Samsung 6+ series Operation & User’s Manual

Web Site AUSTRIA 0800-SAMSUNG (726-7864) www.samsung.com/at BELGIUM 0032 (0)2 201 24 18 www.samsung.com/be CZECH REPUBLIC 844 000 844 www.samsung.com/cz Distributor pro Českou republiku: Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4 DENMARK 70 70 19 70 www.samsung.com/dk EIRE 0818 717 100 www.samsung.com/ie FINLAND 030-6227 515 www.samsung.com/fi FRANCE 3260 SAMSUNG (€ 0,15/Min) 08 25 08 65 65 (€ ...

Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. •  Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. •   Wa ...

List of Parts......................................................... 2 Viewing the Control Panel................................... 3 Viewing the Connection Panel............................ 4 Viewing the Remote Control............................... 6 Installing Batteries in the Remote Control........... 7 Switching On and Off.......................................... 7 Placing Your Television in Standby Mode... ...

List of Parts Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. M4XL16 Remote Control & Batteries (AAA x 2) Power Cord Cover-Bottom Stand Screw X 4 Wall Mount kit Decoration Cover Stand Cleaning Cloth ♦ Owner’s Instructions ♦ Warranty card ♦ Safety Guide ♦ Registration Cards Warranty card / Safety Guide / Registration Cards (Not available in all locations) The stand, st ...

Viewing the Control Panel 1 SOURCE Toggles between all the available input sources (TV, Ext., AV, Component, PC, HDMI, DTV). In the on-screen menu, use this button as you use the ENTER button on the remote control. 2 MENU Press to see an on-screen menu of your TV’s features. 3 Press to decrease or increase the volume. In the on-screen menu, use the buttons as you use the ◄ and ► buttons on the remote control. 4 Press to change channels ...

Viewing the Connection Panel Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable. ➣ ➣ The product colour and shape may vary depending on the model. ➣ [TV Rear Panel] 2 4 3 5 7 8 9 6 1 0 ! Power Input [TV Side Panel] 1 EXT Connector Input Output Video Audio (L/R) RGB Video + Audio (L/R) EXT O O O Only ...

5 ANT IN To view television channels correctly, a signal must be received by the set from one of the following sources: An outdoor aerial / A cable television network / A satellite network 6 COMMON INTERFACE Slot When CI Card isn’t inserted in some channels, "Scrambled Signal" is displayed on the screen. The pairing information containing a telephone number, CI Card ID, Host ID and other information will be displayed in about 2~3 minutes. I ...

TOOLS 1 Television Standby button 2 Selects the TV and DTV mode directly 3 Number buttons for direct channel access 4 One/Two-digit channel selection 5 +: Volume increase : Volume decrease 6 Temporary sound switch-off 7 Use to quickly select frequently used functions. 8 Use to see information on the current broadcast 9 Colour buttons : Use these buttons in the Channel list, etc. ! Electronic Program Guide (EPG) display @ Available source sele ...

1. Lift the cover at the back of the remote control upward as shown in the figure. 2. Install two AAA size batteries. Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment. 3. Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. ➣ ➣ If the remote control doesn’t work, check the following: 1. Is the TV power on ...

You can use the TOOLS button to select your frequently used functions quickly and easily. The “Tools” menu change depending on which external input mode you are viewing. 1. Press the TOOLS button. The “Tools” menu will appear. 2. Press the ▲ or ▼ button to select a menu. 3. Press the ▲/▼/◄/►/ENTER buttons to display, change, or use the selected items. For a more detailed description of each function, refer to the corresp ...

When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available. Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with the fu ...

9. Press the ENTER button to confirm your setting. The message “Enjoy your viewing” is displayed. When you have finished, press the ENTER button. Even if the ENTER button is not pressed, the message will automatically disappear after several seconds.  Language: Select your language.  Country: Select your country.  Auto Store: Automatically scans for and stores channels available in the local area.  Clock Set: Sets the ...

Storing Channels Manually Not available in DTV or external input mode. You can store television channels, including those received via cable networks. When storing channels manually, you can choose: ♦ Whether or not to store each of the channels found. ♦ The programme number of each stored channel which you wish to identify. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the E ...

Not available in DTV or external input mode. Using the Channel Manager, you can conveniently lock or add channels. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Channel Manager", then press the ENTER button. ♦  Adding channels Using the Channel List, you can add channels. 3. Select "Channel List" by pressing the ENTE ...

This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store. Not available in DTV or external input mode. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Sort", then press the ENTER button. 3. Select the channel number that you wish to change ...

Use fine tuning to manually adjust a particular channel for optimal reception. Not available in DTV or external input mode. 1. Use the number buttons to directly select the channel that you want to fine tune. 2. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 3. Press the ▲ or ▼ button to select "Fine Tune", then press the ENTER button. 4. Press the ◄ or ► ...

You can select the type of picture which best corresponds to your viewing requirements. 1. Press the MENU button to display the menu. Press the ENTER button, to select "Picture". 2. Press the ENTER button again, to select "Mode". 3. Press the ▲ or ▼ button to select the desired picture effect. Press the ENTER button. 4. Press the EXIT button to exit. ♦ Dynamic: Selects the picture for high-definition in a bright room. ♦ Standar ...

Your set has several settings which allow you to control picture quality. 1. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3. (On page 15) 2. Press the ▲ or ▼ button to select a particular item. Press the ENTER button. 3. Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER button. 4. Press the EXIT button to exit. ♦ Backli ...

1. Press the MENU button to display the menu. Press the ENTER button, to select "Picture". 2. Press the ▲ or ▼ button to select “Picture Options”, then press the ENTER button. 3. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. 4. When you are satisfied with your setting, press the ENTER button. 5. Press the EXIT button to exit. In PC mode, you can only make changes to the “Colou ...

♦ Screen Mode: Wide/16:9/Wide Zoom/Zoom/4:3 When setting the picture size to "Auto Wide" in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it. ♦ Wide: Sets the picture to 16:10 wide mode. ♦ 16:9: Sets the picture to 16:9 wide mode. ♦ Wide Zoom: Magni ...