Topcom Wireless USB Stick Quick Installation Manual

QUICK INSTALLATION GUIDE BEKNOPTE INSTALLATIEHANDLEIDING GUIDE D’INSTALLATION RAPIDE INSTALLATIONSKURZANLEITUNG GUÍA DE INSTALACIÓN RÁPIDA GUIA DE INSTALAÇÃO RÁPIDA KORTFATTAD INSTALLATIONSHANDLEDNING HURTIG INSTALLATIONSGUIDE HURTIGINSTALLASJON PIKA-ASENNUSOPAS ...

The Declaration of conformity can be found on : http://www.topcom.net/support/cedeclarations.php For use in: Belgium, Holland, Germany, Sweden, Denmark, Norway, Finland, Spain, Italy, Portugal, Greece, Turkey ...

3 Before You Start 4 1. INSTALL THE SKYR@CER WIRELESS USB STICK DRIVER AND UTILITY 5 2. CONFIGURE THE WIRELESS UTILITY 8 3. CONFIGURE THE TCP/IP SETTINGS ON THE WIRELESS USB STICK 12 4. WARRANTY 14 SECURITY WARNING To avoid that uninvited users will access your wireless network it is strongly recommended to activate WEP (or ...

BEFORE YOU START Before installation, please check your system and ensure it meets the minimum requirements: - Processor: min. Pentium II 300 Mhz or higher - Operating System: Microsoft Windows 98SE / ME / 2000 / XP - System memory: 32MB at least - Hard Drive Free Space: 5Mb - CD rom drive - Free USB port Important : To p ...

5 1. INSTALL THE SKYR@CER WIRELESS USB STICK DRIVER AND UTILITY 1. Insert the CD rom into the CD rom drive 2. The CD will start automatically. (If the autorun does not start, please execute the autorun.exe on the CD) 3. Select Install Software to install the Wireless LAN Utility together with the drivers. ...

4. In the Wireless LAN Setup screen, click Next to start driver installation. 5. Click “Next” to install at the designated folder. Or, click “Browse” to select different folder. ...

7 6. Click Finish to terminate the installation. If necessary, the computer will ask to reboot. (Windows 98 se and Me) 7. Insert the Skyracer Wireless USB Stick into a free USB port of your PC. Windows will detect new hardware and start the installation of the driver. 8. Click “Finish” to complete the Setup. ...

2. CONFIGURE THE WIRELESS UTILITY After installation of the driver and utility, you will have new icon in the Windows system tray. For Windows 98Se , Me and 2000: double click the skyracer wireless USB icon : to open the configuration tool. • Select ‘Refresh’ to view all available wireless Access Points • Double c ...

9 • Select ‘More settings’ to set the SSID , network type and WEP encryption. For Windows XP : this operating system has its own wireless LAN tool build in. To open the WLAN configuration, double click the wireless network icon in the system tray. ...

This will open the configuration tool: Select the wireless available WLAN network and click ‘Connect’. Or select ‘Advanced…’ for more settings. ...