Vitek VT-H41 Manual 

Text of Vitek VT-H41 Manual 

4 Channel Digital Video Recorder

with H.264 Compression • 4 Video Inputs with 1 BNC & 1 VGA Outputs • H.264 Compression • Supports both Dynamic and Static IP Addresses • Up to 120 IPS Recording / Live Display • Remote Viewing over the Internet or LAN • Supports one internal SATA Hard Drive • 250GB to 1TB Internal Storage Options • Quadplex operation enabling simultaneous recording, playback, networking, and backup • 4 Alar

EXPLANATION OF SYMBOLS

WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. CAUTION Changes or modifications not expressly approved by the manufacturer may void the user’s authority to operate this equipment. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. WARNING  Do not use

 Do not place a container holding water or other liquids above the unit when it is

connected to power.  Do not allow the unit to get wet.  Do not use during thunder/thunder storms unless used with an uninterruptable power supply (UPS).  Do not place in an unstable position.  Do not expose to shock or vibration.  Do not use this unit in areas where it is exposed to the possibility of explosion. CAUTION  Do not pull on the power

H.264 Video compression

 QUADPLEX operation enabling simultaneous recording, playback, networking, and backup.  Instant and convenient data backup & firmware upgrade using USB flash drive Simple User Interface  Individual channel setting and operation  Motion detection record  Free Dynamic DNS  

System components and Installation

Requirements for installation and safety This chapter is for the requirements for safe installation and use. This kit should be installed on a flat table or in a rack. The location in which the DVR is installed in the room is very important for proper operation of the system. When the DVR is installed too closely together or the location is poorly ventilated, the DVR may not operate properly and maintenan

The package contains the main unit and its components as specified below. When you

purchase the package, please check to ensure the components specified below are included. DVR Remote Controller Battery1.5V (AAA x 2EA) Adaptor and Power cable Client Software CD  User Guide           

Channel, Input Level

4CH, Composite 8CH, Composite 16CH, Composite Signal Format NTSC/PAL Video Loss Check Yes Output Main Monitor Output 1 CH BNC, 1CH VGA: Selectable Signal Format NTSC/PAL & VGA Audio Input & Output 4 CH Line input & 1 CH Line output Audio Codec G.711(ADPCM) Alarm Sensor Input ((NC/NO Selectable) 4 4 4 Alarm Output 1 Alarm out by Alarm, Motion, Video Lo

Yes (Free DDNS)

Network Interface 10/100 base-TX Ethernet (RJ-45) Network Access Client Software (1:1) Live, Search, Backup, PTZF Camera Control Web viewer (1:1) Live, Search, Backup, PTZF Camera Control Multi-sites Monitoring System (1:n) Live, Search, Backup, PTZF Camera Control Features DLS (Day Light Saving) Yes Internal Beep By Alarm, Motion, Video Loss, HDD error Multi-Language Yes S/W Upgrade USB Fl

1. NAME & FUNCTION................................................................................................... 10

1-1. Front panel.............................................................................................................................................10 1-2. Remote controller .................................................................................................................................11 1-3.

Vitek Storage Owners Instructions: