Revo RBL-N Quick Start Manual

The Revo Bluetooth® Remote allows you to trigger your camera and access functions from up to 32 feet away. Use Bluetooth® low-energy technology to wirelessly shoot photos and start and stop videos. Adjust your zoom from wide-angle to telephoto and navigate camera functions and menus. Carry the compact remote in your pocket, so you can keep it handy when you’re on the job. Functions vary depending on camera make and model. Specifications Operating distance: 32 ft. (10 m) Battery type: 3 V CR2032 Operating temperature: 32°F to 104°F (0°C to 40°C) Dimensions (H × W × D): 0.5 × 1.25 × 4.3 in. (12.7 × 32 × 110 mm) ...

trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Revo is under license. Other trademarks and trade names are those of their respective owners. Precautions • Please read and follow these instructions, and keep this manual in a safe place. • There are no user-serviceable parts inside the devices. Do not attempt to disassemble or perform any unauthorized modification. • Do not operate in the presence of flammable gases, vapors, or water. • Batteries are prone to leakage when fully discharged. To avoid damage to the product, be sure to remove the battery when leaving ...

2. Shutter release button 3. Video start/stop You may need to set your camera to video mode. 4. Wide-angle zoom button (−) 5. Telephoto zoom button (+) 6. Multi-selector Functions the same as on the camera and varies between camera models. 7. OK button Confirms menu selection and pauses video recordings. 8. Fn1 button Function is the same as the Fn1 button on the camera. Refer to the camera’s manual for the Fn1 button setup instructions. 9. Fn2 button Function is the same as the Fn2 button on the camera. Refer to the camera’s manual for the Fn2 button setup instructions. 10. Power/Pairing switch 11. Battery compartment c ...

1. Place a coin or similar object into the groove of the battery cover,and turn to the open position to remove the cover. 2. Remove the plastic separator from underneath the battery before use. 3. Insert the CR2032 battery with the (+) facing up. 4. Return the battery cover and turn to the close position. ...

• Make sure the plastic separator is removed from the battery. • Make sure the battery is installed with the correct polarity. • Set your camera for remote triggering. • Make sure the camera and remote are paired together, and you are within range. • Make sure the lock switch is not engaged. Pairing the Remote and Camera Important: See your camera’s manual for instructions on setting your camera to remote pairing mode. Once your camera is ready to pair with the remote, slide and hold the switch down to the pairing position until confirmation appears on the camera’s LCD. The remote’s indicator LED will flas ...

This Revo product is warrantied to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the ...