Whirlpool 3Ell8GK Use And Care Manual

ce cube Stationary , door shelves /Utility bin Utility ecompartment Butter R compartment Adjustable Ashelves > Stationary door shelves NO-FROST REFRIGERATOR-FREEZER 3Ell8GK ...

.... Using Your Refrigerator. ........... Setting the controls. ................ Exterior moisture control ............ Adjusting the refrigerator shelves. .... Removing the freezer shelf .......... Moving the meat drawer and cover ... Removing the crispers. ............. Removi ...

To reduce the risk of fire, electrical shock, or injury when using Your refrigerator, follow basic precautions including the following: l Read all instructions before using the refrigerator. l Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous...even if they wi ...

Sprang grounding type wall receptacle Sprang grounding plug Refrigerato power cord Use screwdriver to adjust Leveling screw I Clean It Clean your refrigerator before using it. See cleaning instructions on page 10. Plug it in Recommended Grounding Method A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused and properly grounded ele ...

Setting the controls Controls for the refrigerator and freezer are in the refrigerator. When the refrigerator is plugged in for the first time: I. Set the Refrigerator Control to 3. 2. Set the Freezer Control to B Give the refrigerator time to cool down completely before adding food. (This may take several hours.) These settings sh ...

Continued EXTERIOR MOISTURE CONTROL 4 OFF l ON b Glass shelves are heavy. Be careful. Pull out to the stop, lift the front and pull again. Exterior Moisture Control The Exterior Moisture Control on the Control Console operates electric heaters around the door openings. These heaters help keep moisture from forming on the outside of ...

lift the front nd pull again. To remove the crispers: 1. Slide crisper straight out to the stop, lift front, then slide out the rest of the way. 2. Replace in reverse order, Remove the glass insert, llfl the frame front, then the back. Removing the crisper cover To remove crisper cover: 1. Push up glass insert from ...

Continued Changing the light bulbs To change refrigerator light: 1. Disconnect refrigerator from power supply. 2. Reach behind the Control Console to find bulb(s). 3. Remove bulb. 4. Replace with a 40-watt appliance bulb. !j. Reconnect power supply. NOTE: Not all commercial appliance bulbs will fit your refrigerator. Be sure to replac ...

working. You’ll hear ice falling into the bin. Don’t let these sounds bother you. . The ice maker will not operate until the freezer is cold enough to make ice. This can take overnight. . Because of new plumbing connections, the first ice may be discolored or off-flavored. Discard the first few batches of i ...

Both the refrigerator and freezer sections defrost To clean your refrigerator, turn the Refrigerator automatically. But both should be cleaned about Control to OFF, unplug it, take out all removable once a month to help prevent odors from building parts and clean it according to the following up. Spills should be wiped up right ...