Toa DA-550F CE301 Operating Instructions Manual

Text of the manual

MULTICHANNEL POWER AMPLIFIERS

DA-500FH CE301 DA-500FH CE-GB DA-500FH CE-AU Thank you for purchasing TOA's Multichannel Power Amplifier. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment. Note: The figure shows the DA-550F. An all-pole mains switch with a contact separation of at

TABLE OF CONTENTS

1. SAFETY PRECAUTIONS ............................................................................... 3 2. GENERAL DESCRIPTION ............................................................................. 4 3. FEATURES .......................................................................................................... 4 4. HANDLING

When Installing the Unit

• Do not expose the unit to rain or an environment where it may be splashed by water or other liquids, as doing so may result in fire or electric shock. • Use the unit only with the voltage specified on the unit. Using a voltage higher than that which is specified may result in fire or electric shock. • Do not cut, kink, othe

• Avoid installing the unit in humid or dusty locations,

in locations exposed to the direct sunlight, near the heaters, or in locations generating sooty smoke or steam as doing otherwise may result in fire or electric shock. • To avoid electric shocks, be sure to first turn off this unit's power switch when connecting speakers. • The unit is designed e

4. HANDLING PRECAUTIONS

• Keep the input cable away from the output cable. If installed close to each other, oscillation could occur. • To avoid unit failures, never connect outputs of 2 or more channels in parallel. • Only connect speakers with an impedance equal to or greater than those specified. Connecting speakers with a smaller impedance than s

6. NOMENCLATURE AND FUNCTIONS

[Front] 1. Power switch [ON/OFF] Turning this switch on causes the amplifier to function, and turning it off causes the amplifier to cease function. Note: The unit is not completely disconnected from the power supply even if this Power switch is turned off. 2. Power indicator [POWER] Lights blue when the Power switch (1) is tu

6. AC inlet

Connect the supplied power cord to this inlet. The socket-outlet shall be installed near the equipment and the plug (disconnecting device) shall be easily accessible. 7. Control/Monitor terminals [CONTROL/MONITOR] Connecting external equipment to these terminals makes the control and

Step 1. Turn off this unit's Power switch.

Step 2. Set the BRIDGE ON/OFF switches (DA-550F only) and CH 1 mode ON/OFF switch. Step 3. Connect the sound source equipment to the Input terminals. Note: Refer to p. 11 for the removable terminal plug connection. Step 4. Connect speakers to the Speaker output terminals. 4-1. Unscrew the output terminal cover. 4-

CH 1 mode

ON ON ON Setting CH1 CH1 CH2 CH3 CH4 BRIDGE 1 BRIDGE 2 Speaker output terminals 8 Ω 8 Ω - + - + [1 input - 2 outputs] CH1 - + CH2 - + Speaker output terminals Switch BRIDGE 1 BRIDGE 2 CH 1 mode OFF ON OFF Setting 4 – 8 Ω 4 – 8 Ω 8 Ω CH1 CH2 CH3 CH1 CH2 CH3 CH4 BRIDGE 2 - + [3 inputs - 3 outputs (1)] CH3 - + CH4 -

Speaker output terminals

Switch BRIDGE 1 BRIDGE 2 CH 1 mode ON OFF ON Setting 8 Ω 4 – 8 Ω 4 – 8 Ω CH1 CH3 CH4 CH1 CH2 BRIDGE 1 - + [1 input - 3 outputs (2)] CH4 - + CH3 - + CH2 - + CH1 - + Speaker output terminals Switch CH 1 mode OFF Setting 20 Ω 20 Ω 20 Ω 20 Ω CH1 CH1 CH2 CH2 CH3 CH3 CH4 CH4 [4 inputs - 4 outputs] (factory-pr

Other Amplifier Manuals