Toa N-DR2000 Instruction Manual

N-DR2000 INSTRUCTION MANUAL Thank you for purchasing TOA's Network Video Recorder. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment. ...

1. SAFETY PRECAUTIONS ............................................................................... 3 2. LIST OF INCLUDED COMPONENTS AND PARTS ............................... 5 3. GENERAL DESCRIPTION ............................................................................. 5 4. FEATURES .............................................. ...

• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation. • Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included. • We also recommend you keep this instruction m ...

result in moderate or minor personal injury, and/or property damage. CAUTION When Installing the Unit • Never plug in nor remove the power supply plug with wet hands, as doing so may cause electric shock. • When unplugging the power supply cord, be sure to grasp the power supply pl ...

Check to be sure that the following components and parts are contained in the package: Power supply cord (2 m) .................................................................................. 1 Network Video Recorder Instruction manual .................................................. 1 CD-ROM (Update disk) ..... ...

• The supplied power supply cord is designed for exclusive use with the Recorder. Never use it with other equipment. • It is recommended that the Recorder be always used in locations where the ambient temperature ranges from 0°C to +40°C and humidity levels of less than 80% to ensure that no condensation is formed. • When mo ...

Press this switch to turn on the power. To turn off the power, press this switch again. After powering up : The system starts after about 1 minute. After powering down: The system shuts down after about 30 seconds (2) Message Indicator (Red) Flashes or illuminates to indicate the action of internal protection circuits. Illuminated: Tur ...

N-CC2564 Network Color Camera N-CC2360 Network Video Receiver N-VR2010 Monitor Network Video Transmitter Network Video Transmitter N-VT2010 HDD DEO NETWORK V I ERROR N- RECORDER POWER DR2000 Network Video Recorder N-DR2000 PoE compatible switching HUB Analog CCTV system To AC Main To AC Main To 24V ...

The device is equipped with the following functions. • Recording (Normal Recording, Pre-Alarm Recording, Alarm Recording, Scheduled Recording) • Search and playback using the N-SD2000 Software Decoder • Setting adjustment using a Web browser • Email notification in the event of malfunction • Time adjustment an ...

Normal recording Alarm recording Normal recording Alarm occurs. Alarm ends. (Example) If an alarm occurs for a camera in Normal Recording mode... Since Alarm recording has a higher priority than Normal recording, the device sw ...