eMachines E180HV Operation & User’s Manual

Unpacking the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Setting up the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

• Setting up the monitor • Turning on the monitor • Adjusting monitor settings • Power management • Maintaining • Troubleshooting Using Your eMachines Flat-Panel Monitor ...

2 Unpacking the monitor Your monitor box should contain the following items: • Monitor (with neck attached) • Base (to connect to the neck) • This User Guide • VGA cable • Power cord If you are missing any items, call Customer Care. Setting up the monitor To set up the monitor, first attach the base, then con ...

1 Position your computer and the monitor so you can reach the back of each, then connect the blue VGA video cable to the blue VGA video connector under the back of the monitor. Make sure that your computer is turned off, then connect the other end of the video cable to the matching vide ...

4 Connecting a security cable You can secure your monitor to your computer desk (or to another heavy object) with a cable lock (such as a Kensington™ lock). To connect a cable lock, follow the cable lock’s instructions to connect it to the lock slot on the back of your monitor (cable lock not included). Turning on ...

After your computer is running, the power LED on the monitor’s power button should be green. Allow several seconds for the display image to appear. If the power LED is not on or is flashing, or you do not see a display image, check the connections. For more troubleshooting information, see “Troubleshooting” ...

6 On-screen display options Adjusting OSD settings To adjust the OSD settings: 1 Press Auto. The display image is automatically adjusted to the ideal settings for your current screen resolution. 2 Press Menu. The OSD opens. 3 Press < and > to highlight a setting, then press Menu to open the selected menu or setting. Yo ...