Engl E401 Operating Manual
Text of Engl E401 Operating Manual
Straight: 2-channel all-tube guitar amplifier.
Models:
E401: Combo 50 Watts; E402: Head 50 Watts;
E403: Combo 50 Watts special (3 channels), E404: Head 50 Watts special (3 channels);
E501: Combo 100 Watt; E502: Head 100 Watts;
E503: Combo 100 Watts special (3 channels), E504: Head100 Watts special (3 channels);
Features:
Two basic channels Clean and Lead, 3-Band-EQ in e
Fuse: External mains fuse. For values refer to "technical data".
NOTE: The value must correspond to the available current.
CAUTION: Ensure replacement fuses bear identical ratings (refer to the table below)!
(Ground:) Only used at balanced mains without Earth to avoid hum.
Usually
Engl E401 Protect the amp from mechanical knocks (tubes!).
Let the amp cool down before you transport it (approx. 10 minutes).
Tubes need about 20 seconds to warm up after you switch the power on,
and furtheron a few minutes before they reach their full power capability.
Avoid storing the amp in damp or dusty rooms, they are hard on jacks,
switches and potentiometers.
Make sure air can circulate at the rear side and the top of the amp
to allow for adequate cooling (