Emerson CMF200A Installation Manual

Text of the manual

P/N 20002158, Rev. C

September 2007

©2007, Micro Motion, Inc. All rights reserved. ELITE and ProLink are registered trademarks, and MVD and MVD Direct Connect

are trademarks of Micro Motion, Inc., Boulder, Colorado. Micro Motion is a registered trade name of Micro Motion, Inc., Boulder, Colorado. The Micro Motion and Emerson logos are trademarks and service marks of Emerson Electric Co. All o

Before You Begin

Before You Begin This manual describes how to install a Micro Motion® ELITE® sensor. The following information is provided in this manual: Customer service For technical assistance, phone the Micro Motion Customer Service department: • In the U.S.A., phone 800-522-MASS (800-522-6277) (toll free) • In Canada and La

Micro Motion® ELITE® Sensors

Before You Begin Specifications Full product specifications can be found in the product data sheet, which is available from the Micro Motion web site at www.micromotion.com. Definitions The term MVD™ transmitter refers to the following transmitter models: • Models 1500, 1700, 2400S, 2500, and 2700 • Models 3500 and 3700

Before You Begin

Figure 1 ELITE sensor with Model 2400S transmitter or enhanced core processor Flow direction arrow Purge fittings or rupture disks (optional) Calibration tag Thru holes for alternative mounting Process connection CMF010 Approval tag Model 2400S transmitter or enhanced core processor Model 2400S transmitter or enhanced c

Micro Motion® ELITE® Sensors

Before You Begin Figure 2 ELITE sensor with core processor Flow direction arrow Purge fittings or rupture disks (optional) Calibration tag Core processor housing Thru holes for alternative mounting Process connection CMF010 CMF025, CMF050, or CMF100 Purge connections (optional) CMF200, CMF300, CMF400, or CMFHC3 Calibration ta

Before You Begin

Figure 3 ELITE sensor with junction box Flow direction arrow Purge connections or rupture disks (optional) Calibration tag Junction box Approval tag Thru holes for alternative mounting Process connection Junction box Approval tag CMF025, CMF050, or CMF100 Flow direction arrow Process connection Purge connections (option

Micro Motion® ELITE® Sensors

Determining a Location Figure 4 High-temperature or extreme high-temperature ELITE sensor Step 1 Determining a Location Choose a location for the sensor based on the requirements described in this section. The following general guidelines can help you select an appropriate location for the sensor. Full flow tubes For optimal

Other Stud Sensor Manuals