Technosoft iPOS80 0 BX-CAN Series Technical Reference

Intelligent Servo Drive for Step, DC, Brushless DC and AC Motors Intelligent Servo Drives Technical Reference  Technosoft 2021 P091.029.iPOS80x0.BX.UM.0521 ...

2 iPOS80x0 BX-CAN/-CAT Technical Reference Table of contents Table of contents ........................................................................................................... 2 Read This First ............................................................................................................... 4 About This Manual ... ...

3 iPOS80x0 BX-CAN/-CAT Technical Reference 3.4.6.1 Differential Incremental Encoder #1 Connection ............................................................................... 22 3.4.6.2 Differential Incremental Encoder #2 Connection ............................................................................... 22 3.4.6.3 Pulse and dir ...

4 iPOS80x0 BX-CAN/-CAT Technical Reference Read This First Whilst Technosoft believes that the information and guidance given in this manual is correct, all parties must rely upon their own skill and judgment when making use of it. Technosoft does not assume any liability to anyone for any loss or damage caused by any error or omission in ...

5 iPOS80x0 BX-CAN/-CAT Technical Reference Related Documentation iPOS8010 BX-CAN Datasheet ( P029.025.E201.DSH) – describes the hardware connections of the iPOS8010 BX CAN family of intelligent servo drives including the technical data and connectors. iPOS8020 BX-CAN Datasheet ( P029.026.E201.DSH) – describes the hardware connections ...

6 iPOS80x0 BX-CAN/-CAT Technical Reference If you Need Assistance … If you want to … Contact Technosoft at … Visit Technosoft online World Wide Web: http://www.technosoftmotion.com/ Receive general information or assistance (see Note) Ask questions about product operation or report suspected problems (see Note) Make suggestions abou ...

7 iPOS80x0 BX-CAN/-CAT Technical Reference 1.2 Cautions CAUTION! THE POWER SUPPLIES CONNECTED TO THE DRIVE MUST COMPLY WITH THE PARAMETERS SPECIFIED IN THIS DOCUMENT CAUTION! TROUBLESHOOTING AND SERVICING ARE PERMITTED ONLY FOR PERSONNEL AUTHORISED BY TECHNOSOFT To prevent electrostatic damage, avoid contact with insulating materials, su ...

8 iPOS80x0 BX-CAN/-CAT Technical Reference 2 Product Overview 2.1 Introduction The iPOS80x0 is a family of fully digital intelligent servo drives, based on the latest DSP technology and they offer unprecedented drive performance combined with an embedded motion controller. Suitable for control of brushless DC, brushless AC (vector control ...

9 iPOS80x0 BX-CAN/-CAT Technical Reference For iPOS80x0 commissioning EasySetUp or EasyMotion Studio PC applications may be used. EasySetUp is a subset of EasyMotion Studio, including only the drive setup part. The output of EasySetUp is a set of setup data that can be downloaded into the drive EEPROM or saved on a PC file. At power-on, t ...

10 iPOS80x0 BX-CAN/-CAT Technical Reference • Various motion programming modes: • Position profiles with trapezoidal or S-curve speed shape • Position, Velocity, Time (PVT) 3rd order interpolation • Position, Time (PT) 1st order interpolation • Cyclic Synchronous Position (CSP) for CANopen mode and EtherCAT® drives. • Cyclic ...