Elements esca Operation & User’s Manual
Text of the manual
esca User’s Manual v1.2
CONTACTS
Elements s.r.l.
via Montalti, 42
47521 Cesena
ITALY
email: [email protected]
web: www.elements-ic.com
esca User’s Manual v1.2
CONTENTS
INTRODUCTION ................................................................................................................ 4
Introduction to ESCA .................................................................................................................................. 4
HARDWARE SETUP ............................
esca User’s Manual v1.2
INTRODUCTION
INTRODUCTION TO ESCA
ESCA (Elements Single Channel Amplifier) is a current measurement system entirely
contained in a USB stick designed for voltage clamp experiments.
Thanks to a custom-made microchip for low-noise current signal acquisitions, ESCA
achieves high performances in a very small size package.
The main feat
esca User’s Manual v1.2
FRONT CONNECTIONS
On the front of ESCA there is the connection for your Device Under Test (DUT).
This connector is a coaxial SMB male gold plated connector where the center contact is
the current measurement input and the outer contact is the reference voltage.
IMPORTANT: Do NOT short the reference to the ground.
REAR CONNECTIONS
On
esca User’s Manual v1.2
To obtain the best noise performances a particular care must be given to the shielding
with a metallic cage (Faraday cage) all around the experimental setup. In particular, it
is important to connect the Faraday cage to the ground connector placed on the rear of
ESCA.
In order to minimize the noise it is also important to minimize p
esca User’s Manual v1.2
be saved to be compatible with standard commercial software such as pClamp® from
Molecular Devices®.
IMPORTANT: The software must be installed BEFORE connecting the ESCA device
to the PC.
REQUIREMENTS
The minimum system requirements are:
Dual core processor 1GHz or better
1GB of RAM
A free USB 2.0 port
Windows XP /
esca User’s Manual v1.2
Click on Extract to prepare the installation of these drivers.
Then, start the FTDI installation by clicking on Next button and wait until installation
finishes.