Envision EN-5200e Operation & User’s Manual
Text of Envision EN-5200e Operation & User’s Manual
15 inch TFT LCD Monitor
User’s
Manual
by Envision Peripherals, Inc.
www.ENVISIONmonitor.com
Before operating your monitor, please read this
manual thoroughly.
For Your Safety
FCC Statement
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy, and if not
installed and used in accordance with the
instructions, may cause h
For Your Safety
Precautions
•
Do not use the monitor near water, e.g. near a
bathtub, washbowl, kitchen sink, laundry tub,
swimming pool or in a wet basement.
•
Do not place the monitor on an unstable cart,
stand, or table. If the monitor falls, it can injure a
person and cause serious damage to the
appliance. Use only a cart or stand
recommended by the manufacturer or sold with
the monitor. If you mount the monitor on a wall
For Your Safety
Special Notes on LCD Monitors
The following symptoms are normal with an LCD
monitor and do not indicate a problem:
•
Due to the nature of the fluorescent light, the
screen may flicker during initial use. Turn off the
Power Switch and then turn it on again to make
sure the flicker disappears.
•
You may find slightly uneven brightness on the
screen depending on the desktop pattern you
use.
•
The LCD screen has
Before You Operate the Monitor
Installing & Removing the Base
General Features:
•
38.1cm(15") TFT Color LCD Monitor
•
Crisp, Clear Display for Windows
•
Supports Resolutions up to 1024 X 768 pixels
@75Hz, (1024 x 768 @ 60Hz Recommended)
•
EPA ENERGY STAR®
•
Ergonomic Design
•
Space Saving, Compact Case Design
Package Contents
The box that your monitor was shipped in should
have included the following items:
1. EN-520
Before You Operate the Monitor
Connecting the Wires Using the Power Cord Supplied
1. Connect the built-in video cable into the 15-pin
connector on the back of your computer and
tighten the two screws.
2. Connect the power cord into your LCD monitor's
Power Adapter.
3. Connect the Power Adapter to your monitor.
4. Plug the other end of the power cord into a
grounded AC outlet or UL-approved power strip.
Caution: Make sure the powe