Western Digital WD3000GLFS Quick Install Manual

aid in the quick installation of your new SATA hard drive. If you experience problems following these procedures or need further information regarding the installation and use of your drive, visit our website at support.wdc.com to search our online knowledge base for frequentl ...

1. Slide the hard drive into an available 3.5-inch drive bay and secure the drive with the four mounting screws (two on each side). For proper grounding, install the screws in the hole positions (Figure 1). 2. Attach one end of the SATA cable to the SATA interface on the WD drive (Figure 2). SATA connectors are keyed to ensure prop ...

another new partition to the hard drive. 7. Enter the capacity of the partition and click Apply. 8. Repeat steps 6 and 7 until the desired amount of partitions is obtained, then click Next to continue installing Windows Vista on the first partition. Adding a Second Drive: 1. Start Windows Vista ...

This device has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This unit generates, uses, and can radiate radio frequency e ...