Weslo Pursuit 620s Manual 

instructions in this manual before using this equipment. Keep this manual for future reference. Serial Number Decal Model No. WLEVEX11990 Serial No. Write the serial number in the space above for future reference. QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or find that there are missing or damaged parts, we will guarantee you comple ...

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Handlebars Resistance Knob FRONT BACK RIGHT SIDE Seat Pin Seat Seat Post Pedal Side Shield “L” Pin Console Thank you for selecting the new WESLO® PURSUIT 620s exercise cycle. The PURSUIT 620s blends advanced engineering with contemporary styling to provide you with a low-impact workout in the conve- nience and privacy of your own home. For your benefit, read this manual carefully before you use the PURSUIT 620s. If you have addition ...

the position shown. Insert the “L” Pin (54) into the indicated holes in the Scissor Frame and the Frame and secure it with a Spring Clip (55) (see the inset drawing). Hold one of the Stabilisers (2) against the saddle on the Frame (1), with the square holes facing away from the saddle. Attach the Stabiliser with two Carriage Bolts (5) and two M8 Locknuts (39). 1 5 1 2 Square Hole ...

Handlebars (6). Attach the Handlebars to the Scissor Frame (3) with four M6 Button Head Bolts (19) and four M6 Locknuts (52). Next, slide the Handlebar Collars over the Button Head Bolts. 5. The Console (48) requires two 1,5V batteries (not included). Alkaline batteries are recommended. Refer to the inset drawing. Remove the battery door from the Console. Press two batteries into the bat- tery compartment. ...

HOW TO ADJUST THE SEAT For effective exercise, the Seat (21) should be at the proper height. As you pedal, there should be a slight bend in your knees when the pedals are in the lowest position. To adjust the Seat, first hold the Seat and remove the Seat Pin (16). Align one of the holes in the Seat Post (20) with the hole in the Frame (1). Insert the Seat Pin into the Frame and the Seat Post. Secure the Seat Pin with a Sprin ...

these modes for continuous display, press the mode but- ton repeatedly. The mode indi- cators will show which mode is selected. Make sure that the scan mode is not selected. 3. To reset the display, press the on/reset button. 4. To turn off the power, simply wait for about four min- utes. Note: The monitor has an “auto-off” fea- ture. If the pedals are not moved and the moni- tor buttons are n ...

(22) until the Magnet (4) is aligned with the Reed Switch. Loosen but do not remove the M4 x 16mm Screw (46). Slide the Reed Switch slightly closer to or away from the Magnet. Retighten the Screw. Turn the Crank for a moment. Repeat until the console dis- plays correct feedback. When the Reed Switch is cor- rectly adjusted, re-attach the left side shield and pedal. HOW TO ADJUST THE RESISTANCE STRAP If th ...

exercise program. Remember that proper nutrition and adequate rest are essential for successful results. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with the proper intensity. The proper intensity level can be found by using your heart rate as a guide. The chart below show ...

R0899A Note: “#” refers to a non-illustrated part. Specifications are subject to change without notice. See the back cover of this manual for information about ordering replacement parts. Key No. Qty. Description Key No. Qty. Description 1 1 Frame 2 2 Stabiliser 3 1 Scissor Frame 4 1 Magnet 5 4 Carriage Bolt 6 1 Handlebar 7 1 1/2-13 UNC Nylon Locknut 8 1 Left Pedal 9 1 Right Pedal 10 1 Left Side Shield 11 1 Right Si ...

R0899A ...

Printed in China © 1999 ICON Health & Fitness, Inc. HOW TO ORDER REPLACEMENT PARTS If you encounter any difficulties with this product, or if you need to order replacement parts, contact the ICON Fitness Lifestyle Ltd. office, or write: ICON Fitness Lifestyle Ltd. Greenwich House 223 North Street Sheepscar West Yorkshire Leeds LS7 2AA Tel: Country Code: 0345-089009 Fax: 0113-2411120 To help us assist you, please provide the followin ...