Samsung CLP-510 - Color Laser Printer Setup Manual

Step 2. Understanding Your Printer ................... 5 Step 3. Installing the Transfer Belt and Toner Cartridges 7 Step 4. Loading Paper ..................................... 14 Step 5. Connecting a Printer Cable .................. 17 For Local Printing .......... ...

1 Remove the printer and all of the accessories from the packing carton. Make sure that the printer has been packed with the following items: NOTES: • If any items are missing or damaged, notify your dealer immediately. • Components may differ from one country to another. • The CD-ROM contains the printer driver, ...

3 Pull the paper tray out of the printer and remove the packing tape from the tray. 4 Select a location for the printer: •Leave enough room to open the printer trays, covers, and to allow for proper ventilation. •Provide the proper environment: – A firm, level surface – Away f ...

These are the main components of your printer: NOTE: The surface of the output tray may become hot if you print a large number of pages at once. Please make sure that you don’t touch the surface, and prevent children from approaching it. Top Cover (Open to install the transfer belt.) Output Support C ...

(Open to remove jams from the optional tray 2.) Muti-purpose Tray (Open to load special print materials.) Right Cover (Open to remove paper jams.) Power Switch USB Port Power Receptacle Control Board Cover (Open to install optional accessories.) Wireless Network Antenna* Network Port** * A wireless network card is not ...

Cartridges 1 Using the handle, completely open the left cover until it is at right angles to the main frame. CAUTION: If the left cover is not completely open, the top cover release button will remain locked. 2 Press the top cover release button to unlatch the top cover and open it all the ...

NOTE: The image unit is already installed in your printer. 4 Remove the protective devices on both side of the transfer belt. ...

side. CAUTION: To prevent damage, do not expose the imaging unit to light for more than a few minutes. Close the top and left covers should the insallation need to be halted for any reason. 6 Holding the handle on the transfer belt, align it with the slots on either side o ...

firmly into place. 8 Firmly push the lock levers on each side toward the top cover, as shown below, to lock the transfer belt into place. CAUTION: If you leave the left cover open for more than a few minutes, the imaging unit can be exposed to light. This causes damage to the imaging ...