Teletype WorldNav 5200 Hardware User's Manual
Text of Teletype WorldNav 5200 Hardware User's Manual
All rights reserved. No parts of this work may be reproduced in
any form or by any means - graphic, electronic, or mechanical,
including photocopying, recording, taping, or information
storage and retrieval systems - without the written permission
of the publisher.
Products that are referred to in this document may be either
trademarks and/or registered trademarks of the respective
owners. The publisher and the author make no claim to these
trademarks.
Whi
© 2011 TeleType GPS
3
Table of Contents
Part I Getting Started
6
..............................................................................6
1 Disclaimer
..............................................................................8
2 Accessories
..............................................................................9
3 Specifications
Part II Basic Operation
12
Part III Main Menu
16
....................................................
5200 Hardware User Guide
6
© 2011 TeleType GPS
1
Getting Started
1.1
Disclaimer
Use the WorldNav at your own risk. To reduce the
risk of unsafe operation, please carefully review
and understand this user manual.
It is the user's responsibility to use this product
prudently. This product is intended to be used only
as a navigational aid and must not be used for any
purpose requiring precise measurement of
direction, distance, location, or topography
© 2011 TeleType GPS 7
Getting Started
For use in vehicles, it is the sole responsibility of the
operator of the TeleType GPS WorldNav to place
and secure the GPS unit so that it will not interfere
with the vehicle operating controls and safety
devices, obstruct the driver's view of driving
conditions, or cause damage or personal injury in
the event of an accident. Do not mount the
TeleType GPS WorldNav in a place where the driver
or passengers are likely
© 2011 TeleType GPS 9
Getting Started
1.3
Specifications
CPU
SiRF Atlas V ARM 11 533MHz
NAND Flash
4 GB
DDR
128 MB
LCD
5.0 inch TFT screen, resolution: 800
x 480 pixels
Touch Screen
High precision touch screen
USB
USB Client 2.0,MINI USB interface
Micro SD
Micro SD slot, supports Micro SD
card (maximum 32GB)
Antenna
Internal antenna
Precision
Position < 10 meters / 32 ft
Audio frequency
1. 2Watt Built-in Speaker
2. Hi-Fi stereo sound
3. 20mW@32ohm audio
5200 Hardware User Guide 12
© 2011 TeleType GPS
2
Basic Operation
Turning on and off
Turn on or off your GPS by pressing the power
button on the top of the device.
Hardware Reset
Occasionally, you may need to perform a hardware
reset when your GPS stops responding or appears
to be "frozen" or "locked up." You can perform a
reset by pressing the RESET button on the back of
the device.
Power Supply
In addition to the built-in lithium battery, you ma
© 2011 TeleType GPS 13
Basic Operation
finger or a stylus pen (included). Simply press the
desired icon or location on the map to move the
screen.
Window Mount
Attach your device to the included window mount
and position in a location where it has an
unobstructed view of the sky so it receives a strong
satellite signal. You may choose to provide some
additional cushioning, such as foam on your
dashboard, to help absorb shock.
5200 Hardware User Guide 16
© 2011 TeleType GPS
3
Main Menu
Main Menu Page 1
• Navigation - Provides navigation function
• Bluetooth - Allows you to connect you
Bluetooth-enabled cell phone directly to the GPS;
you can then dial numbers and receive calls
directly from your GPS
• Media Player - Allows you to access media files
such as videos, music and eBooks
• Tools - Offers a variety of useful tools such as a
calculator, notepad and cale
© 2011 TeleType GPS 17
Main Menu
3.1
Navigation
Please carefully read the WorldNav Software Guide
(separate booklet) for navigation instructions.
WorldNav Software
5200 Hardware User Guide
18
© 2011 TeleType GPS
3.2
Bluetooth
This GPS device has the ability to sync with a
Bluetooth-enabled cell phone, allowing you to
make and receive calls directly from your GPS.
Instructions for setting up your Bluetooth feature
are below:
1.
Begin by enabling the Bluet
© 2011 TeleType GPS 19
Main Menu
press the
icon to confirm the pin.
Pin Entry Screen
5.
Click the
icon. This will pair your phone to
the GPS. This may take a few minutes. Once
the phone recognizes the GPS, it will ask for the
pin code, enter 8888 and then confirm. The
pair is complete.
6.
To make calls from your GPS, press the
icon. When receiving calls, the callers phone
number will appear on-screen.
7.
Access your Call Log by pressing on the
icon.
8.
© 2011 TeleType GPS 21
Main Menu
3.4
Tools
By clicking on the icon, you will have access
to features such as a notepad, calculator and
calendar.
Tools Menu
1.
Click on the icon to access your
Notepad. Here you can manually type in notes.
This is useful as a driver log, address book, or
reminder list.
Notepad Screen
5200 Hardware User Guide
22
© 2011 TeleType GPS
2.
Click on the icon to access the
calculator. Here you can switc
© 2011 TeleType GPS 23
Main Menu
3.5
FM Radio
The button enables you to link your GPS to an
unused radio frequency channel, thereby allowing
you to hear your route instructions over the radio
speakers. Select a frequency from the FM Page and
then set your radio dial to that frequency. Be sure
to click the "on" and note that the
GPS will be silent; all sound will broadcast through
the radio.
FM Frequency Selection Screen
5200 Hardware User
© 2011 TeleType GPS 25
Main Menu
Date/Time: This function is used to adjust the
internal calendar. Refer to the WorldNav Software
Guide for instructions on how to set the time for
navigation.
Language: Set the default language. Please note
that the WorldNav software will override these
settings for navigation. Refer to the WorldNav
software user guide for details.
System Info: Displays a detailed summary of system
information:
1.
Calibration - click this
5200 Hardware User Guide 28
© 2011 TeleType GPS
4
Troubleshooting
Problem
Reason
Solution
GPS will not
power on
Lack of Power
Plug the device to AC or
DC power
Power is Off
Slide the Power switch
on the right side to the
ON position
Screen is too dark
The backlight is
not bright enough
Adjust the backlight to
a brighter setting
The backlight has
been turned off
Touch the screen and
the screen will turn on
Touch screen
function is
abnormal
Touch scr
© 2011 TeleType GPS 29
Troubleshooting
Cannot
communicate
with computer
The USB cable is
not connected
well
Check the USB cable;
check ActiveSync
settings; check for USB
conflicts with other
devices
No GPS signal
Poor reception
area such as
inside a building,
an urban area or
mountainous
region;
interference from
another device in
the vehicle
Mount the GPS on the
windshield with a clear
view of the sky; try
obtaining a signal
outside your vehicle;
note th