Topcom 500 Operation & User’s Manual

8 4 USER INTERFACE CONCEPT 9 4.1 Language Setting 9 4.2 Operation 9 5 ESTABLISHING A PHONE CALL 10 5.1 OUTGOING CALLS 10 5.2 INCOMING CALL 11 5.3 CALL LOG 11 5.4 GROUP LISTENING 11 5 ...

20 9.1.2 Enter/Change Call Fowarding destination 20 9.2 PHONE BARRING 20 9.3 HOTLINE CALLS 21 9.4 CALL LOG 22 9.5 DISPLAYING THE SELECTED FEATURES 22 9.6 DIRECT FEATURE ACCESS 23 9.6.1 Disable function Code Display 23 10 RINGER CONFIGURATIONS 24 10.1 QUIET FUNCTION (DO-NOT-DISTURB) 24 10.1.1 Function ON 24 1 ...

35 13.7 TELEPHONE RESET 36 13.8 CALLER ID DISPLAY CONFIGURATION (NUMBER, NAME, OFF) 36 13.9 USER TO USER SIGNALLING (UUS) 37 13.9.1 Programming UUS Messages 37 13.10 LEAST COST ROUTING (LCR FUNCTION) 37 14 DATA INTERFACE 39 14.1 CONFIGURATION OVERVIEW 39 14.2 ESTABLISHING INTERNET CONNECTION (WIN95®; WIN98®) 39 14.2 ...

programming sequence. 3 Selection/confirmation of the menu item offered in the display. 4 To go to the previous available menu item. Correction of an entry (last character). 5 To go ...

00:39 ISDN
 1 2 3 4 2 DISPLAY 1st Line • In idle state, date and time will be displayed. • During a connection, the number of the called party will be displayed. • In case of a function selection, the main menu will be displayed. 2nd Line • When programming, the selected function will be displayed. The function ...

• Do not place the phone in an area where it may come into contact with water and chemicals. • Plastic support pads of the phone: The equipment has been manufactured for usage in normal environments. Chemical influences from the area, in which you place the phone (chemicals used for t ...

4.1 Selecting the language It is possible to set the display texts in different languages. • Select the system parameter menu … • Select the language menu. The menu can be directly accessed using the shurtcut 261 • Confirm to enter • Scrolling : You can now select the different languages • Press OK key to confirm 4.2 Oper ...

• Each menu item (function) is displayed with a 3 digit function code in front of the function name (display of function codes can be switched off). The menu/function can be directly accessed by pressing the Function key “” (left side o ...