Epson 50 - Artisan 50 - Printer Start Here Manual
Text of Epson 50 - Artisan 50 - Printer Start Here Manual
Caution: Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
If anything is missing, contact Epson
® as described on the back of this sheet.
Remove all protective materials.
Unpack
1
Start Here
Please read these instructions before using the printer.
1
Conne
Note: Don’t load paper before installing the ink cartridges.
1 Lift up the printer cover, then open the cartridge cover.
2
Unpack the ink cartridges.
3
Remove only the yellow tape from each cartridge.
Caution: Don’t remove any other seals from the cartridges.
4
Insert the cartridges in the holder for each color. Press the cartridges
down until they c
ink button to charge ink. Charging takes about 3 minutes.
Caution: Don’t turn off the printer while the
power light is flashing or you’ll
waste ink.
1
Open the paper support, then pull up the extension.
2
Open the front cover and pull out the tray extensions.
3
Slide the edge guide to the left.
Load paper against the right edge guide and behind the tab, with the
printable side face up.
Note: Don’t load the paper sideways; always load it short edge first.
5
Slide the edge guide over.
4 × 6
or
5 × 7
8 1/2 × 11
or
8 × 10
Your software works with Windows
® 2000, XP, XP Professional x64 Edition,
Windows Vista
®, and Mac OS
® X 10.3.9, 10.4.11, and 10.5.x.
Windows
1
Make sure the printer is NOT CONNECTED to
your computer.
Note: If you see a Found New Hardware screen,
click Cancel and disconnect the USB cable. You
can’t install your software that way.
2
Insert the Artisan 5
Make sure the printer is NOT CONNECTED to
your computer.
2
Insert the Artisan 50 Series software CD.
3
Double-click the
Epson icon.
4
Click Install and follow the on-screen instructions.
5
When prompted, connect a USB cable. Use any open USB port on your
computer.
If you’re using Mac OS X 10.5.x, skip to step 9.
If you’re using Mac OS 10.