VTech CS6428-2 Operation & User’s Manual

Introduction To protect our environment and conserve natural resources, this Abridged user’s manual provides you with basic installation and use instructions. A limited set of features are described in abbreviated form. Please refer to the online User� ...

Install the telephone base and charger as shown below. Telephone line cord Telephone base Charger Telephone base power adapter A DSL filter (not included) is required if you have DSL high-speed Internet service Electrical outlet not controlled by a wall switch Electrical outlet not controlled by a wall switch Telepho ...

The telephone comes ready for tabletop use. Follow the steps below to mount your telephone on a wall. Route the telephone line cord through the hole on the wall mount bracket and plug it into the telephone wall jack. Route the power cord out of the telephone base and plug it into an electrical outlet not controlled by a ...

Press MENU when the phone is not in use. Press or until the screen displays the desired feature menu. Press SELECT to enter that menu. To return to the previous menu, press CANCEL. To return to idle mode, press and hold CANCEL. Telephone settings Default settings are indicated by asterisks (*). Screen display Function Options LCD L ...

You can adjust the ringer volume level, or turn the ringer off. Press MENU when the handset is not in use. Scroll to >RINGERS then press SELECT twice. Press or to adjust the volume, then press SELECT to save. If the handset ringer volume is set to off, that handset is silenced for all incoming calls except paging tone. The ringer ...

To start paging: Press /FIND HANDSET on the telephone base once and then release. All idle handsets ring and their screens show ** PAGING **. To end paging: Press /FIND HANDSET again on the telephone base once and then release. Press , or any dialing key on the handset. Place the handset in the te ...

To add a directory entry: Press MENU/SELECT twice. Scroll to >ADD CONTACT then press SELECT. Use the dialing keys to enter the number (up to 30 digits). -OR- Copy a number from the redial list by pressing REDIAL and then press , or REDIAL repeatedly to select a number ...

When the desired call log entry displays, press SELECT. Use the dialing keys to modify the number, then press SELECT. Use the dialing keys to modify the name, then press SELECT to save. To delete one call log entry: When the desired call log entry displays, press DELETE. To delete all call log entries: Press MENU ...

If the answering system and call screening are on, the announcement and the incoming message broadcast at the telephone base when a call is answered by the answering system. Options while recording a message: Press VOL or VOL on the telephone base to adjust the call screening volume. Press /PLAY/STOP to temporarily tu ...

customer service, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. My telephone does not work at all. Make sure the battery is installed and charged correctly. For optimum daily ...