Pelgrim GVW910L Operating Instructions Manual
Text of Pelgrim GVW910L Operating Instructions Manual
Before washing for the first time
6
Loading the dishwasher
9
Using the dishwasher
13
Settings
15
Care and cleaning
17
Troubleshooting
20
Technical information
21
Installation
22
Service
23
Information for test institute
24
Quick guide
Dear Pelgrim customer!
We hope that you will have many years of use from your new machine.
To get the most out of your new dishwasher, we recommend that you read the operating in
• Read the operating instructions and keep
them in a safe place!
• Number of standard place settings: 13
• Never use the dishwasher for any purpose
other than that specified in these operating
instructions.
• Do not load the dishwasher door or
dishwasher baskets with anything other than
dishes.
• Never leave the dishwasher door open as
someone may trip on it.
• Use only dishwasher detergent!
• This machine can be use
Before washing for the
first time
1. Checking water hardness
In order to achieve good dishwashing results, the dishwasher needs
soft water (water with low mineral content). Hard water leaves a white
coating on dishes and the dishwasher.
Water hardness is specified using the following scales: The German
water hardness scale (°dH) and the French water hardness scale (°fH).
A water supply with a water hardness in excess of 6°dH (9°fH) must
be softened. Th
3. Top up with rinse aid
Drying is faster and a better result is achieved if you use rinse aid. You
will also achieve a better dishwashing result with clear and spotless
dishes.
Press to open
1
Open the rinse aid compartment lid.
2
Carefully top up with rinse aid. Only add rinse aid to the level marked
max.
3
Wipe up any splashes of rinse aid around the compartment.
4
Close the lid firmly.
Top up rinse aid
When the rinse aid needs topping up, the above sym
Loading the dishwasher
Greener dishwashing
Do not rinse under running water
Simply scrape off large food particles before loading the dishwasher.
Choose a green detergent
Read the environmental declaration on the packaging!
Run programmes only with a full load
Wait to run a programme until the dishwasher is full, this way you save
energy. Use the Rinse and hold programme to rinse the dishes if there
are any unpleasant odours while you wait for the dishwash
The dishwasher's baskets
The dishwasher is equipped with an upper basket and a lower basket
with a cutlery basket.
The appearance of the baskets may differ depending on the dishwasher
setup.
Upper basket
Place glasses, cups, bowls, side plates and saucers in the upper
basket. All dirty surfaces should face inwards and downwards! Wine
glasses are placed on the wine glass shelf and knives are placed in
the knife stand on the right (if fitted).
Raising the up
Cutlery basket with lid
The cutlery basket lid can be removed and used, for example, as an
extra cutlery basket in the upper basket (see below).
8
Using the dishwasher
Add detergent
Press to open
1
Prewash detergent compartment
2
Main wash detergent compartment
Detergent is added according to water hardness.
Follow the instructions on the detergent packaging. This dishwasher
is fitted with a water softener, so use detergent and rinse aid doses
suitable for soft water.
Too much detergent can result in less effective dishwashing and also
entails greater environmental impact.
The detergent compartment m
Starting the dishwasher
Select a programme mode
Select any options
Open the door and press the main power switch.
Select the programme
The main power switch
Open the door and press the main power switch. Also turn on the water
tap if it is turned off.
Select a programme
ECO wash is always pre-selected. To select another programme, press
the navigation button
or
until the desired programme is shown on
the display.
Select a programme to s
Improves the dishwashing results, but the dishwasher uses more energy
and water. The programme time is extended.
Select an option
To select an option, press the option button until the desired option is
shown on the display. The available options vary between programmes.
Extra Dry
A higher temperature in the final rinse and a longer drying cycle
improve the drying results if you activate this option. Energy
consumption is slightly increased.
Consumption values 1)
Final rinse
Number
of rinses
Main wash
Prewashes
Programme
mode / Option
Detergent,
compartment 2
(ml)
Programme
Water cons.
(liter)
Hot water 3)
Cold water 2)
Energy
(approx. kWh)
Dishwashing
time
(approx.
hrs:min)
Energy
(approx. kWh)
Dishwashing
time
(approx.
hrs:min)
12.7
0.5
4:50
0.82
5:10
47 °C
3
52 °C
1
25
ECO wash 4)
13
0.6
2:05
1.2
2:25
65 °C
2
60 °C
2
25
Normal wash
15
0.6
1:35
1.2
1:55
65 °C
2
60 °C
2
Open the dishwasher's Settings menu
To open the dishwasher's Settings menu, press the Navigation button
or
until Settings menu is shown on the display and confirm your selection
with the mode selector
.
To exit the dishwasher's Settings menu, select Exit and confirm your selection with the mode selector
.
1� Language
English
Mode selector to confirm current setting
Settings
Current setting
Navigation buttons for choosing setting
Options
Settings
Setting for rinse aid dosage. The rinse aid dispenser can be
adjusted between 0 (Off) and 5 (High dosage).
0/1/2/3/4/5/TAB
Rinse aid
7.
Increase the rinse aid dosage:
•
If the dishes have water marks.
Decrease the rinse aid dosage:
•
If the dishes have a sticky white/blue film.
•
If the dishes are streaked.
•
Build-up of foam. If you have very soft water, the rinse aid can
be diluted 50:50 with water.
When using an all-in-one deter
Care and cleaning
Coarse filter
The coarse filter traps larger food particles, which cannot get past the
drainage pump. Empty the coarse filter as necessary.
Coarse filter
1
Lift the coarse filter by the handle.
2
Empty the coarse filter. Remember to replace it!
Fine filter
Debris that collects on the fine filter is automatically rinsed away during
each wash. Clean the fine filter when necessary.
Fine filter
1
Turn the handle anticlockwise.
2
Lift the filt
Shut off the water.
•
Remove the plug from the wall socket.
•
Call the service department.
Drainage pump stop
NOTE!
Do not forget to replace the drainage pump stop.
Unblocking the inlet hose filter
If the water supply contains small particles, the outer filter on the inlet
hose may become blocked, which results in Water inlet fault.
1
Turn off the machine using the main power switch and unplug it
from the wall socket.
2
Turn off the water tap.
3
Un
Type of fault on the display
Clear the drainage pump. See the chapter Care and cleaning. If the problem persists, call the
service department.
Overfilling water 1
F10
See “Water remains in the dishwasher” in the table “Problem” below. If the problem persists, call
the service department.
Water outlet fault
F11
Check that the water tap is on. Check that the outer filter on the inlet hose is not blocked. See
Unblocking the inle
Check that the dishes are not blocking the spray
arms.
The spray arms do not rotate.
The dishes are not clean.
Clean the spray arms. See the chapter Care and
cleaning.
Spray arm holes or bearings blocked.
Choose a longer programme.
Unsuitable dishwashing programme.
Dose according to water hardness. Far too much
or far too little detergent results in poorer
dishwashing results.
Incorrect detergent dosage.
Avoid large packages.
Clean the coarse and fine filters.
The filters are blocked.
Water remains in the dishwasher.
Check that the filter handle is locked in the stop
position. The handle should point straight out
from the dishwasher.
The filters are not fitted correctly.
Clean the drainage pump. See the chapter Care
and cleaning.
Debris in the drainage pump.
Check that the coloured stop on the right in the
bottom drain is in place. See the chapter