Pelgrim GVW781 Operating Instructions Manual
Text of Pelgrim GVW781 Operating Instructions Manual
Dear Pelgrim customer!
We hope that you will have many years of use from your new machine.
The machine has many features. To make the most of its functions, we recommend
that you read the operating instructions before using the machine. The operating
instructions include information on how you can help protect the environment.
Operating Instructions
Dishwasher
GVW781
BEFORE WASHING FOR THE FIRST TIME
5
LOADING THE DISHWASHER
7
USING THE DISHWASHER
10
SETTINGS
13
CARE AND CLEANING
15
TROUBLESHOOTING
18
INFORMATION FOR TEST INSTITUTE
19
TECHNICAL INFORMATION
20
INSTALLATION
21
SERVICE
22
PROGRAMME CHART
23
YOUR NOTES
FRONT PANEL
The panel is fitted with touch buttons with audible feedback (see the chapter Settings).
1
3
2
5 6
9
10
11
12
7 8
4
1
On/Left-on mode
2
Programme se
• Read the operating instructions and keep them in a safe place!
• Never use the dishwasher for any purpose other than that
specified in these operating instructions.
• Do not load the dishwasher door or dishwasher baskets with
anything other than dishes.
• Never leave the dishwasher door open as someone may trip
on it.
• Use only dishwasher detergent!
• Place knives and other sharp items so that they cannot harm
any
BEFORE WASHING FOR THE FIRST
TIME
PROGRAMME KEY
Some dishwashers include programme keys in different languages.
Attach the programme key in the desired language to the top of
the door.
THE WATER SOFTENER
In order to achieve good dishwashing results, the dishwasher needs
soft water (water with low mineral content). Hard water leaves
a white coating on dishes and the dishwasher.
Water hardness is specified using the following scales: The German
water hardnes
SELECTING THE RINSE AID DOSAGE
Rinse aid dispensing can be set from
(Off) to
(High
dose). (Factory settings:
)
Increase the rinse aid dosage:
• If the dishes have water marks.
Reduce the rinse aid dosage:
• If the dishes have a sticky white/blue film.
• If the dishes are streaked.
• Build-up of foam. If you have very soft water, the rinse aid can
be diluted 50:50 with water.
SETTING THE RINSE AID DOSAGE
The section Settings describes how to set the
Aluminium can lose its shine if washed in a dishwasher. However,
good quality aluminium pans can be washed in a dishwasher, even
if some of the shine will be lost.
Plastic items
Avoid washing plastic items that cannot withstand high
temperatures.
UPPER BASKET
Place glasses, cups, bowls, side plates and saucers in the upper
basket. Wine glasses are placed on the wine glass shelf and knives
are placed in the knife stand on the right (if fitted).
NO
Knives and other pointed items must be placed with the points
down in the cutlery basket or horizontally in other baskets.
Fold-down section for small items
The cutlery basket has a fold-down section in the middle for small
items, or small shafts, such as electric whisk attachments.
a
c
b
Cutlery basket with lid
a
c
b
Positioning of cutlery basket lid (in upper basket)
The cutlery basket lid can be removed and used, for example, as
an extra cutler
Press the Programme selector one or more times until the desired
programme symbol appears on the display.
Auto wash
The dishwasher can measure how dirty the dishes are and adjust
water consumption and temperature accordingly. When newly
installed, the programme needs to be run five times before it is
fully adapted and can provide the best results.
Heavy wash
Programme for very dirty dishes, such as pans, casserole dishes
and oven dishes
When you select Delayed start, the dishwasher will start 1-24
hours after you press the Start/Stop button.
1 Press the button once to activate Delayed start. Press the
button several times – or hold it in – to set the desired number
of hours.
2 Press Start/Stop and the dishwasher counts down 1 hour at a
time and starts after the selected delay.
Press and hold Start/Stop for three seconds if you want to cancel
the Delayed start option.
NOT
DO AS FOLLOWS TO OPEN THE SETTINGS MENU:
First, open the door. Turn off the dishwasher using the On/Left-on mode button (press and hold). Release
the button.
1.
Press and hold the On/Left-on mode button until the display lights up.
2.
Within five seconds, press and hold the Programme selector and the Long dry button.
3.
Release the buttons when the display shows
.
4.
TIP!
Be sure to press right on the symbols, so as not to inadvertently activate a
This sound is used to confirm each button press.
Operation volume
(Off)
(Low)
(High)
Press Start/Stop to save the setting value and continue to the next setting.
For adjusting the contrast of the display on the panel.
LCD contrast
(Low)
(High)
Press Start/Stop to save the setting value and continue to the next setting.
Rinse aid dosage setting.
Rinse aid
(Off)
(Low dosage)
(High dosage)
Press Start/Stop to save the
Press Start/Stop to save the setting value and continue to the next setting.
Adjusting the water softener. Read off the appropriate
setting from the water hardness table below.
°dH
0-5
6-8
9-11
12-14
15-19
20-24
25-29
30-39
40-49
50+
0-9
10-14
15-20
21-25
26-34
35-43
44-52
53-70
71-88
89+
°fH
Water hardness
(Soft water)
(Hard water)
Press Start/Stop to exit the settings menu.
12
CARE AND CLEANING
COARSE FILTER
The coarse filter traps larger food particles, which cannot get past
the drainage pump. Empty the coarse filter as necessary.
1 Lift the coarse filter by the handle.
2 Empty the coarse filter. Remember to replace it!
Coarse filter
FINE FILTER
Debris that collects on the fine filter is automatically rinsed away
during each wash. However, the fine filter and its pipe section
should be cleaned a couple of times a year.
1 Turn t
2 Remove any debris using a needle or the like. The spray arms
also have holes underneath.
UPPER SPRAY ARM
The upper basket must be removed before the upper spray arm
can be released.
1 Pull out the upper basket and turn the basket catch on each
runner outwards (see illustration). The basket can now be
removed.
2 Loosen the upper spray arm in the same manner as the lower
spray arm and clean it.
DOOR
When cleaning the edge around the door, use only a slight
Type of fault
Display
Call the service division.
Overfilling
See "Water remains in the dishwasher" in the table
below.
Water outlet fault
Check that the water tap is on.
Water inlet fault
Turn off the water tap and call the service division.
Inlet valve leakage
Turn off the machine with the On/Left-on mode button and then turn it on again to clear the error message from the display.
Action
Possible causes
Problem
Remove the arms and