Epson PowerLite ELPMBUNI Installation Manual

Table of Contents Warranty ............................................................................................................................................................................................... - 3 - Contact Premier Mounts ....................................................................................................................................................................... - 3 - Warning Statements.................................................................................................................. ...

Securing the Bracket to the Projector NOTE: The two-piece mounting legs are designed to allow routing of the legs around critical ventilation screens on the base of the projector as shown. You may also reduce the two-piece leg to a one-piece leg as shown for a better overall fit to the projector. 1. Locate the mounting points on the bottom of the projector and use the appropriate number of mounting legs. 2. Select the mounting hardware that your projector requires and loosely install the universal mount to your projector. NOTE: If your projector requires ...

Installation Manual ELPMBUNI Universal Mount Assembly A Single Wooden Stud Mounting Points B Solid Structure Mounting Points C Ceiling Plate D Allen Wrench E Height Adjustment Screws F Tension Knobs G Safety Knob H Security Screws I Leveling Barrels J Universal Mounting Bracket K Leg Assembly L Projector (Not Supplied) M Tri-Lock Opening Option 1 Option 2 Combination Leg Single Leg NOTE: See the best configuration for your projector for filter and lamp access. NOTE: The four (2-piece) leg assemblies can be used as single leg or any combination of single and dual legs togeth ...

Installation Manual Low-Profile Installation 1. If your installation requires the overall height of the mount to be less that the approximate 9” shown with the standard mount assembly, you can convert the height to only 2 ½” by simply removing the adjustment channel as shown. 2. Once the extension channel is removed, attach the upper ceiling plate to the ceiling. 3. Once attached install the bell housing assembly to the upper ceiling plate as shown (Figure 10, Figure 11, and Figure 12). Figure 10 Ceiling Plate Remove the M8 x 16mm Screws, flat Washers and Star Washers ...