Epson EX31 Quick Setup Manual

Text of the manual

Before using the projector, make sure you read the safety instructions in the

User’s Guide on your projector CD. Connect the projector Choose from the following connections: Computer Monitor Port Connect a computer using the VGA cable that came with the projector. Connect one end to the projector’s Computer (Component Video) port, and the oth

Video Player (EX51/EX71)

Connect up to 4 video devices and use the remote control to switch between them. RCA video cable (composite video) (optional) S-Video cable (optional) Component video to VGA cable (optional) Audio cable (optional) HDMI video cable (optional) Camera or USB Device (EX51/EX71) Connect a digital camera or other USB device to the projec

Adjust the image

1 If you don’t see an image, press the Source Search button on the projector or the remote control to select the image source. 2 To raise the image, press the foot release button and lift the front of the projector. Release the button to lock the foot in position. 3 Turn the focus ring to sharpen the image. 4 EX51/EX71: To reduce or enlar

Where to get help

Manual For more information about using the projector, install the User’s Guide from your projector CD. Telephone Support Services To use the Epson PrivateLine ® Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card included with your projector. This service is available 6 AM to 6 PM, Pacific Time,

Avant d’utiliser le projecteur, assurez-vous de lire les instructions de sécurité

dans le Guide de l’utilisateur sur le CD de votre projecteur. Branchez le projecteur Choisissez parmi les connexions suivantes : Port moniteur de l’ordinateur Branchez un ordinateur en utilisant le câble VGA qui est fourni avec le projecteur. Branc

Lecteur vidéo (EX51/EX71)

Vous pouvez brancher jusqu’à 4 dispositifs vidéo différents et utilisez la télécommande pour passer de l’un à l’autre. Câble vidéo RCA (vidéo composite) (optionnel) Câble S-Vidéo (optionnel) Câble vidéo composantes à VGA (optionnel) Câble audio (optionnel) Câble vidéo HDMI (optionnel) Appareil photo numériqu

L’anglais est la langue par défaut dans le système des menus. Pour voir

les menus en français, appuyez sur le bouton Menu de la télécommande ou du projecteur. Sélectionnez le menu Extended (Avancé) et appuyez sur le bouton Enter (Entrée), ensuite sélectionnez Language (Langue) et appuyez sur le bouton Enter (Entrée). Sélectionnez Français et

Change les diapositives

d’une présentation (connexion USB seulement) Accède aux menus du projecteur Choisit la source à afficher Commande du volume du projecteur Met le projecteur sous et hors tension Désactive l’affichage et le son du projecteur Permet d’obtenir des solutions aux problèmes courants Permet de naviguer à travers les menus du proje

Other Projector Manuals