Thrustmaster RUN'N'DRIVE 3-IN-1 RUMBLE FORCE Operation & User’s Manual
Text of the manual
1. 2 progressive analog mini-sticks
+ 2 digital action buttons
2. Progressive optical wheel
3. Progressive left trigger
4. Progressive right trigger
5. D-Pad
6. Action buttons
7. MAPPING button (for programming)
8. MODE button with LED
(to select the system or number of axes)
9. PRESET button with LED
TABLE OF SUPPORTED MODES
System
MODE
Color of MODE
button (8)
PLAYSTATION® 1
“PS1”
OFF
PLAYSTATION® 2
“PS2”
GREEN
PLAYSTATION® 3
“PS3”
OFF
“4 AXES”
OFF
“5 AXES”
RED
PC
“7 AXES”
GREEN
PLAYSTATION® 2
INSTALLATION ON PLAYSTATION® 2
1. Connect the PS2 game port connector (11) to a game port on your console.
2. Turn on your conso
INSTALLATION ON PLAYSTATION® 3
1. Connect the USB connector (12) to a USB port on your console.
2. Turn on your console.
3. Switch your gamepad to “PS3” mode = the MODE button should be Off.
(to do so, if necessary, press the button until it switches off).
4. Launch the game.
You are now ready to play!
“PLAYSTATION® 3”
INSTALLATION ON PC
The CD-ROM included with this product allows you to install the Force Feedback drivers.
1. Insert the installation CD-ROM into your CD-ROM drive. Follow the on-screen instructions to install
the Force Feedback drivers. Once installation is complete, click Finish and restart your computer.
2. Once your computer has restarted, conn
3 “AXES” MODES AVAILABLE ON PC
“AUTOMATIC PRESET” CONFIGURATION - PC
“4 AXES” mode
MODE button is OFF
Here:
• “Optical wheel” associated with
“Left/Right” direction on left mini-stick
• “Right” trigger associated with
“Up” direction on right mini-stick
• “Left” trigger associated with
“Down” direction on right
ADJUSTING THE OPTICAL WHEEL’S SENSITIVITY
The optical wheel (2) has 2 sensitivity modes:
- Normal sensitivity (default mode)
- High sensitivity (must be adjusted)
• Adjustment for “High sensitivity” mode:
Steps
Action
Color of MODE
button
1
Raise and hold the “UP” direction on the optical wheel
2
Press and release the MAPP
PROGRAMMING THE OPTICAL WHEEL AND TRIGGERS
The 2 directions of the optical wheel and the 2 progressive triggers can be programmed using the
MAPPING button (7).
• Examples of possible applications:
Programming a button, direction of a mini-stick or of the D-Pad:
- onto the “up” or “down” direction of the optical wheel
- onto the “right�
• Your gamepad features an internal chip which serves to retain all of your “MANUAL PRESET”
programming in memory (even when the gamepad is switched off or disconnected for a long period of
time).
• You can save 1 different “MANUAL PRESET” for each system used (PS1, PS2, PS3, PC 4 Axes, PC 5
Axes or PC 7 Axes). The exception i