’s data is being transmitted at 10 Mbps. On The corresponding module port’ ...

Optical Fiber (100BaseFX) Distance Multi-mode 0 to 5 km, 1300 nm (50/125μm, 800 MHz*km) 0 to 4 km, 1300 nm (62.5/125μm, 500 MHz*km) Single-mode 0 to 40 km, 1310 nm (9/125μm, 3.5 PS/(nm*km)) 0 to 80 km, 1550 nm (9/125um, 19 PS/(nm*km)) Min. TX Output Multi-mode: -20 dBm; Single-mode: -5 dbm Single-mode 80 km: -5 dBm Max. TX Output Multi-mode: -10 dBm ...