ViewSonic PJ501 - 3 Panel LCD Video Projector Operation & User’s Manual

Features ..................................................................................................... 2 Product Features .................................................................................................2 Before Use ...................................................................... ...

Indicator Messages ............................................................................................21 Symptom .......................................................................................................... ...

Apple, Mac and ADB registered trademarks of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo and OnView are registered trademarks of ViewSonic Corporation. VESA and SVGA are registered trademarks of the Video Electronics ...

high resolution computer images • Short focal length • Whisper-mode • Digital keystone correction • Component video maximizes video image quality Before Use Package Contents Make sure all of the following items are included in the package. If anything is missing, please contact ViewSonic. NOTE: Keep the original packing mate ...

Figure 2: Projector Components Slot for Kensington Lock Power switch AC power Intake ventilation Control panel Reset Keystone Input Standby/ON Front foot adjuster Air intake (for the cooling fan) Speaker Rear foot adjuster Remote control sensor Component Video Y (In) CB/PB (In) CR/PR (In) S-Video (In) Zoom knob Focus ring Remote control sensor Lens (with lens cap) Lamp indicator Tem ...

Remote Control Components Diagram Figure 3: Remote Control Components STANDBY/ON Button AUTO Button BLANK Button VOLUME Button MUTE Button KEYSTONE Button MENU Button [Up] Arrow Button [Right] Arrow Button RESET Button Search Button RGB Button VIDEO Button ASPECT Button MAGNIFY ON Button OFF Button FREEZE Button POSITION Button [Left] Arrow Button ENTER Button [Down] Arrow Button ESC (Escape) But ...

1 Remove the battery cover by pulling then lifting the knob on the cover. 2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3 Reattach the battery cover. NOTE: Replace the batteries if the operation of the remote control becomes irregular or weak. Figure 4: Battery CAUTION • Only use the specified AA batteries. • Do not mix new and old batteries. This may r ...

The projection distances shown in the table below are for full size (1024 x 768 pixels). a Distance from the projector to the screen (+10%). b Distance from the lens center to the bottom of the screen (+10%). Figure 5: Screen Views Angle Adjustment Use the foot adjusters on the bottom of the projector to adjust the proje ...

NOTE: • Before connecting, read the instruction manuals of the devices to be connected, and make sure that the projector is compatible with the device(s). • Securely tighten the screws on the connectors. • For some RGB input modes, the optional Mac adapter is necessary. • Some computers may have multiple display screen modes. You may ...

Plug & Play This projector is VESA DDC 1/2B compatible. Plug& Play is possible by connecting to a computer that is VESA DDC (Display Data Channel) compatible. Please use this function by connecting the accessory RGB cable to RGB (In) of the projector; other connection methods may not work. NOTE: Plug & Play is a system configured with peripheral equipment including a computer, display and operating system. T ...

1 Make sure the power cord is connected correctly and lens cap has been removed. Set the Power Switch to [I] ON. The unit is now in Standby mode and the POWER indicator LED turns a steady orange. 2 Press the STANDBY/ON button on the control panel or the remote control. Warm-up begins and the power indicator blinks in green. 3 After several seconds the lam ...

marked with (*) may be accessed from the projector control panel. Table 3: Basic Operation Item Description INPUT SELECT (projector control panel) Select Input Signal (*) : press the INPUT Button. RGB J VIDEO J S-VIDEO J COMPONENT (JRGB) Select RGB Input: Press the RGB button. VIDEO/S-VIDEO/COMPONENT J RGB Select Video ...

POSITION), Vertical Position, (V. POSITION), Clock Phase (H. PHASE), and Horizontal Size (H. SIZE), are automatically adjusted. • Before using the AUTO feature, be sure to maximize the window of the application displayed on-screen. Automatic Adjustment (for Video Input): Press the AUTO button. A signal type appropriate fo ...

menus: MAIN, PICTURE-1, PICTURE-2, INPUT, SCREEN and OPTION. To select a menu use the / buttons, then press the button or the ENTER button to select a menu item. The MAIN Menu has seven (7) items as shown in the Table 4. Please select the item you want to operate with the / buttons and press the button or the ENTER button to ...

Press the / button to select one of these langauge options: • ENGLISH • FRANÇAIS • DEUTSCH • ESPAÑOL • ITALIANO • NORSK • NEDERLANDS • [JAPANESE] • POTUGUÊS • [TRADITIONAL CHINESE] • [KOREAN] The PICTURE-1 menu has 5 items as shown in Table 5. Select the item you want to adjust with the / buttons and press the button or the ENTER button. Table 5: PICTURE-1Me ...

Please select the item you want to operate with the / buttons and press the button or the ENTER button to start operating. Then you can operate according to the following table. Table 6: PICTURE-2 Menu Item Actions/Description V POSITION Adjust Vertical Position (for RGB): Up Down H POSITION Adjust Horizontal Position (for RGB): Left Right H PHASE A ...

Select the item you want to adjust with the / buttons and press the button or the ENTER button. Remember, the starting of the item AUTO performs its function at the same time. Table 7: INPUT Menu Item Actions/Description AUTO Auto Adjust (for RGB): It adjusts automatically the H POSITION, V POSITION, H PHASE and H SIZE. Use this function with the maximum size window of t ...

Please select the item you want to operate with the / buttons and press the button or the ENTER button to start operating. Then you can operate according to the following table. Table 8: SCREEN Menu Item Actions/Description BLANK Select Mode of Blank Screen: Press the / button to select one of these options: • Blue blank screen • White blank screen • Black blank ...

Please select the item you want to operate with the / buttons and press the button or the ENTER button to start operating. Then you can operate according to the following table. Table 9: OPTION Menu Item Actions/Description VOLUME Adjust Volume: Loud Quiet AUTO OFF Adjust AUTO OFF Time: • Long (MAX. 99 min.) • Short (Min. 1 min.) • (DISABLE: 0 min.) Th ...