Wintal PVR10 Operation & User’s Manual

Text of the manual

WINTAL PVR10HD USER MANUAL

Safety InstructionS Read following items carefully before operating this receiver. Installation ▪▪This receiver should be installed horizontally. Unbalanced installation may cause damage. ▪▪Install the receiver in a place with: ▪▪good ventilation (leave space not less than 10cm around this receiver) ▪▪no heat sour

Symbols on the Receiver

Part 1: Warning Mark SHOCK HAZARD: DO NOT OPEN RISQUE DE CHOC: NE PAS ENLEVER This mark appears on rear panel of this receiver, painted prominently in contrasting colour to background. It consists of two graphical symbols and warning messages. The detailed specifications are as follows: Warning: To reduce the risk of electric shock,

WINTAL PVR10HD USER MANUAL

Contents 1. Before Using YOUR PVR10HD 6 1.1 In the Box 6 1.2 Main Feature 6 1.3 Front Panel 6 1.4 Rear Panel 7 1.5 Remote Control 7 1.5.2 Remote CONTROL - General KEYS 8 1.5.3 REMOTE CONTROL - PVR KEYS 9 1.5.4 Remote Control - LeArning Keys 10 2. Installation 11 2.1 CONNECTING TO YOUR TV 11 2.1.1 TV CONNECTION - HDMI

4.5.3 Delete Schedule

25 4.6 Operation while recording 26 4.6.1 View/ Modify Recording Information 26 4.6.2 Switching channels while recording 27 4.6.3 Playback Current Program 27 4.7 Playback Pre-Recorded Files 27 4.7.1 Pause 27 4.7.2 Rewind/ Fast Forward 27 4.7.3 SLOW FORWARD 28 4.7.4 Playback Progress Bar 28 4.7.5 SKIP BACK/ SKIP FORWARD 28 4

WINTAL PVR10HD USER MANUAL

1. Before Using YOUR PVR10HD 1.1 In the Box Once you have unpacked your PVR10HD, please ensure that the following has been included: 1. RF Cross over lead Switch between operation and standby modes 2. Composite AV lead Receive infrared remote control signal 3. 12V DC power supply Display status 4. Remote control Open the cover to

1.4 Rear Panel

1 3 6 7 11 2 4 8 9 13 14 15 16 17 18 23 24 10 12 19 20 21 22 5 Label Function 1. ANT IN 1 Connect to your terrestrial antenna 2. LOOP OUT 1 Loop out RF signal to ANT IN 2 using the included cross over RF lead 3. ANT IN 2 Input RF signal from LOOP OUT 1 using the included cross over RF lead 4. LOOP OUT 2 Loop out RF signal to another receiver

WINTAL PVR10HD USER MANUAL

1.5.2 Remote CONTROL - General KEYS Button Label Function PVR POWER Switches the PVR10HD between on and stand-by MUTE Mute/ Unmute audio AUDIO Displays the AUDIO SELECT window 0 - 9 Switch channels or input numbers TEXT/ P+ Display Teletext Information/ Page Up CC/ P- Turn Closed Captions On or Off/ Page Down RECALL Back to previ

1.5.3 REMOTE CONTROL - PVR KEYS

Please note: Some keys may behave differently based on current operation and/ or what is displayed on the screen. If required, please refer to the instructions on-screen to determine what key needs to be pressed to complete an operation. Button Label Function HDD LIST Displays the recorded file list FIRST Skip backwards duri

WINTAL PVR10HD USER MANUAL

1.5.4 Remote Control - LeArning Keys The PVR10HD’s remote control has learning keys located on the top left corner. These keys (except for the SET key) can be used to memorize corresponding keys from an existing remote, such as your TV or AV receiver. With this feature you could easily turn your TV on and off, and adjust the v

Other DVR Manuals