Samsung L700 - Digital Camera - Compact Operation & User’s Manual

Before connecting the camera to a PC, via the USBcable, you willneed to set upthe camera driver, tnstallthe camera driver p.67) • if you use a card readerto copy the images on the memory card to your PC, the imagescould be damaged. When transferring the imagestaken with thecamera to your PC, be sure to use thesupplied USB cable to connect the camera to your PC. Pleasenote that the manufacturer holdsno responsibilityfor loss or damage of images on the memory card due to the use of a card reader. Thank you for buying a Samsung Digital Camera. • Prior to using thiscamera, please read the user manual thoroughly. • Ifyou requireAfter Sales service, please bringthe camera and the cause of the camera malfunction (such as battery, Memory card etc.) to theA/S centre. • Pleasecheck that the camera is operating properly prior to when you intendto use it (e.g. for a tripor an important event)to avoid disappointment.Samsung camera takes no responsibilityfor any loss or damages that may resultfrom camera malfunction. • Keep the manual in a safe place. • The contentsand illustrations of this manual are subject to change without prior notice for upgrading the camera functions. >kMicrosoft, Windows and Windows logo are registered trademarks of Microsoft Corporationincorporated in the UnitedStates and/or other countries. _kAll brand and product names appearing in this manual are registeredtrademarks of their respective companies. O}

result in death or seriousinjury. • Do not attempt to modify thiscamera in any way. This may result in fire, injury, electric shock or severe damage to )/_ Oryour camera. Internalinspection, maintenance and repairs should b#_car[i_,£ut by your dealer or Samsung Camera Seraicecentre. S!£:,; :_ • Please do not use this product i_ clo ximityto flammable or explosive gase& as this couldincrease;{_e rJsk_#xplceioh • Should any form of liquid d_ foreign _iect enterRe camera, do not use k. Switch off the camera, _ then disc_ct the po'_q_source. You must contact your dealer or Samsun_ Camera Sewi_ centre. Do _t continueto use the camera as this may cause __ _df"el_Ctri__. _ • De not insert or drop rn_!jc _ inS_rn_le f_eigl_'objects into the camera through access points _e_dy _dl_a_ _ttery chamber. This may cause a fire or electric shock. • De not operate thiscamera with wet hands. This could pose a risk of electric shock. WARNING indicates a potentially hazardous situationwhich, if not avoided, could resultin death or serious injury. • Do not use the flash in close proximity to people or animals. Positioningthe flash too close to your subject'seyes maycause eyesightdamage. i For safety reasons keep this product and accessoriesout of reach of children or animals to prevent accidentse.g.:_:_ _,;; • Swallowing batteryor small ca.mer_egd_ories, tfan accident should occur, please consult a doctor im_iat ;i_ •There isthe possibilityof !!)_.lryfro_i _ cam_a's moving parts. Battery and camera may_.2;eme bettering proldP_eduse and it may result in camera malfunction.ShqBIdthis be t[@:_se, allow_e camera to sit idle for a few minutes to allow it _me to cool. Do not leave this camera_aplacess,ubject:te_e_t_em_ hightemperatures, such as a sealed vehicle,dir_ct_s_n!_h!,_e, __es 0_e_treme variances in temperature. Exposure [e _xt(eme_a_r_i_q&y'sdver sely affect the camera's internalcomponents and could cause a fire. • When in use,do not cover the camera orCharger. This may cause heat to build up and distortthe camera body or cause a fire. Always use the camera and its accessories in a well-ventilated area. {2}

result in aminor or moderate injury. • Leaking, overheating, or burst batterycould result in fireor injury. • Use batterywith the correct specification for the camera. • Do not short circuit,heat or dispose of battery in fire. • Do not insertthe battery with the I_Ot_,r;tiesreversed. • Remove the batterywhen not plan_ing t0_#e thecamera for a long period of Battery may leak corrosive#/e_e a_qdpermanently damage time. the camera's components. _ _i, • Do not fire theflash while it i_n cont_i_ith ha_s or objects. Do not touch the flash after usingit continuc_u_ly,it may_use bur_ • Do net move the camera<_N_eit is s_/tcbed on wh_ you are using theAO Charger. After use always switch off _camera before unpluggingthe cable from the wall socket. Tl_[en_ke sure _at _y_br cords or cablesto cther devices are disco_ept _ b_q,re _ov!_i_b _ _era. Failureto do so may damage the cords or c_s_ _e _ fi_ _t @:eCt_cshock. • Take care not to touch the lens orlens cover to avoid taking an unclear image and possiblycausing camera malfunction. • Avoid obstructingthe lens or the flash when you capture an image. • Credit cards may be demagnetized if [eftnear case.Avoid leaving magnetic strip cards near thecase. • System chart ........................... 5 • Identificationof features............... 6 • Front & Top ........................... 6 • Back& Bottom ........................ 7 • Bottom / 5-functionbutton ......... 8 • Self-timer lamp ........................ 8 • Camera Status Lamp ............... 8 • Mode icon .............................. 9 • Connectingto a Power Source .-...9 • Inserting the memory card ......... 10 • Instructionson how to use the memory card ........................... 11 • LODmonitor indicator ............... 13 • Changing the recording mode ... 14 • Selecting the [MODE] menu ...... 14 • Changing the recording mode ...14 • Startingthe recording mode ...... 15 • How to usethe Auto mode ......... 15 • How to use the Movie clip mode... 16 • Recordingthe movie clip without sound ................................. 16 • Pausingwhile recording amovie clip (Successive Recording) ............ 16 • Using Successive Recording......16 • How to use the Program mode ...17 • How to use the Scene modes ...17 • How to use the VOICE RECORDING mode ............... 18 • Things to Watch Out for When Taking Pictures........................ 18 • Usingthe camera buttons to set the camera ................................. 19 • POWER button ..................... 19 • Shutter button ........................ 19 • ZOOM W/T button ............... 19 • TELE Zoom ........................... 19 • WIDE Zoom ........................... 20 • Voice recording/ Voice memo / UP button ................................. 21 • Recording a voice memo ......... 21 • Macro / Downbutton ............... 21 • Focus lock ........................... 22 • Flash / Left button ................. 22 • Self-timer / Right button ............ 24 • MENU / OK button ................. .25 • M (Mode) button .................... .25 • E (Effect)button .................... 26 • Special Effect : Colour ............ 27 • Special Effect : Preset focusframes ............... 27 • Movie Clipframe stabiliser ......... 28

........................... 29 • Usingthe LCD monitor to set the camera settings ..................... 31 • How to use the menu ............... 32 • Mode Set .............................. 33 • Mode.................................... 33 • Size .................................... 34 • Quality / Frame rate ............... 34 • Metering .............................. 35 • Continuous shot ..................... 35 • Sharpness ........................... 35 • OSD (On Screen Display) information ........................... 36 • Starting play mode .................. 36 • Playingback a movie clip ......... 37 • Movie clip capture function ......... 37 • Row to capture the movie clip ...37 • On camera movie trimming ...... 37 • Playingback a recordedvoice ...38 • LCD monitor indicator ............... 38 • Usingthe camera buttons to adjust the camera ........................... 38 • Playmode button ..................... 38 • Thumbnail / Enlargementbutton ...39 • Voice memo / Up button............ 40 (4} • Play& Pause / Down button ...... 41 • Left/ Right / Menu / OK button ...41 • E (Effect)button .................... 41 • Deletebutton ....................... 41 • Setting up the play back function usingthe LCD monitor ............... 42 • Startingthe slideshow ............ 44 • On Screen Displayinformation ..-45 • Rotatingan image ................. 45 • Resize ................................. 46 • Protecting images ................. 46 • Deleting images .................... 47 • Copy To Card ....................... 47 • DPOF ................................. 48 • DPOF : STANDARD ............... 48 • DPOF : Index ....................... 48 • DPOF : Printsize ................. 49 • PictBfidge.............................. 49 • PictBridge: Picture Selection...-.50 • PictBridge: Print Setting............ 50 • PictBridge: Print .................... .51 • PictBridge: RESET ............... 52 • Setup menu ........................... 52 • Filename .............................. 53 • Auto power oft ........................ 54 • Language .............................. 54 • Format ................................. 54 • Setting upthe Date/Time / Date type .................................... 55 • World Time ........................... 55 • Imprintingthe recordingdate -..-..55 • Auto Focus lamp .................... .55 • Sound ................................. 55 • Connecting an External Device (USB) ................................. 55 • LCD brightness .................... .56 • Selecting Video outtype ............ 56 • Quick view ........................... 56 • Initialisation ........................... 56 • Setting up the Mycam menu ...... 57 • Start up image ....................... .57 • Start up sound ....................... -57 • Shutter sound ....................... -57 • important notes .................... .58 • Warning indicator .................... .59 • Beforecon_eting a servicecentre...60 • Specifications ....................... .61 • Software Notes ....................... 83 • System Requirements ............... 53 • About the software ................. .63 • Settingupthe applicationsoft,,vare...64 • Starting PCmode ..................... 66 • Removing the removable disk ...68 • SettinguptheUSBDriverfor MAC ...68 • Usingthe USB Driver for MAC ...68 • Removing the USB Driver for Windows 98SE ........................ 69 • Digimax Master ..................... 69 • FAQ .................................... 72

J User manual, Camera strap Product warranty ] i i i SD memory card / MMC (see p 12) Software CD (see p63) Computer PictBridge compatible (see p.66} printer (see p49) t USBcable AV cable AC cord .-I- Charger (SBC-L5) Rechargeaple battery (SLB-0837) J External monitor (see p 56) <5}

{7}

Flash/ Left button ..._ . Menu / OK button Self-timer/ Right button Macro / Down button Play & Pause button • Self-timer lamp Icon Status Description - Forthefirst 7seconds,theIampbrinksat 1secondintervals. Blinking - For thefinal 3 seconds, the lamp blinks quickly at 0.25- second intervals. For the 2 seconds the lamp brinksquickly at 0.25-second ®_s Blinking intervals. A picture willbe taken after about 10 secondsand 2 _* seconds later a second picture willbe taken. Blinking • Camera Status Lamp Status Description Power on The lamp turns on and off whenthe camera is ready to take a picture The lamp blinkswhile saving the imagedata and After taking a picture turnsoff when the camera is ready to take a picture When the USB cable is The lamp lights up inserted to a PC LCD monitor turnsoff after initializingthe device) Transmitting Data with a PC The lamp brinks (LCD monitor turns of0 When the USB cable is The lamp is off inserted to a printer When the printer isprinting The lamp blinks

CLOSEUP ICON _ _ _ _ [] _1 MODE SUNSET DAWN BACKLIGNTFIREWORKSBEACH&SNOW ICON D [] _ [] [] • You should use the rechargeable battery (SLB-0837) suppliedwith the camera. • SLB-0837 recbergeable battery Specification Model SLB-0&37 Type Lithium Ion Capacity 860mAh Voltage 3.7V Charging time Approx. 150 MIN (Using the SBC-L5) • Number of images and battery life: Usingthe SLB-0837 i Batterylife Numberd images Approx.85 MIN Approx.170 Usingthefu0ychargedbattery,Automode 7Mimagesize,Fineimagequality Shotto shotinterval:30Sec. Changingthezoomposition betweentheWideandtheTeleendsevery 1shot. _S'd6 Usingtheflasheverytwotimes Recordingtime _ox. 70 MIN BasedUsingthe fullychargedbattery 0_ 640X480imagesize the 30fpsframerate _i_ng she0 r_,_ ÷ These figures are measured under Samsung's standardconditions and Shooting conditions and may varydepending on the way of user's usage. {9}

opened, do not press the battery chambercover byforce. This maycause damage to the battery chamber cover. • There are 4 indicators for battery condition that are displayedon the LCD monitor. Battery indicator _ I_ Low battery Low battery Low battery capacity capacity capacity Battery The batteryis (Prepare to (Prepare to (Prepareto status fully charged rechargeor use recharge oruse recharge or use spare battery) spare battery) spare battery) • Insertthe memory card asshown. - Turn offthe camera's power before insertingthe memory card. - Have the front of the memory card facing toward the front of the camera (lens) and the card pins toward the back of the camera (LCD monitor). - Do not insert the memory card in the wrong way round. Doing so may damage the memory card slot. (lO_

purchased memory for thefirst time, if it contains data that the camera cannot resegnise, orif it contains imagescaptured with a different camera. • Turn off the camera power whenever the memory card is being insertedor removed. • Repeated use of the memory card will eventuallyreduce the memory card's performance.Should this be the case, you will needto purchase a new memory card.Wear and tearon the memory card is notcovered by the Samsung warranty. • The memory card is an electronic precision device. Do not bend, drop or subject the memory card to any heavy impact. • Do not storethe memory card in an environment with strong electronic or magneticfields, e.g. near loud speakersor TV receivers. • Pleasedo notuse or store in an environment where there are extremes in temperature. • Do not allowthe memory card to become dirty orto come intocontact with any liquid.Should this happen, clean the memory card with a soft cloth. • Please keep the memory card in its case when notin use. • During and after periods of extended use, you may notice that the memory card iswarm. This is perfectly normal. • Do not use a memory card that isused in another digitalcamera. To use the memory card in this camera,format the memory card using this camera. • Do not use a memory card formatted by anotherdigital camera or memory card reader. • Ifthe memory card issubjected to any of the following, the recorded data may becomecorrupted : - When the memory card is used incorrectly. - Ifthe power isswitched off or the memory card is removedwhile recording, deleting (formatting)or reading. • Samsungcannot be held responsiblefor lost data. • It isadvisable to copy important data onto other mediaas back-up e.g. floppy disks,hard disks,CD etc. • Ifthere isinsufficientmemory available : A [Memory Full!] message will appear and the camera will net operate. To optimisethe amount of memory in the camera, replace the memory card or deleteunnecessary images storedon the memory card. {11}

Please consult the enclosed manual for usingthe MMC Cards. [SD (Secure DigitaOmemory card] The SD/SDHC memory card has a write protect switch that prevents imagefiles from being deleted orformatted. By sliding the switch to the bottom of the SD memory card, the data witl be protected. By sliding the switch to the top of the SD memory card, the data protectionwill be cancelled. Slide the switch to the top of the SD memory card before taking a picture. • When usinga 256MB MMC memory,the specified shooting capadty wilt be as follows. These figures are approximate as image capadties can be affectedby variables such assubject matter and memory card type. Recordedfinagesize Super Fine Fine Normal 30FPS 15FPS 7M 76 113 193 Still 5M 93 159 272 tmage 3M 173 266 425 1M 560 673 743 *Movie 640 About 11' About f8' clip 320 About 40' About 67' ÷ The recording times can be changed bythe zoom operation. The zoom button doesn't use during the movie recording. {12}

®-- @m ®-- ®-- ®m ®m @ @ m@ m@ m© m@ m@ m@ m@ m@ ]image & Full Status] No Description Icons Page rareDGl_Qg 1 Recording mode i_1 g i[_1 IE]I i_ G_!Ill_ll i._!I p.15~18 2 Battery _ C]_] _ _ p.10 3 Continuousshot [] _ AEB p.35 No. Description Icons Page Flash _ ,_ _ _s 1_) p.22~24 4 Without Sound (_ p.16 5 Self-timer _t_ ®2s _ p.24 6 Macro _ _ p.21~22 7 Metering [] rzI p.35 8 Card inserted indicator _ 9 Autofocus frame [_ 10 Camerashake warning _ p 18 11 Date/Time 2007.01.01 01:00 PM p.55 12 Exposure compensation [] p31 13 White Balance AWB_? a,, _ _ @ _,,_ p30 14 ISO _ _ _ _ s_ _ _ p29 15 RGB RGB p29 16 Sharpness [] [] [] p.35 17 Image quality iiii _ %: _ _ p34 18 image size _ [] _ [] p.34 Numberofavailable shotsemaining 12 p.12 19 Remaini gtime(Movie cipIV0ic_ lec0rdi g[ 00:01:30/01:00:00 p.12 20 Voice memo We p.21 21 Optical/Digital Zoom bar/ DigitalZoom rate I I | XS.0 p.19~20 (13}

1. insert the battery (p.10). 2. Insert the memory card (p.lO). As this camera has a20MB internal memory, it is notessential to insertthe memory card. if the memory card is not inserted, an image will be stored inthe intemal memory.If the memory card is inserted, an image will be storedon the memory card. 3. Close thebattery chamber cover. 4. Press thepower button to turnon thecamera. 5. Press the menu button and a menu willdisplay. 6. Use the Left / Right buttonto select the [MODE] menu. 7. Select [STILL & MOVIE] or [FULL] sub menu by pressingthe UP/ DOWN button. - [STILL & MOVIE] :A stitlimage mode that was selectedon the [MODE SET] menu and movie clip mode can be selected. Referto page 51for more information about usingthe [MODE SET] menu. - [FULL] :Auto, Program, Movie clip and scene modes can be selected. 8. Press the MENU button and the menu willdisappear. • Changing the recording mode : tf the [STILL & MOVIE] menu was selected Stepsfrom 1-4 are the same as those for selectingthe [MODE] menu. 5. The recording mode of still image selectedin the [MODE SET] menu will display. 6. Pressthe M (Mode) button locatedon the back of the camera and the recording mode willchange to the movie clip mode. 7. Pressthe M (Mode) buttonagain and a still image mode selected on the [MODE SET] menu will be selected. I£1,_ [Pressingthe M (Mode) button] _.- [AUTO mode] [MOVIE CLIP mode] {14}

Steps from 1-4are the same as those for selectingthe [MODE] menu. 5. The recording mode of stiltimage selected in the [MODE SET] menu will display. 6. Pressthe M (Mode[ button located on the back of the camera and the mode selection menu wil_display. 7. To select the Auto Program, Movie clip or Scene modes, press the Left / Right button. To move between the Auto, Manual,Movie clip menu lineand Scene menu line, pressthe Up/ Down button. [Mode selection menu] {Select}rigthe Movieclipmode] [Selecting the Scene mode] • How to use the Auto mode( _ ) Use this for shooting basic stillimages. 1. Select the [FULL] sub menu on the [MODE] menu (p.t4). 2. Select the Auto mode by pressingthe M (Mode[ button (p.15). 3. Pointthe camera towards the subject and compose the image by usingthe LCD monitor. 4. Pressthe shutter buttonto capture an image. [Pressing tt_eLeft button] [Pressing the Up button[ 8. Pressthe M (Mode) button to selectthe mode and the mode selection menu will disappear. [AUTO mode] (15}

Ifyou wish to stoprecording, press the shutter buttonagain. _, Imagesize and type are listed below. - Image size : 640X480,320X240 (user selectable) - Movie clip file type :AVl (MPEG-4) [MOVIE CLIP mode1 g Recordingthe movie clip without sound You can record the movie clip without sound. Steps from 1-3 arethe same as those for MOVIE CLIP mode. 4. Pressthe Up button and the ((_)) icon will display on the LCD monitor. 5. Pressthe shutter button and movie dip is recorded for as long asthe availablerecording timewithout sound. 6. To stop the recording, press theshutter button again. g Pausing while recording a movie clip (Successive Recording) This camera allows you to temporarily stop during unwanted scenes, while recording a movie clip. Usingthis function, you can record your favourite scenes into a movie clip without having to create multiple movie clips. ® Using Successive Recording Steps from 1-2are the same asthose for MOVIE CLIP mode. 3. Pointthe camera towards the subject and compose the image by usingthe LCD monitor. Pressthe shutter button and movie clips are recordedfor as longasthe available recording time. Movie clips will still be recorded if the shutter button isreleased. 4. Press the Pause button ( _ ) to pause recording. 5. Press the Pause button ( _ ) again to resume the recording. 6. if you wish to stop recording,press the shutter button again. [Successive lecordillgofa movecip] {16}

) Selecting the automatic mode will configure the camera with optimal settings and you can manually configure various functions. 1. Selectthe [FULL] sub menu on the [MODE] menu (p.14). 2. Selectthe Program mode by pressing the M (Mode) button (p.15). 3. Pointthe camera towards the subject and compose the image by usingthe LCD monitor. 4. Pressthe shutter buttonto capture an image. [PROGRAM mode] • How to use the Scene modes( SCENE ) use the menu to easily configureoptimal settings for a variety of shooting situations. 1. Selectthe [FULL] sub menu on the [MODE] menu (p.14). 2. Selectthe Scene mode by pressing the M (Mode) button (p.15). 3. Pointthe camera towards the subject and compose the image by usingthe LCD monitor. 4. Pressthe shutter buttonto capture an image. [SCENEmode] ÷ The scene modes are listed below. [NIGHT] ( t_l ) : Usethis for shooting stillimages at night or in other [PORTRAIT] ( I_ ) [CHILDREN] ( I[] ) [LANDSCAPE] ( D ) [TEXq ( IOI ) [CLOSE UP] ( Q ) [SUNSET] ( I_1 ) [DAWN]( IO ) [BACKUGHq ( _ ) [FIREWORKS] ( m ) [BEACH&SNOW] ( [] ) dark conditions. :To take a picture of a person. :To take apicture of fast moving objects, for example, children. :To take pictures of distant scenery. : Usethis mode to shoot a document. :Close-up shootingfor small objects such as plants and insects. : For taking pictures of sunsets. : Daybreak scenes. : Portraitwithout shadows caused by backlight. : Firework scenes. : For ocean, lake, beach and snowscape scenes. (17}

) A voice recording can be recordedfor as long asthe memory capacity allows.(Max. 1hour) 1. In any mode with the exception of Movie clip mode, select the VOICE RECORDING mode by pressing the Voice recording button twice. 2. Press theshutter button to record a voice. - Pressthe shutter button once and voice is recorded for as long asthe available recording time allows.The recording time wilt be displayed on the LCD monitor.Voice willstill be recorded if the shutterbutton is released. - Ifyou wish to stop recording,press the shutter button again. - Fite type : *.way * A distanceof 40cm between you and the camera (microphone) isthe best distanceto record sound. {18} [VOICE RECORDINGmode] • Pressingthe shutter button down half way. Lightlypress the shutterbutton to confirm focusand flash battery charge. Pressthe shutter button all way down to take the picture. [Lightly press the shutter button [Press the shutter button] • The available memory capacity may vary depending on shootingconditions and camera settings. • Whenthe FlashOff orSlow synchromode isselectedin a low lightingcondition,the _a camerashake warningindicator( _ ) may appearonthe LCDmonitor.In thiscase, use atripod supportthecamera ona solidsurfaceorchangeto flashshot mode. • Shooting againstthe light : Please do not take picturesto the sunlight direction.Taking a picture againstthe sun may make the picture dark. To take a picture againstthe sun, please use the [Backlight] in the scene shooting mode (see page 17),fill-inflash (see page23), spot metering (see page35) or exposure compensation (see page31). • Avoid obstructingthe lens or the flash when you capture an image. • Compose the image by usingthe LCD monitor. • Under certain conditions the auto focus system maynot perform as expected. - When photographing a subject that has little contrast. - If the subject is highly reflectiveor shiny. - tf the subject is movingat high speed. - When there is strong reflected light, orwhen the background is very bright. - When the subject matter has only horizontal lines orthe subject isvery narrow (such as a stick or flagpole). - When the surroundings are dark.

asthe OPTICAL ZOOM or DIGITAL ZOOM button. • Used for turningthe camera's poweron / off. • Ifthere is no operation duringthe specified time, the camera's power willbe turned off automaticallyto save battery life. Referto page 54 for more information about the auto poweroft function. • Used for taking an image or recording voice in the RECORDING mode. • In MOVIE CLIP mode : Pressingthe shutterbutton downfully starts the process for recording a movie clip. Pressthe shutterbutton once and the movie clip is recordedfor as longas the available recording time inthe memory allows. If you wish to stop recording,press the shutter button again. • tn STILL IMAGE mode Pressingthe shutter button down halfway activatesthe autofocus and checks the condition of the flash. Pressingthe shutter button downfully takes and steres the image. Ifyou select voice memo recording,the recording will start after the camera has finished storingthe imagedata. • This camera has a 3X opticalzoom and a 5X digital zoom function. Usingbeth will offer a total zoom ratio of 15X. • TELE Zoom Optical zoom TELE :Pressing theZOOM T button.This wiltzoom into the subject i.e. the subjectwill appear nearer. Digital zoom TELE :When the maximum (3X) opticalzoom is selected pressing the ZOOM T button activates thedigital zoom so_'_are. ReleasingZOOM T button stopsthe digital zooming at the required setting.Once the maximum digital zoom (5X) is achieved, pressingthe ZOOM T button will have no effect. [WIDE zoom] FELE zoom] [Digitalzoom 50X] (19)

[WIDE zoom] Digitalzoom WIDE :When the digital zoom is in operation, pressing the ZOOM W button will reduce thedigital zooming in Opticalzoom steps. ReleasingZOOM W button stopsdigital r q _X5.0 zooming. Pressingthe ZOOM W buttonwill reducethe Digitalzoom digital zoom and then it will continue to reduce the optical zoom until the minimum setting is reached. _20} [Digital zoom 5.OX] FELE zoom] [WIDE zoom]

When the menu is not displayedon the LCD monitor, the UP button operatesas the voice recording orvoice memo ( _ ) button. You can add your voice-over to a storedstill image. Refer to page 18 for more information about the voice recording. ® Recordinga voice memo 1. SelectaRECORDINGmode withthe exceptionof MOVIECLIPmode.(p15,17) 2. Pressthe VOICE MEMO ( _ ) button. Ifthevoice memo indicator is displayed on the LOD monitor,the setting is completed. [Preparing for Voice Memo] [Recording Voice Memo] • While the menu isshowing, press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu.When the menu is not showing, you can use the MACRO / DOWN button to take macro pictures. The distanceranges are shown below. Pressthe Macro button until the desired macro mode indicatordisplays on the LOD monitor. 3. Pressthe shutter buttonand take a picture.The picture isstored on the memory card. 4. Voice memo will be recorded for ten seconds from the moment the picture is stored In the middle of thesound recording, pressing the shutterbutton wi]l stop the voice memo. [Autofocus-Noicon] [Macro( _ )] [Automacro(,_)] • Types d focus modes and focus ranges(W : Wide,T : Tele) (Unit : cm) Mode Auto ( _ ) Program ( r_J ) FocusType Automacro( J_ ) Normal Macro ( _ ) Normal W :5~Infinity W : 80~Infinity W :5~80 W : 80~Infinity Focusrange T : 40~Infinity T : 80-,,Infinity T : 40-,,80 T : 80_Infinity (21}

(O :Selectabte, X : Not selectable,o_: Infinityfocus range) Mode D Normal O O Macro O X Automacro X O SCENE Mode It_l Q O O IBI G Normal O O O co X X Macro X X X X X O Automacro X X X X O X O O X co co O co O X X X X X X X X X X • Tofocuson asubjectnotpositionedinthecentreofthepicture,usethefocuslockfunction. • Using the Focus Lock 1. Ensure the subject is in the centre of the autofocus frame. 2. Pressthe SHUTrER buttonhalfway. When the green autofocus frame lights up, it means the camera isfocused on the subject. Be careful notto press the SHUTTER button all the way down to avoid taking an unwanted picture. 3. With the SHUTTER button still presseddown only halfway, move the camera to recompose your picture asdesired, and then press the SHUTTER button completelyto take the picture. Ifyou release your finger from the SHU]qER button,the focus lock function will be cancelled. 1 The image to be 2 Press the SHUTTER 3 Recompose the picture captured button halfway and and fully depress the focus on the subject SHU_ER button {22} • When the menu isdisplayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab. • When the menu is netdisplayed on the LCD monitor, the LEFT button operates asthe FLASH ( _. )button. • Selecting the flash mode 1. Selecta RECORDINGmodewith theexceptiond MOVIECLIP mode.(pl 5,17) 2. Pressthe Flash button until thedesired flash mode indicator displays on the LCD monitor. 3. A flash mode indicator willbe displayed on the LCD monitor. Use the correctflash to suitthe environment. [Se{ectlngthe Autoflash] • Flashrange (Unit : m) ISO AUTO 0_ ~ 0.8 0.5,,_0.8 0.4 ~ 3.0 0.5 ~ 2.5 I

• Flash mode indicator Menu tab Flash mode Auto flash Auto & (_ Redeye reduction _1- Fillinflash _s Slow synchro _"_ Flash off Description Ifthesubject orbackground isdark, thecamera flash willoperate automatically. tfasubject orbackground isdark, thecamera flash wiltwork automatically andwillreduce thered-eye effect byusing thered-eye reduction function. Theflash firesregardless ofavailable light. Theintensity oftheflash witlbecontrolled, according totheprevailing conditions. Thebrighter thebackground orsubject is,thelessintense the flash willbe. Theflash willoperate inconjunction withaslow shutter speed inorder toobtain thecorrect exposure. When youtakeanimage inacondition withpoor light, thecamera shake warning indicato (_")_)wiltdisplay ontheLCD monitor. Werecommend using atripod forthisfunction. Theflash does notfire.Select thismode when capturing images inaplace orsituation where flash photography isprohibited. When youcapture an image inapoorly litcondition, thecamera shake warning indicator (_("_)willdisplay ontheLCD monitor. Werecommend using atripod forthisfunction. (23/

makes the cursor shift to the righttab. • When the menu isnot displayed on the LCD monitor, the RIGHTbutton operates asthe Self-timer( _ ) button. This function is used when the photographer would also like to be in the image. • Selecting the serf-timer 1. Select a RECORDING mode with the exceptionof VOICE RECORDING mode. (p.15~17) 2. Pressthe SELF-TIMER button until the desired mode indicatordisplays on the LCD monitor. A 10 second, 2 second or double self-timer icon appears on the LCD monitor, tn Movie Clip mode, ontythe 10-secood self-timerwill work. • 10SEOself-timer ( _ ): Pressingthe shutter button willallow an interval of 10seconds before the image istaken. • 2SEC self-timer ( ®2s ): Pressingthe shutter button willallow an interval of 2 seconds before the image istaken. • Double self-fimer ( _'_ ): A picture will be taken after about 10 seconds and 2seconds later a secondpicture willbe taken. When usingthe flash,the 2-second self-timer may be delayed for longerthan 2seconds depending on the flash charging time. 3. When you press the SHUTi-ER button, the picture will betaken after the specifiedtime has elapsed. [$el_ting the 108ECself4irner] {24}

- When the menu is displayedon the LCD monitor, thisbutton isused for shifting the cursor to the sub menu or for confirming data, • You can select the desired recording mode. The selectable recording modes are differentfrom what you selected sub menu inthe [MODE] menu. - ]STILL & MOVIE] : A recording mode selected inthe [MODE SET] menu, Movie clip mode - ]FULL] : Auto, Movie clip, Program,Scene modes • Now to use the mode button : tn case of ]STILL & MOVIE] and [AUTO] sub menu [Pressing the M button] [Auto mode] [Movie clip mode] (25_

[Automode] [PressingtheModebuttonl [PressingtheRightbutton] [Mode selection menu] [] [] [PressingtheLeftbutton] [PressingtheUpbutton] [Scene mode] [Program mode] [Movie cliip mode] • Itis possible to add spedal effects to your images by usingthis button • Still image mode : You can select the colour and focus menus. Movie clip mode : You can select the colour and stabilizer menus. • Available Effects, by recording mode (0 : Selectable X : Not selectable) ........... D I';1 I:_ IE"I Q D Q 1_ o o o o o o o r_ x x o x x x x o x x x x x x _t This button willnot operate in the Voice recording mode and some scene modes [Night, Text, Sunset, Dawn, Backlight, Fireworks and Beach & Snow) Even if the camera is turned off,the specialeffect setting will be preserved. To cancelthe special effect, selectthe _ sub menu in the Oolour menu and selectthe _ sub menu in the rest special effect menu. {26} [Pressing the Left/ Right button] If_ [Selecting a scene mode]

your images. 1. Pressthe E button inthe availab(ecamera modes. 2. Selectthe ( D ) menu tab by pressing the Left / Right button. [Still image mode] [Movte dip mode] • You can make the subject stand out from its surroundings.The subject will be sharp and in focus while makingthe rest outof focus. 1. Pressthe E button in the Program mode. 2. Select the ( _ ) menu tab by pressingthe Left / Right button. 3. Se(ect adesired sub menu by pressing the Up / Downbutton and press the OK button. 3. Selecta desired sub menu by pressing the Up / Down button and press the OK button. : No effect isadded to the )mage _, : Captured imageswi((be stored )nblack and white. : Captured(mages will be stored in a sepiatone (agradient of yellowishbrown colours). : Captured imageswil) be stored in a blue tone. : Captured imageswil) be stored in a red tone. : Captured imageswi((be stored in a green tone. : Savethe imagein negative mode. 4. Pressthe shutter buttonto capture an image. [Range 1] [Range 2] [Range 3] [Range 4) 4. The presetfocus frame willappear. Pressthe shutterbutton to capture an image _[27}

button to move the focus frame position. 4. To select the focusframe position,press the + / - buttonagain and you can takea picture Pressing the + / - button [The frame isactivated] • This function helps stabilise imagescaptured during movie recording. You can selectthis menu only in the MOVIE CLIP mode. tf the memory card is not inserted, thisfunction will not operate. • Howto usethis function 1. Press the E button in the Movie clip mode. 2. Select the STABILISER menu by pressing the Left / Right button. 3. Select a desired sub menu by pressing the Up / Down button and press the OK button. - [] : Movie clip frame stabiliser function becomesdisabled. - [] : Prevents camera shake during movie recording. The recordingframe range wilt become narrowerthan when you selectthe [] menu. Pre-viewframes may notdisplay smoothly on the LCD monitor. Pressing the i Up/Down/Left/ _ Rightbu_on Pressing the +/- button {28} [Aftercha_gi_gtheframeposition]

and exposure compensation. Main menu Sub menu Availablecameramade RGB R (Red), G (Green), B (Blue) _ [] ISO AUTO, 50, 100, 200, 400, 800,1600 [] AUTO, DAYLIGHT,CLOUDY, WHITE BALANCE FLUORESCENTH, FLUORESCENTL _ [] TUNGSTEN,CUSTOM Exposurecompensation -2.0- 0.0~ +2.0 (0.5EVsteps) _ [] • RGB :Allows the user to adjust the R (Red), G (Green),and B (Blue) valuesof the imagesto be captured. • Setting RGB Values 1. Pressthe +/- button and then use the UP and DOWN buttons to selectthe RGB icon ( RGB). The RGB menu bar wiltappear as shown. 2. Usethe UP/ DOWN / LEFT and RIGHT buttons to select thedesired RGB value. - Up/ Down Button : Navigatesbetween R, G, and B icons. - Left/ Right Button :Changes value of each icon. 3. When you press the + / - button again, the value you set will be saved and RGB setup mode will end. ÷ When special effect (colour)from the icon other than i_ isselected, it will not be ableto select the RGB. • ISO : You can select the tSO sensitivity when taking pictures. The speedor specific light-sensitivityof a camera is rated by ISOnumbers. • Selecting an ISO Sensitivity 1. Pressthe +/- button,and then use the UP and DOWN buttons to selectthe ISOicon ( [] ). The ISOmenu bar wilt appear as shown. 2. Use the LEFT and RIGHT buttonsto select the desired ISOsensitivity value. - AUTO : The camera's sensitivity isautomatically changed by variables such as lighting value or subject brightness. - 50, 100,200, 400, 800, 1600 : You can increase the shutterspeed while the same amount of light is present, by increasingthe ISOsensitivity. However,the image may be saturated in high luminance.The higher the ISOvalue, the higherthe camera's sensitivity to light isand therefore the greater its capacity to take pictures in dark conditions. However,the noise level inthe image will increase as the ISO value increases,making the imageappear coarse. 3. When you press the +/- button again,the value you set will be saved and ISOsetup mode will end. (29/

and DOWN buttons to select the white balance icon ( AWB). The white balance menu barwill appear as shown. 2. Use the LEFT and RIGHT buttons to set the white balance to the desired value. The value you set wil be displayedon the LCD monitor. AUTO AWB :The camera automatically selects the appropriate white balance settings, depending on the prevailing fightingconditions. DAYLIGHT ;_,,-'- : For taking imagesoutside. CLOUDY Ih, : For taking imagesunder a cloudy and overcast sky. FluorescentH _ :Forshootingunderdayfightfluorescenttypesofthree- way fluorescentlighting. FluorescentL _ : Shooting underwhite fluorescentlighting. TUNGSTEN @ : Forshootingundertungsten(standardfightbulb)lighting CUSTOM _m. : Allowsthe user to set the white balance according to the shooting condition. Differentlightingconditions may cause a colourcast on your images. 3. Pressthe + / - button again. Thevalue you set willbe saved and White Balance setup mode wifi end. • Usingthe Custom White Balance White balance settings mayvary slightlydepending on the shooting environment. You can select the most appropriate white balance setting for a givenshooting environment by setting upthe customwhite balance. 1. Select the CUSTOM ( _._ ) menu of the White Balance. 2. Place a sheet of white paper in front of the camera so that the LCD monitor shows only white, and then press the SHU]q-ER button. 3. Your custom white balance valueis stored. - The custom white balance value will be applied, starting with the nextpicture you take. - The user configured white balance willbe remain effectiveuntil it isoverwritten. T [Whitepaper] (30}

• Compensating Exposure 1. Pressthe +/- button,and then use the UP and DOWN buttons to selectthe exposure compensation icon ( [] ). The exposure compensation menu bar will appear as shown. 2. Usethe LEFT and RIGHT buttons to set the desired exposure compensation factor. 3. Pressthe +/- button again.The value you set will be saved and the Exposure Compensation setup mode will close. tfyou change the exposure value, the exposure indicator ( [] ) will be displayed on the bottomof the LCD monitor. ÷ A negative exposure compensation value reducesthe exposure. Notethat a positive exposurecompensation value increases theexposure and the LCD monitor willappear white or you may not getgood pictures. • You can use the menu on the LCD monitor to set up recording functions. The itemsindicated by are default settings. vTenutabMain menu Sub menu Cameraworkingmode Page MODE SET Program Movie Portrait Landscape Close up Dawn Night Children Text O_DQOnD DE_QQ_II_ Sunset Backlight Firework Beach&Snow 0_00000 BOOO_QO p.33 D MODE p.33 Full SIZE 2592X1944 r_O01]l_ p.34 (Still image) 1024X768 liilDgr_6Ea SIZE 320X240 n p.34 (Movie clip) (31 ]_

Dido ÷ Menus are subject to change without prior notice. 1. Turn on the camera and press the MENU button. A menu for each camera mode appears. However, there is no menu for Voice Recordingmode ( _ ). 2. Use the LEFT and RIGHT buttons to navigatethrough the menus. 3. Use the UP and DOWN buttons to select asub menu. 4. Select a sub menu, and then thevalue you set willbe saved. Pressthe MENU button and the menu willdisappear. {32_

• You can select the desired working mode usingthe M (Mode) button located on the back of the camera in the [MODE] menu. [STILL&MOVIE] :A still imagemode that was selected on the [MODE SET menu and movie clip mode can be selected. [FULL] :Auto, Program, Movie dip and scene modes can be selected. (33}

[STILL IMAGE moOd] [MOVIE CLIP mode] • You can selectthe compression ratio appropriatefor your applicationof the captured images. The higher the compression ratio,the lowerthe picture quality. {34} [STILL IMAGE mode] [MOVIE CLIP mode]

method to take brighter pictures. - Multi : Exposurewill be calculated based on an average of the available light inthe image area. However,the calculationwill be biased towards thecentre of the image area. This is suitabiefor general use. - Spot :Only the rectangular area inthe centre of the LCD monitor will be metered for light. This is the preferable setting whenyou want the subject in the centre of the image exposed correctly, regardlessof the back lighting. • Select the numberof pictures in continuous shooting. - Single :Take one picture only - Continuous :tmages will be taken continuously untitthe shutter button isreleased. The shooting capacity depends on the memory available. - AEB :Takethreepicturesin a ser_esin differentexposures:shortexposure (-O.5EV),standardexposure(0.OEV)and over exposure(+0.SEV). Use thismode if it ishard to decideexposureof the object ÷ Highresolution and picture quality increasesfile savingtime, which increases stand-by time. ÷ Iffewerthan3picturesareavailableinthememory,theAEBshootingisnotavailable. ÷ Itis best to usea tripod for the AEB shooting as the time to save each image file is longerand the blurring caused bycamera shake may occur. • You can adjust the sharpness of thepicture you are about to take. You cannot check thesharpness effect on the LCD monitor before you take a picture, because thisfunction is appliedonly when the captured imageis stored on the memory. - Soft :The edges of the image are softened. This effect is suitablefor editing images on your PC. -Normal :Tbe edges of the image are sharp. This is suitablefor printing. - Vivid :The edges of the image are emphasized. The edges wilI appear sharp, but noise may occur in the recorded image. {35_

RECORDING mode, you can check the recording status in the LCD monitor. • Idle mode : If you select the [LCD Save] and the camera isn't operated during the specified time(about30 SEC.),the camera power will be idle (LCD monitor :OFF, Camerastatus lamp :Blinking) automaficatly. - To usethe camera again,press any of the camera buttonsexcept the power button. - Ifthere isno operation duringthe specified time, the camera power willbe turned off automatically to save batterylife. Refer to page 54 for more informationabout the auto poweroff function. • Turn the camera on and select Play mode by pressingthe play mode button ( r_l ). Tile camera can now play back the images stored in the memory. • tf the memory card is insertedin the camera, all the camera functions apply only to the memory card. • tf the memory card is not insertedin the camera, all the camera functions apply only to the internal memory. • Playingback a still image 1. Setect the PLAY mode by pressing the play mode button ( r_l ). 2. The lastimage stored on the memory is displayedon the LCD monitor. 3. Select an image that you want to view by pressing the LEFT / RIGHT button. ÷ Press and hold the LEFT or RIGHT button to play back the images quickly. {36}

2. Pressthe play & pause button ( _ ) to play back a movie clip file. - To pause a movie clip file while playing it back, press the p)ay& pause button again. - Pressingthe play & pause button again will cause the movie clip file to restart. - To rewindthe movie clip while it isplaying, press the LEFT button. To fast forward the movie dip, press the RIGHT button. - To stop playback of the movie clip, press the play & pause button, and tben press the LEFT or RIGHT batten. R Movie clip capture function :capture still imagesfrom the movie dip. • How to capture the movie clip 1. Pressthe Play& Pause button while playing the movie clip. Then press the E button 2. The paused movie clip is saved in a new file name. The captured movie clip file has same size as the origins.[rnov{eclip (640)<480,320X240). [Paused] [Press the E button] On camera movie trimming : You can extract desiredframes of a movie clip during the movie clip play back. • if the funningtime isunder 10 seconds, the movie dip c_n't be trimmed. 1. Pressthe Pause button at the point of the movie clip that you want to start extracting. 2. Pressthe OK button. (Thestart point doesn't display on the status bar, bat the start point willbe marked.) 3. Press the Play & Pause button and the extracted range will be displayedon the status bar. 4. Press the Play & Pause button once more at the point where you wish the extracted fileto stop 5. Pressthe OK button and a confirmationwindow will be displayed. 6. Select adesired sab mena by pressing the Left / Right buttonand press the OK button. [Yes] :The extracted frames are saved asa new file name. [No] : The movie trimming will cancel. (37}

1. Select therecordedvoice that you want to play back by usingthe LEFT / RIGHT button. 2. Pressthe play & pause button ( _ ) to play back a recorded voice file. - To pause a recorded voice file, while playing it back, pressthe play & pause button again. - To resume playback of the voice file, press the play & pause button - To rewind the voice file while it is playing,press the LEFT button. To fast forward the voice file, press the RIGHT button. - To stop playback of the voice fite,press the play & pause button,and then press the LEFT or RIGHT button. • The LCD monitor displays shooting information about the displayedimage. Play mode -- Battery (p 10) -- Voice Memo (p40) -- Protect indicator -- (p46) DPOFindcarol(p48) Folder name and Stored image number • In Play mode, you can use the buttons on the camera to conveniently set up the Piay mode functions. • tf you have turned on the camera by pressing the POWER button, you can press the PLAY MODE button once to switchto Play mode and press it again to switch to Recordingmode. • You can turn the power on with the play mode button. The camera isturned on in play mode. Pressthe play mode button again to turn off the camera. {38_

Pressing the thumbnail button ( [] ) I1 Pressingthe enlargement button ( O.. ) Highlighted image [Thumbnail display mode] • Image enlargement 1. Select an imagethat you want to enlarge and press the enlargement button. 2. Different partsof the image can be viewed by pressing the 5 function button. 3. Pressing thethumbnail button willzoom back to the originalfutl sized image. - You can tell whether the image displayed isan [] enlarged view by checking the image enlargement indicator shownat the bottom left of the LCD monitor. (Ifthe imageis not an enlarged view, the indicatorwill not be displayed.) You can also check the area of enlargement. - Movie clips and WAV files can't be enlarged. - If an image is enlarged, a loss of quality may occur. • The maximum enlargement in proportion to the image size. Image size 3072x2304 2592x1944 2048x1536 1024x768 Maximum Xl0.0 X8.1 X6.4 X3.2 enlargement (39}

1. Select an image that you want to enlarge and press the enlargementbutton. 2. Differentparts of the imagecan be viewed by pressing the 5function button. 3. Pressthe MENU button and a message will be displayedas shown alongside. 4. Select a desired sub menu bypressing the UP / DOWN button and press the OK button. [Yes] :The trimmed imagewill save as a new file name, and display on the LCD monitor. [No] :The trimming menu will disappear. e If there is insufficientmemo17space to save the trimmed image the image can't be trimmed. ÷ To deletethe enlarged imageon the LCD monitor, press the deletebutton. • When the menu isdisplayed on the LCD monitor, the UPbutton operates as a direction button. • When the menu is notdisplayed on the LCD monitor,the UP button operates as the voice memo button.You can add your voice to a stored still image. • Adding a Voice Memo to aStiil image 1. Pressthe LEFT / RIGHT button to selectan imagethat you wish to add soundto. 2. Pressthe voice memo button ( _ ) and the voice memo indicator will display.The camera isnow ready to record avoice memo. 3. Pressthe shutter button to start recording and voice willbe recordedto the still imagefor 10 seconds. While thevoice is recording,the recording status window will be displayed as shownalongside. The recording can be stopped by pressingthe shutterbutton again. 4. The ( I1_) icon wilt be displayedon the LCD monitor after voice memo recording has finished. - The voice memo will be saved in *.wav format, but has the same file name asthe still image to which it corresponds. - If you add a new voice memo to the still imagethat already has a voice memo, the existingvoice memo will be erased. (40_

- LEFT button : While the menu is showing,the LEFT button operatesas a direction button.While the menu is not showing, press the LEFT button to select the previous image. - RIGHT button : While the menu is showing,the RIGHT button operatesas a direction button.While the menu is not showing, press the RIGHT button to select the nextimage. - MENU button : When you pressthe MENU button,the play mode menu will be displayed on the LCD monitor. Pressingit again will return the LCD to the initialdisplay. - OK button : When the menu is displayedon the LCD monitor,the OK button is used for confirmingdata that is changed by using the 5 function button. • Thisdeletes images stored on the memory card. 1. Select an imagethat you want to deleteby pressing the LEFT / RIGHT button and press the DELETE ( t_ ) button. 2. Select the sub menu values by pressingthe Left / Right button and then press the OK button. If [Yes] is selected :deletes the selectedimages. tf [No] is selected :cancets "Delete Image". (41}

mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY mode button or shutterbutton. Menu tab Main menu SLIDE OSD INFORMATION ROTATE [] RESlZE Sub menu Show interval Effect Music Full Basic OSD Off Right 90° Left 90° 180° Horizontal Vertical 2592X1944 2048X1536 1024X768 User Image 1,2 Secondary menu Page Play,Repeat Play 1,3,& 10sec Off p.44 Off Music1,2,3 p.45 p.45 pA6 Menutab Main menu [] PROTECT m DELETE COPYTO CARD DPOF Sub menu Select All Pics Select All Pics No Yes Standard Index Size Secondary menu Page Unlock/Lock p.46 p.47 p.47 SelectJAll%s/Cancel No/Yes p.48~49 Select/All%s/Cancel {42}

p.5t p.5t p.5t p52 (43/

slide show by connecting the camera to an external monitor. 1. Selectthe [Show] sub menu by pressing the UP / DOWN button and press the RIGHT button. 2. Use the Up / Down buttons to selectthe desired sub menu. [Play] selected : The slide show is closed after one cycle. [Repeat Play] selected : The slide show is repeated until cancelled. 3. Press theOK button to start the slideshow. - Press the Pause button to pausethe slide show. - Press the Pause button ( _ ) again to resume the slideshow. - To stop the slideshow, press the play & pausebutton, and then press the LEFT or RIGHT button. • Setting play interval : Set the slide show play interval. 1. Selectthe [Interval] sub menu by pressing the UP / DOWN button and press the RIGHT button. 2. Use the Up / Down buttons to selectthe desired interval. 3. Press theOK button to save the configuration. • Configure slide show effects : Unique screen effects can be used for the slide show. 1. Select the [Effect] sub menu by pressing the UP / DOWN button and press the RIGHTbutton. 2. Use the Up / Down Buttonto select the type of effect. I_ : Normal display. Ell : image is displayedslowly. : Image is displayedslowly from the centre outwards. G_ : image moves from thetop left. : The image slidesdiagonally from top teftto bottom right. I_1 : The image slidesirregularly. 3. Press theOK button to confirm the setting. • Setting the Music :Three types of music can be used for theslide show. 1. Select the [Music] sub menu by pressingthe UP / DOWN button and press the RIGHT button. 2. Use the Up / Down Buttonto select the type of music. (Off, Music I~3) 3. Press theOK button to confirm the setting. {44_

[Full] [Basic] [OSD Off] • You can rotate the storedimages by various degrees.Once the playback of the rotated picture isfinished, it will switch back to the original state. 1. Select adesired sub menu by pressing the UP/ DOWN button. Aperture value Shutter speed ISOvalue Recordingdate [BeforeIotating themage] ]Right 90°] [Left 90°] [180°] [Honzontal] [Vertical] 2. Pressthe OK button and the rotated imagewill be displayed. Ifyou display the rotated imageon the LODmonitor, emptyspaces may appear to the left and right of the image. (45}

an imageto be the start-upimage. The resized image wilthave a new file name. 1. Select a desired sub menu bypressing the UP / DOWN button and press the OK button. • Image ResizeTypes Resize 2592X1944 7M O 5M X 3M X 1M X 2048X1536 1024X768 User Image 1,2 O O O O O O X O O X X O • A large sized imagecan be resizedto a smallersized image, but notvice versa. • OnlyJPEG images can be resized. Movie clip (AVt), Voice recording (WAV) flies can't be resized. • You can change the resolution of only those files compressed in the JPEG 4:2:2 format. • The resizedimage will have a new file name. The [User Image]image is stored noton the memory card but on the internal memory. • Onlytwo [User Image]images can be saved. • Ifthe memory capacity is insufficientto store the resizedimage, the resized imagewill not be stored. • This is used to protectspecific shots from being acddentaily erased (Lock). It also unprotects images that have been previously protected (Unlock). • Protecting tmages 1. Select a desired sub menu by pressing the UP / DOWN button and press the OK button. [Select] : Selectionwindow for an imageto be protected / released isdisplayed. - Up / Down/ Left / Right : Select an image - Zoom W / T Button : Protect / release the image - OK Button : Your changes wilt be saved and the menu willdisappear. rAilPics] : Protect/release all saved images - Zoom W / T Button :Protect/ releasethe images - OK Button : Your changes wilt be saved and the menu willdisappear. - Ifyou protectan image, the protecticon willbe displayedon the LCD monitor. (An unprotected imagehas no indicator) - An image in LOCK mode will be protected from the deletefunction, but will NOT be protected from the format function. {46}

subfolderwill be deleted. Remember that this will permanently delete unprotectedimages. Importantshots should be stored on acomputer before deletiontakes place. The startupimage and SKIN image are stored in the camera'sinternal memory (i.e., noton the memory card) and it will notbe deleted even if you deleteall files on the memory card. • Deleting images 1. Selecta desired sub menu by pressing the UP/ DOWN button and press the OK button. [Select] : Selection window for an image to delete is displayed. - Up/ Down / Left / Right : Select an image - Zoom T Button : Selectthe image for deletion. (V mark) - OK Button : Pressthe OK Buttonto display the confirmationmessage. Selectthe [Yes] menu and press the OK buttonto delete marked images. [Atl Pies]: Displays confirmationwindow. Select the [Yes] menu and press the OK button to delete all unprotected images. Ifthere aren't protected images, alt the imagesare deleted and a [No tmage!] messagewill display. 2. After deletion, the screen will be changed to the play mode screen. • This enables you to copy imagefiles, movie clips and voice recording files on the camera'sbuilt-in internal memory to the camera's removable SD memory card. • Copying to the Memory Card 1. Select adesired sub menu by pressing the UP/ DOWN button and press the OK button. -[No] : Cancels "Copyto Card". - [Yes] : All images, movie clips and voice recording files saved in the internal memory are copied to the memory card after the [Processing!]message is displayed. After copying has been completed,the screen will return to play mode. (47}

your memoir/card's MISC folder. Select the pictures to be printedand how many prints to make. • The DPOF indicator will displayon the LCD monitor when an imagethat has DPOF informationplays back. Imagescan then be printedon DPOF printers or at an increasingnumber of photo labs. • This function is not availablefor Movie clips and Voice recording ties. • If a memory card is not inserted,the menus are still displayedin the LCD, butare not selectable. • Images (except for movie clips and voice file) are printed as indextype. 1. Setect the [Index] menu bypressing the UP / DOWN button and press the RIGHTbutton. 2. Select a desired sub menu by pressing the UP / DOWN button. If[No] isselected : Cancelthe index print setting. If[Yes] isselected :The imagewill be printed in indexformat. 3. Press theOK button to confirm the setting. • This function allows you to embed print quantity information on a stored image. 1. Selectthe [Standard] menu by pressing the UP / DOWN button and press the RIGHT button. 2. Select a desired sub menu bypressing the UP / DOWN button. [Select] : Selectionwindow for an imageto print is displayed. - Up / Down/ Left / Right :Select an imageto print. - Zoom W / T Button : Selectthe number of prints. [All Pics]: Configure numberof prints for aft pictures except movie and voice files. - W / T button : Select a numberof prints [Cancel] : Cancel the printsetup. 3. Pressthe OK button to confirm the setting. Ifan imagecarries DPOF instructions, the DPOF indicator ( _ ) wifl show. _48}

2. Selecta desired sub menu by pressing the UP/ DOWN button and press the OK button. [Select] : Selection window for an image to be changed printedsize is displayed. - Up/ Down / Left / Right : Select an image. - Zoom W / T Button : Change the printsize. - OK button : Your changes will be saved and the menu will disappear. [All Pics]: Change print sizeof all saved images. - W / T button :Select a print size - OK button : Confirm the changed setting. [Cancel] :Cancel all of the print size settings. ÷ DPOF [Size] secondary menu : Cancel, 3X5,4X6, 5X7, 8Xl 0 ÷ Depending on the manufacturer and printer model, cancellingthe printing may takea littlelonger for the printer to process. • You can use the USB cable to connect this camera to a printer that supports PictBridge(sold separately) and printthe stored imagesdirectly. Movie clips and voice flies cannot be printed. • Setting up the camera for connection with the printer 1. In any mode withthe exceptionof Voice Recording mode, pressthe MENU button. 2. Pressthe LEFT / RIGHT button and select [SETUP] menu tab. 3. Select [USB] menu by pressing the UP / DOWN button and press the RIGHT button. 4. Select [Printer]menu by pressing the UP/ DOWN button and press the OK button. ÷ Ifyou selected[COMPUTER] in Step5, when you connect the camera to your printer,the [USB ERROR!] message will displayand the connection will not be established, tn this case,disconnect the USB cable, and then followthe procedure from Step2 onwards. (49}

setup menu, [Connecting Computer] message wilI display when you connect the camera to your printer and theconnection wiltnot be established. In this case, press the Printer button.[Connecting Printer] messagewill display and the Easy printing mode willbe selected. * In some instancesthe camera may notconnect to the printer,this will depend on the manufacturer of the printer. • Easy printing When you connect the camera to printer in the Play back mode, you can print a picture easily. - Pressingthe Printer ( _ ) button : The currently displayedimage will be printedwith the printer'sdefault setting. - Pressingthe Left / Right button : Selects a previous/ next image. • Select pictures to print 1. Press the Menu button. 2. The [Images[ menu willappear. 3. Usethe UP and DOWN buttonsto selectthe desired submenuvalue, and thenpress the OKbutton. When [One Pic] isselected : The PictBridge function will be appliedonly to the picture currently displayed. When jAil Pics] isselected : The PictBridge function wilt be appliedto all pictures, excluding movie clips and voice files. _5o_ • Setting the Number of Copies to Print - Select [One Pic] or jAil Pics]. A screen where you can set the numberof copies to print will appear as shown below. [When [One Pic] is selected] [When [AllPies] is selected] - Press the Up / Down button to select the number of prints. - When [One Pic] is selected : Use the Left / Right button to select another picture.After selecting another picture, selectthe numberof prints for another picture. - After setting the numberof prints, pressthe OK buttonto save. - Press the Shutterbutton to returnto the menu without settingthe number of prints. • AUTO SET 1. Use the LEFT and RIGHT buttons to select the [AUTO SET] menu tab. 2. Use the UP and DOWN buttons to selectthe desired submenu value, and then press the OK button. [No] :[CUSTOM SETJvalues are kept. [Yes] :Atl values in the [CUSTOM SET] are automatically changed.

the printing and the [Images] menu is displayed. ÷ Number of pictures on an indexprint varies depends on the printer used. • DPOF Print: This allowsyou to directly print the files with DPOF information. 1. Use the LEFT and RIGHT buttonsto select the [DPOF PRIN]] menu tab. 2. Use the UPand DOWN buttons to select the desired submenu value, and then press theOK button. [No] :Cancel the printing [Yes] :Directly print the file with the DPOF information ÷ Depending on the manufacturer and printer model, some menus may not be available.When a printer does not support the DPOF, the menu is still displayedbut not available. {51}

1. Use the LEFT and RIGHT buttons to select the [RESET menu tab. 2. Use theUP and DOWN buttonsto select thedesired submenuvalue, and then press theOK button. if [No] isselected :Settings will notbe reset. if [Yes] is selected :All print and image settings will be reset. Default print setting varies depending on the printer manufacturer. For your printer'sdefault setting,referto the user's guide that came with your printer. <52_ g Inthis mode, you can set up bash settings.You can use the setup menu in all camera modes except Voice Recording mode. The items indicated by are default settings. Menu tab Main menu Sub menu Secondary menu Page File Reset p.53 Power Off Off, 1,3, 5,10rain p.54 ENGLISH _-o1 FRAN_AIS DEUTSCH ESPAi_IOL ITAUANO _I_ _@€3_ PYCCKHR Language PORTUGUES DUTCH DANSK p.54 SVENSKA SUOMI "[_4,u BAHASA _._ _e_tina POLSKI Magyar TOrk_e No Format .............................................................................................. Yes p.54 07/02/01 13:00 Date&Time mm/dd/yy p.55 dd/mm/yy Off Guam World Time p.55 Sydney imprint Date p.55 Date&Time Off AF lamp p.55

Page p.55 p.55 p56 p.56 p.56 p.56 • Thisfunction allowsthe user to select the file naming format. [Series] : New files are named usingnumbers that followthe previous sequence, even when a new memory card is used, orafter formatting,or after deleting all pictures. [Reset] : After using the resetfunction, the nextfile name willbe set from 0001 even after formatting,deleting all or insertinga new memory card. (53}

unnecessary battery drainage. [Off] : The poweroff function will not operate. [1,3,5,10min] : The powerwilttum off automatically if not used for the period of time specified. • This is used for formatting the memory. If you run [Format[ on the memory,all images, includingthe protected images, will be deleted. Be sure to download important imagesto your PC before formattingthe memory. If[No] isselected : The memory card will not be formatted. Pressthe menu button twice and the menu display wiltdisappear. If[Yes] is selected : A [Processing!] message appears and the memory card will be formatted. If you ran FORMAT in Play mode, a[No Image!] messagewilt appear. • There is a choice of languages that can be displayedon the LCD monitor. Even if the battery and AC charger are removed and inserted again,the language setting willbe preserved. LANGUAGE sub menu : English,Korean, French,German, Spanish, Italian, S.Ohinese, T.Ohinese, Russian,Portuguese, Dutch, Danish,Swedish, Finnish, Thai, BAHASA (MALAY/ INDONESIAN[, Arabic, Czech, Polish, Hungarian and Turkish. {54}

and set up thedate type. RIGHT button : Selects theyear / month / day / hour / minute date type. LEFT button : Moves tbe cursor to tbe [Date&Time] main menu if the cursor is at the first item of the date and time setup. In all other cases,the cursor will be shifted to the left of its current position. UP and DOWN buttons :Changes the settingvalue. • You can turn the Auto Focuslamp on or off. If [OffJisselected : TheAF lamp will not light up. If [On] isselected : TheAF lamp will light up. ÷ Ifyou select [Oft]menu and take an image in poorly litconditions or select the [Night] scene mode, the camera may not be able to focus accurately. ÷ The Auto Focuslamp willfunction while usingthe self-timer even if the configurationis set to off. • This menu enables you to display the localdate and time on the LCD monitor. • Ifyou set theoperation sound to on, various sounds will be activated for camera start-up and when buttons are pressed, so that you are awareof the camera'soperation status. • There is an optionto include DATE / TIME on still images. [Oft] : The DATE & TIME wiltnot be imprintedon the image file. [Date] : OnlytheDATEwillbeimprintedontheimagefile. [Date&Time] :TheDATE&TIMEwillbeimprinted ontheimagefile ÷ The Date & Time are imprinted at the bottom right side of the still image. ÷ The imprintfunction is appliedonly to stitl images except for the images taken in the [Text] scene mode and photo frame effect mode. • You can select an external deviceto which you want to connect the camera usingthe USB cable. [Computer] : Select this if you want to connect the camera to your PC. Referto page 66 for instructions on how to connect the camera to your PC. [Printer] : Select this if you want to connect the camera to your printer. Refer to page 49 for instructionson how to connect the camera to your printer. (55:_

• The Movie output signal from the camera can be NTSC orPAL. Your choice of output will be governed bythe type of device (monitoror TV, etc.) to which the camera is connected.PAL mode can support only BDGHI. Yellow - Video {56_ • tfyou enable QuickView before cap uringan image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quickview is possible only with still images. [Oft] :Tire quick view function cant be activated. [0.5, 1,3sec] :The captured image isbriefly displayed during theselected time. • Artcamera menu and function settingswill be restored to their default values. However,values for DATE / TIME, LANGUAGE, and VIDEO OUT will not be changed. If[No] is selected :Settings will not be restored to their defaults. If[Yes] is selected :AIt settingswill be restoredto their defaults.

the MyCAM menu. The itemsindicated by are default settings. Menu tab Main menu Start Image 0 Start Sound Shutter Sound Sub menu LOGO User Image 1 User Image 2 Sound1 Sound2 Sound3 o_ Sound2 Sound3 Page F57 p.57 p.57 ÷ Menus are subject to change without prior notice. • You can select the soundthat is activated whenever the camera isturned on. • You can select the imagethat is first displayedon the LCD monitor whenever the camera is turned on. • You can select the shuttersound. (57}

• This unit containsprecision electronic components. Do not use or store thisunit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlightor the inside of a vehicle in hot weather. - Environments where there is highmagnetism or excessivevibration. - Areas with high explosives or highly flammable materials. • Do not leavethis camera in places subject to dust, chemicals (like naphthalene and mcthball), hightemperature and high humidity. Keep this camera with silicagel in a hermetically sealed box when not planning to usethe camera for a long period of time • Sand can be particularly troublesome to cameras. - De not letsand get inside thecamera when using it on beaches, coastal dunes, or other areas where there is lotsof sand. - Doing so may result in failureor may permanently render thecamera unusable. • Handling the camera - Never drop the camera or subject it to severe shocks or vibrations. - Protect the largesize LCD monitor from an impact. When this camera is not being used, keep it in the camera case. - Avoid obstructing the lens orthe flash when you capture an image. - This camera is notwaterproof. To avoid dangerous electricalshocks, never holdor operatethe camera with wet hands. - If you use thiscamera in wet places, such as beach or pool, do not let water or sand get inside the camera. Doing an may result in failureor may permanently damage the unit. {58} Extremesin temperature may cause problems. - Ifthe cameraistransferredfrom a cold to awarm and humidenvironment, condensationcanform onthe de]bateelectroniccircuitry.Ifthisoccurs,turnthe cameraoff andwait for at least 1hour untilaltmoistureisdispersed.Moisturebuilt up cana]sc occurin thememorycard.Ifthishappens,turnoffthe cameraand removethememorycard.Wait unfilthe moisturehasdispersed. Caution on Usingthe Lens - Ifthe lens is subjectedto direct sunlight,it couldresult in discoloration and deteriorationof the imagesensor. - Pay attention notto get fingerprintsor foreign substanceson the surfaceof the lens. Ifthe digitalcameraisnot usedfor a longperiod,an etectncdischargecanoccur. tt is agood idea to remove the batteryand the memory card if you do not intend to use thecamera for an extended period of time. If thecamera is exposed to an electronicinterference, it willturn itself offto protectthe memory card. Camera Maintenance - Use a soft brush (available from photo stores)to gently clean the lens and LCD assemblies. tfthis does notwork, lens-cleaning paperwith lens cleaningfluid can be used. Clean the camera body with a soft cloth.Do notallow this camera to come into contactwith solvent materielssuch asbenzol, insecticide,thinners etc. This maydamage the body shell of the camera and also affect its performance. Rough handling can damage the LCD monitor. Take care to avoid damage and keep the camera in its protective carrycase at all times when not in use. Do notattempt to disassemble ormodify the camera.

Insert a new memory card Delete unnecessary imagefiles to free up some memory No tmageE • There are no images storedon the memory Take images Insert a memory card that isholding some images File Error! • Fileerror Format the memory card • Memory card error Contact a camera service centre Low Battery! • There is low battery capacity Insert fresh batteries. • There are severalwarnings that may appear on the LCD display Card Error! • Memory card error Turn off the camera power and turn it on again tnsert the memory card again Insert the memory card and format the memory card. (p.54) Low Light! • When taking pictures in dark places Take pictures in Flash Photography mode. Out Of Number • When selectingtoo many printing pages in the PictBtidge menu. Select printing pagewithin the limitation. Card Locked! •The memory card islocked SD memory card : Slidethe write protect switchto thetop of the memorycard (59_

• There is low battery capacity Insert fresh batteries.(p.f O) • The battery maybe insertedincorrectly. Insert the batteryaccording to the polaritymarks (+ -) • The battery isnot inserted Insert the batteryand turn on the camera The camera power ceases while in use • The batteryare exhausted Insert charged battery • The Camera isturned off automatically Tum on the camera power again. Battery power quicklydrains • The Camera is being used in low temperatures Keep the camera in warm conditions O.e.inside a coator jacket) and only remove it in order to take images Camera does not take imageswhen pressing the Shutter button • There is insufficientmemory capacity Deleteunnecessary imagefiles • The memory card has notbeen formatted Format the memory card (p.54) • The memory card is exhausted Insert a new memory card • The memory card is locked Refer to [Card Locked!] error message • The camera's poweris off Turn the camera poweron (60_ • Thebattery is exhausted Insert fresh batteries. • Battery is insetted incorrectlywith the polarities reversed Insert the battery according to the polarity marks (+ -) The camera suddenly stops working while in use •The camera stopped due to a malfunction Remove/re-insert batteryand switch the camera on The images are unclear • A picture was taken without setting an appropriate macro mode Select an appropriate macro mode to take a clear image. •The picture was taken with the subject beyond the flash range Take a picture within theflash range • The lens is smudged or dirty Clean the lens The flash does notfire • Flashoff mode hasbeen selected Dis-engage flash off mode •The camera mode can't use theflash Refer to the FLASH instruction(p.22~24) Incorrectdate and time isdisplayed • Thedate and time have beenset incorrectlyor thecamera has adopted the default settings Reset the date and time correctly The camera buttons do not operate • Camera malfunction Remove / re-insert battery and switch the camera on A card error has occurred while the memory card is in the camera. • Incorrectmemory card format Re-format the memory card

• Incorrectfile name (Violation of DCFformat) Do not change the imagefile name Celour of imageis different to the originalscene • White balance or effect setting is incorrect Select appropriateWhite balance and effect Images are too bright • Exposure isexcessive Reset exposure compensation No image on external monitor • The external monitor has not beenconnected properlywith the camera Check the connection cables • There are incorrectflies inthe memory card insert a memory card that has correctflies When using the PCs explorer the [Removable Disk]file does notshow • Cable connection isincorrect Check the connection • The camera isoff Turn the camera on • The operating system isnot Windows 98, 98SE, 2000, ME XP/Mac OS 10.0 10.3. Alternativelythe PC does notsupport UBB. InstallWindows 98, 98SE, 2000, ME XP/Mac OS 10.0 ~ 10.3 to PC that supports USB. • The camera driver isnot installed Installa [USB Storage Driver) Image Sensor - Type : 1/2.5"COD - Effective Pixel : Approx. 7.2Mega-#xel - Total Pixel : Approx. 7.4 Mega-pixel Lens - Focal Length : NV Lens f = 5.8 _ 17.4mm (35mm equivalent: 35 ~ 105mm) -FNo. : F2.8 ~ F4.9 - DigitalZoom : •Still Image mode : 1.0X_ 5.0X - Play mode : 1.0X ~ 10.0X (depends on imagesize) LCD Monitor : 2.5" color TFT LCD (230,000pixel) • Focusing - Type :qq-L contrastauto focus - Range Normal Macro Auto Macro 5~80cm 5cm~infinity I Tele 80cm ~ infinity 40-,,80cm 40cm~infinity • Shutter - Speed : 1~ 1/2,000 sec. (Night Mode : 15~ 1/2,000 sec.) • Exposure - Controt : Program AE Metering : Multi,Spot - Compensation : _+2EV(0.5 EV steps) - tSO Equivalent : Auto, 50, 100, 200, 400, 800, 1600 • Flash - Modes :Auto, Auto& Red-eye reduction, Flit-inflash,Stow sync, Flashoff - Range : Wide :0.4 ~ 3.0m, Tele : 0.5 _ 2.5m (ISO AUTO) - RechargingTime :Approx. 4.0sec • Sharpness : Soft, Normal, Vivid • Effect :Color, B&W, Sepia, Red, Green, Blue, Negative, RGB, Highlight • White Balance : Auto, Daylight,Cbudy, FluorescentH, FiuorescentL, Tungsten, Custom (61}

- File Format :Stilt Image :JPEG (DDF), EXIF22, DPOF 1.1 PictBridge 1.0 Movie Clip : AVl (MPEG-4) Audio :WAV - Image Size 7M 5M 3M 1M 3072x2304 2592x1944 2048x1536 1024x768 {62} t - Oapacity (256MB MMD) I " - -i 7M 5M sM iM Superfine [ 76 93 173 560 Fine i 113 159 266 673 Normal i 193 272 425 743 ÷ These figures are measured under Samsung's standardconditions and may vary depending on shootingconditions and camera settings. g Image Play - Type : Single image, Thumbnails, Slide show, Movie Clip - Editing : Trimming, Rotating, Resizing, Oolour Effect g Interface: Digital output connector : USB2.0 (Mass Storage Olass) VideoOut : Pal & NTSCselectable Audio : Mene (without external codec) Pictbridge (FullOption) g Power Source : Rechargeablebattery : 3.7V U-ionbattery (SLB-0837) ÷ Included battery mayvary depending on sales region• g Dimensions(WxHxD) : 96.9 X 56.8 X 20•5mm g Weight: 130g - OperatingTemperature :0 _ 400C - Operating Humidity : 5~ 85% g Software - Camera Driver : StorageDriver(Windows98/ 98SE/ 2K/ ME/ XP,MacOS10,0_ 10.3) - Application : Digimax Master g Special Features - 3X Optical Zoomfor Still & Movie• MPEG-4 VGA 30 fps Movie Slip (supporting Edit on DSC), EffectKey Powerful Effect(Oolour, HigHight) Easy Mode Ohange using 'M" button ÷ Specifications are subject to change without prior notice. ÷ Afttrademarks are the property of their respective owners•

inappropriate use. • Using a Hand-made PCor a PC and OS that has notbeen guaranteed by the manufacturer is notcovered by the Samsungwarranty, • Before reading this manuel, you should have abasic knowledge of computers and O/S (OperatingSystems), For Windows For Macintosh PCwlillprocessorbetIerthanPent_um I1450MHz Power Mac G3 or later (Pentium 700MHz recommended) Windows 98 / 98SE / 2000 / ME / XP Mac OS 10.0~ 10.3 Minimum64MB RAM Minimum 64MB RAM 200MB of available hard disk space 110MB of availablehard-disk space USB port USB port CD-ROM drive CD-ROM drive 1024x768pixels, 16bitcolour display MRayer compatble monitor DivX (For movie clip) (24bit colour display recommended) After insertingthe CD-ROM provided with this camera intothe CD-ROM drive,the followingwindow should automatically run. Before connecting the camera to the PC, you shouldfirst installthe camera driver. • Camera driver : This enables images to transferbetween the camera and PC. This camera uses the USBStorage Driver as thecamera driver. You can use the camera as a USB card reader. After installingthe driver and connecting this camera to the PC, you canfind [Removable Disk] in [Windows Explorer]or [My Computer]. A USB Storage Driver is provided only for Windows. A USB Driver for MAC isnot included withthe Application CD. You can use the camera with Mac OS 10.0~ 10.3. • Digimax Master : This is the all-in-onemulti media software solution. You can download, view, edit and save your digital imagesand movie clips clip with this software.This software is only compatible with Windows. (63}

After this has been done, the stored images in the camera can be moved to the PC and can be edited byan imageediting program. • You can visit the Samsung web-sitethrough the internet. http://_,_.sam sungcamera.corn :English http://www.samsungcamera.ce.kr : Korean 1. The auto run frame willdisplay. Click the [install] menu inthe Auto run frame. 2. Installthe camera driver, DirectX,Xvid and Digimax Master byselecting a button shown on the monitor. Ifan upperversion of DirectXwas installedon your computer, DirectX may netbe installed. _64_ e The XviD codec isdistributed according to and under the terms and conditions of the GNU General PublicUcense and everyone can copy, modifiy and distribute this cedec freely, butWITHOUT ANY WARRANTY, IMPLIED OR EXPRESSED, OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE; provided, however,that you have to followthe GNU General Public License whenever you are distributing thiscodec or modification thereof. For more information seethe GNU General PubliceLicense documents (http://v,_,w.gnu.org/copyleft/gpl.html).

3.After restarting thecomputer, connect thePCtothecamera withtheUSB cable. 4.Turn thecamera power on. The[Found New Hardware Wizard] will open andthecomputer willrecognise the camera. ÷Ifyour OSisWindows XP,animage viewer program willopen. Ifthedownload window ofDigmax Master opens after starting Digimax Master, thecamera driver wassetup successfully. _65_

[SETUP] menu tab. 3. Selectthe [USB] menu by pressing the UP / DOWN button and press the RIGHT button. 4. Use the UP and DOWN buttons to select [Computer],and then press the OK button. 5. Pressthe menu button twice and the menu will disappear. 6. Connectthe PCto thecamera with the USB cable. • Connectingthe camera to a PC ÷ If you selected [Printer] in Step4, when you connect the camera to your printer, the [Connecting Printer]message wilt display and the connection will not be established. in this case, disconnect the USB cable, and then follow the procedure from Step 2 and onward. • Disconnecting the camera and PC : Refer to page 68 (Removing the removable disk). {66_

mouse button. - By using [DigimaxMaster], you can see the stored images inthe memory directly on the PC monitor and you can copy or move the imagefiles. 4. A pop-up menu wiltopen. Click the [Cut] or [Copy] menu. - [Cut] : cuts a selected file. -[Copy[ : copiesfiles. 5. Click a folder where you want to paste the file. {67}

Ifthe camera status lamp blinks, please wait until the lamp has finished blinkingand isconstantly on. 2. Unplug the USB cable. • Windows 2000 / ME / XP (Tile illustrations maydiffer from those showndepending on the Windows O/S.) 1. Check whether the camera and PC are transferringa file. Ifthe camera status lamp blinks, please wait untiIthe lamp has finished blinkingand isconstantly on. 2. Double-clickthe [Unplug or Eject Hardware] icon 3_ on the task bar. [Doub]e-click!] 3. The ]Unplug or EjectHardware] window will open. Select the [USB Mass Storage Device] and click the ]Stop] button. 4. The [Stop a Hardware device] window will open. Select the [USB Mass Storage Device] and click the [OK] button. 6. A [Unplug or EjectHardware] window will open. Click the [Close] button and the removable disk willbe removed safely. 7. Unplug the USBcable. 1. A USB Driver for MAC is not includedwith the software CD as MAC OS supports the camera driver. 2. Check the MAC OS versionduring start-up. This camera is compatible with MAC OS 10.0_ 10.3. 3. Connect thecamera to the Macintosh and turn the camera power on. 4. A new icon will be displayed on the desktop after connecting the camera to the MAC. 1. Double click a new icon on the desktop and the folder in the memory wilt be displayed. 2. Select an image file and copy or move it to MAC. 5. A [Safe to Remove Hardware] window will open. Click the [OK] button. {68_

Properties. ® 6. Uninstallationis complete. • You can download, view, edit and save your imagesand movies with this software.This software isonly compatible with Windows except for the Windows98. • To start the program click [Start _ Programs _ Samsung _ Digimax Master Digimax Master]. • Downloading images 1. Connectthe camera to your PC. 2. A window for downbading imageswill display after connecting the camera to your PC. - To download the captured images, select the [Select AIt]button. - Select desired folder inthe window and click the [Select All]button. You can save captured images and selected bider. - Ifyou click the [Cancel] button, downloadingwill be cancelled. 3. Click[Next >] button. _[69}

and images will be downloaded. - Folder name willbe made as you want and images willbe downloaded. - After selectinga folder that was made before, imageswill be downloaded. 5. Click [Next >] button. 6. A window willopen as shown alongside. The destination of the selectedfolder will be displayedon the upper side of the window. Click the [Start] button to download the images. 7. Downloaded imageswill be displayed. • Imageviewer :You can view the stored images. - Image viewer functions are listed below. ¢1)Menu bar : You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. ¢2_Image selectionwindow : You can select the desired images in thiswindow. (_ Media type selection menu :You can select imageviewer, imageedit and movie edit functions in this menu. (4)Preview window : You can preview an image or a movie clip and check the multi media information. @ Zoom bar :You can change preview size. ¢6)Folder displaywindow : You can seethe folder location of the selected image. (_7)Image display window : Images of the selected folder are displayed. Referto the [Help] menu in Digimax Master for further information. {70_

• Movie edit :You can get thestill image, movie clip, narration,music flies together in amovie clip. - Image editfunctions are listed below. _) Editmenu : You can selectthe following menus. [Tools] : You can resize or cropthe selected image. Seethe [Help] menu. [Adjust] : You can modify imagequality. See the[Help] menu. [Retouch] : You can change imageor insert effects on the image. Seethe [Help] menu. (2)Drawing tools : Tools for editing an image. C3)image display window :A selected imagedisplays in this window. _) Previewwindow : You can previewthe changed image. ÷ A still image editedwith Digimax Mastercan't be played back on the camera. ÷ Referto the [Help] menu in Digimax Masterfor further information. - Movie clip edit functions are listed below. d) Editmenu : You can select the followingmenus. [Add Media] : You can add other mediaelements to a movie. [Edit Clip] : You can change the brightness,contrast, colour and saturation. [Effects] : You can insert an effect. [Set Text] : You can insert texts. [Narrate] : You can insert a narration. [Produce] : You can save the edited multi mediaas a new file name. You can select AVl, Windows media(wmv), Windows media (asf) and movie clip for this camera (avi,MPEG-4) file types. (2)Frame displaywindow :You can insert multi mediain this window. ÷ Some movie clips that were compressedwith acodec that isnot compatible with the Digimax Mastercan't play back in the Digimax Master. ÷ Refer to the [Help] menu in Digimax Masterfor furtherinformation. (71_

1. Select a movie for playing back on the camera by pressing the [Add] button. Insetteffect_and editthe movie.To savethe editedmovie,pressthe[Make]button. 2. Select [Movie for camera] video type. t: 3. Select Cameraoption, Output location,File name and press the [Make] button. - Frame size : Selectingthe width and height of the frame. - Frame rate : Selectingthe frame rate per second. - File location : Selectinga location where the editedmovie is saved. - File name :To play backthe movie on the camera, you must keep the DCF rule. Savethe movie as SL27XXXX.avi (You can input any numbersbetween 0001~ 9999 insteadof XXXX letters). 4. Connectthe camera to the computer with the included USBcable. 5. Copy the edited movie to [Removable DIek©CIM_XXXSSCAM]. (You can input any numbers between 100 ~ 999 insteadof XXX letters) 6. You can play back the movie in the Play mode of the camera. • Pleasecheck the followingif the USBconnection malfunctions. :1' USBcable is not connected or it is notthe supplied USB cable. ..... _ Connectthe supplied USB cable. The camera is not recognisedby your PC. Sometimes,the camera may appear under [Unknown Devices] in DeviceManager. Installthe camera driver correctly. Turn off the camera, remove the USBcable, plugin the USBcable again,and then turnon the camera. There isan unexpected error during file transfer. _ Turn the camera power off and on again. Transferthe file again. When usingthe USBhub. There may be a problem in connecting the camera to the PCthrough the USBhub if the PC and the hub are not compatible. Wherever possible,connect thecamera to the PC directly. C8se_ Areother USB cables connected to the PC? .... _ The camera may malfunction when it is connectedto the PC at the same time asanother USB cable. Inthis case, disconnect the other USBcable, and connect only one USB cableto the camera. {72}

Control Panel _ (Performance and Maintenance)_ System (Hardware) _ Device Manager),there are Unknown Devices or Other Devices entries with a yellow question mark(?) beside themor devices with an exclamation mark(!) beside them. Right-click on theentry with the question (?) or exclamation (0 mark and select"Remove". Restartthe PCand connect the camera again. For Windows 98 PC remove the camera driver also, restart the PC, and then reinstallthe camera driver. In some securityprograms (Norton AntiVirus, V3, etc.), the computer may not recognise the camera as a removable disk. Stop the sacurity programsand connect the camera to the computer. Referto the security program instructionsabout how to temporarily disable the program. The camera isconnected to the USBport located on the front of the computer. When the camera isconnected to the USB port locatedon the front of the computer, thecomputer may not recognisa the camera. Connect the camera to the USB portlocated on the back of the computer. • When the movie clip doesn'tplay back on the PC ÷ When the movie clip recorded by the camera doesn'tplay back on the PC, the causes are mostly due to thecedec installed on the PC. • When codec for play back the movie clip isn't installed Installthe codec as listed below. [ Installingcodec for Windows ] 1)tnsert the CD provided with the camera. 2) Run the windows explorer and select [CD-ROM dfive:_XviD]folder and click the XviD-1.0.3-20122004.exefile. ÷ The XviD codec is distributed according to the GNU General Public Usance and everyone can copy,distributeand change this codec. This Usance applies to any programor other work which contains a notice placed bythe copyrightbotder saying it may be distributed under theterms of this General Public Licence. For more information, see the Licence documents (http://Vevw.gnu.org/copyleft/gpLhtml). [ Installingcodec for Mac OS ] 1)Visitthe following sitefor downloadingthe codec. (http://www.divx.com/divx/mac) 2) Click the [Free Download]button locatedat the upper right side of the page and a window for downloading the DivX codec will display. 3) Select Mac OS you use and click the [Download] button.Save it on a folder you want to. 4) Run the downloaded file and the codec for playing back the movie clip will be installed. ÷ Ifa movie clip can't play back on the MacOS, use a mediaplayer that supports XviD codec (Mplayer). (73}

Installthe DirectX9.0 or later 1)Insert the CD provided with the camera 2) Run the windows explorer end select the [CD-ROM drive:\ USB Driver\DirectX9.0] folder and clickthe DXESETUP.exe file. The DirectX will be installed. Visitthefollowing site for downloading the DirectX.http://www.micresoft.com/directx • If a PC (Windows98) stops responding while the camera and PC are connected repeatedly tf a PC (Windows98) isturned on for e long time and the camera is connected repeatedly, the PC maynot recognise the camera. In thiscase, re- start the PC. • If a PCconnected withthe camera stops respondingwhile Windows isstarting. tn this case disconnectthe PC and the camera and Windows willstart. tf the problem happens continuously, set the Legacy USB Support to disable and re-start the PC. The Legacy USB Support is in the BIOS setup menu. (The BIOS setup menu differs from the PC manufacturers and some BIOS menus don't have LegacyUSB Support) Ifyou can_ change the menu by yourself, contactto the PC manufactureror BIOS manufacturer. Correct Diepoeal of This Product (Waste Electrical & Electronic Equipment) (Applicablein the European Union and other European countrieswith separatecollection systems) This marking shown on the product or its iiteratare, indicatesthat it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human healthfrom uncontrolled waste disposal,please separate this from other types of wastes end recycle it responsiblyto promote the sustainablereuse of materialresources. Household users should contacteither the retailer wherethey purchased this product, or their localgovernment office, for detailsof where and how they can take this itemfor environmentally saferecycling. Businessusers should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. • If the movie clip can't be deleted, removable disk can't be extractedor an error message displays duringthe file transfer. tf you installonly the Digimex Master, the problems mentioned above occasionally happen. - Close the Digimax Master programby clicking the Digimax Master icon on the Taskbar. - Install ell the applicationprograms included in thesoftware CD. (You must installthe Movie clip codec) _tOHS com#l e_tt Samsung Techwin cares for the environment at all product manufacturing stages to preservethe environment, and is taking a numberof stepsto provide customers with more environment-friendlyproducts. The Eco mark represents Samsung Techwin's wiltto create environment-friendly products, and indicatesthat the product satisfiesthe EU Rolls Directive. {74}

Trade Name : SAMSUNG TECHWIN Model No. : Samsung L700 Responsible Party : Samsang Opto-ElectroniceAmerica, INC. Address : 40 Seaview Dr. Secaucus,NJ07094 Telephone No. : 201-902-0347 Thisdevice complies with Part 15 of the FOC Rules. Operation is subject to thefollowing two conditions: (1)This device may notcause harmful interference,and (2)this device must accept any interference received, including interferencethat may cause undesiredoperation. (75_

FAX :(82}81-740-8398 vtc_'wsamsungcamelaaOM SAMSUNGFF/4tqOESAS BP51TOUR_,4/\_NEMONTPARNASSE83, AV DU MAINE75755 PARISCEDEX15 FRANCE HO1LINEPBOTONUMER/QUE: 00&9O22% 3727(NumeroV(et-Appe_@atut) TEL :88} 1-4279-2%0 FAX:(%) 1-4320-4510 w_e/sarr'sungp/_otoI_" SAMSUNGOF[O-ELECTRON_CSUKLWITED SAMSUNGHOUSE1000B/LLSWOODDRIVE HILLSWOODBUSINESSPARK CHER-%EYK516 OPSUK TEL :00800122_727 (freeforcaib fromUKonly) JK Se_¢ceRotlne :01932455820 www_rasu%caff'era couk SAMSUNGO_rTO-ELEOTRONICS AMERICAINC HEADQUAMER8 40SEAMIEWDR/VE_SECAUOUS, NJ07%4 USA TEL :(1)201-902-03-4,7 F}_X:(1}201-902-9842 WESTERNREGIO[_ALOFFICE 18600BROADWICKST RANOHODOMINGUE?,CA90220,USA TEL :(1)310-909-5284/5285 FAX :(1}310-537-1566 vt@_/samsunges_erausa corn SAMSUNGOPTOELECTr-IONICSGMBH A_,4KRONBERGERHANG6 D-68824SCHWALBACR£S GERMANY TEL :@ (O)619668530,3 FAX:49{O)61966653 68 w_7 saff'sungcamerade TANJINSAMSUNGOPTO ELE(TTRONIO8CO I_TD '/o9 zhae@sn9Str(_XMb'o-ElecLreeic IndustraParkJingar9 ReadTis=_Jiin China RUSSIAINFORMA:]ONCENTER SAMSUNGELE(;1RONIOS 117545ST DOROZHNAYABUILDING8 KORPUS6 ENTF/ANCE2_MOSOOW,RUSSIA TEL :(7}[email protected]% CALLFREE: (8}800_O 0 409(fromR_Jssaonly) _wvw_msu%ca_'era ru Internetaddress - http://www samsungcameracorn -_ The OE Markis Directive conformity a markof theEuropeanCommunity(EO) _-............................................ 6806-3544