Wheelock E-7025 Specification
Read Online
Read the Wheelock E-7025 Specification online using the built-in PDF viewer.
E-7025 Specification: Key Pages of Document
SPEAKERS & SPEAKER STROBES Wheelock’s Series E Speakers and Speaker Strobes are designed to meet the critical needs of the life safety industry for effective emergency voice communications and tone signaling. Series E speakers provide high audio output with clear audibility at minimum wattage. They offer system designers the high quality, high performance and low installed cost required for fire protection systems. All models flush mount to electrical backboxes and are equipped with a blocking capacitor for DC supervision of audio lines and IN/OUT wiring terminals for fast installation using #12 to #18 AWG wiring. Series E Spea ...
WARNING: PLEASE READ THESE SPECIFICATIONS AND INSTRUCTIOS CAREFULLY BEFORE USING THIS PRODUCT. FAILURE TO COMPLY WITH ANY OF THE FOLLOIWNG INSTRUCTIONS, CAUTIONS ...
INDEPENDENTLY (NON-SYNC OR SYNC) TO NEXT APPLIANCE OR EOLR FROM PRECEDING APPLIANCE OR VOICE EVACUATION PANEL TO NEXT STROBE OR EOLR FROM PRECEDING STROBE, SYNC MODULE, POWER SUPPLY OR FACP SPEAKER STROBE + - + + - - - + + + - - Application Notes: CAUTION: Check that the installed product will have sufficient clearance and wiring room prior to installing backboxes and conduit, especially if sheathed multiconductor cable or 3/4” conduit fittings are used. 1. Mounting hardware for each mounting option is supplied. 2. Conduit entrances to the backbox should be selected to provide sufficient wiring clea ...
The speaker appliance shall be a Wheelock Series E low profile speaker and speaker strobe appliance or equivalent. The speaker and strobes shall be ULC Listed under CAN/ULC-S541-99 and CAN/ULC-S526-02 for Fire Protective Service. All speakers shall be either 25 or 70 VRMS inputs with field selectable power taps from 1/8 to 2 watts with Listed sound output up to 90 dBA at 10 feet, and a listed frequency response of 400 to 4000 Hz. Strobes shall use filtered power or unfiltered power supply (full-wave-rectified). All models shall have provisions for standard reverse polarity type supervision and IN/OUT field wir ...
Speakers PDF Instructions
Product usage manual for the Aiphone IER-2 Speakers. The guide explains setup and device calibration, calibration steps, operating instructions, hardware setup.
treVolo Bluetooth® Speaker User Manual Setup instructions for the BenQ treVolo Speakers. This manual covers performance details, maintenance, maintenance guidelines, technical assistance.
OPERATION 36953002A GENERAL: Power Source (AC) ............. Input: 100-240V AC, 50/60Hz, ........................................ 1.2 A max, Output: 19 V DC, 2A Dimensions ........................... 6 (W) x 6 (H) x 6 (D) inches .............................. Advanced user guide for the TDK A360 Speakers. It provides technical information on wiring diagrams, application scenarios, warranty information.
S408 TWO-WAY LOUDSPEAKER USER’S MANUAL Instruction and usage manual for the Mackie S408 Speakers. This manual offers stepwise instructions for testing procedures, operation, installation steps.