Fender P10W Operation & User’s Manual

(1) Molded Carry Handle (2) 5” Full-Range Loudspeaker (3) 1/4” (6.3mm) Input Jack. This is a mic level input jack. Use this jack to plug in a wired microphone if necessary (second mic input). (4) Power Switch/ Wireless Mic Volume Control. A click-off position is located at the fully counter-clockwise position. Rotating the control cl ...

nal. As the agent announces events taking place at that gate, everyone in the terminal can also hear the information. Using the secondary 1/4” microphone input - You must use a microphone that has a cable with a 1/4” connector. Plug the 1/4” end of the mic cable into the 1/4” Inp ...

Getting good results with a microphone is largely due to proper micro- phone technique. Hold the microphone directly in front of your mouth. Picture yourself eating a lollipop. The lollipop stick is the “body” of the microphone. This is the proper angle you should be holding the microphone in relation to your mouth. ...

dealer, Service Center or from Fender Musical Instruments directly. Wireless Microphone 169.505MHz 069-1102-001 Wireless Microphone 171.905MHz 069-1102-002 Shoulder Strap 005-7527-000 Universal Power Adapter 005-7530-000 AC Power Cord 120v 005-7531-000 230v Euro 005-7532-0 ...

Fender Musical Instruments Corporation Corona, CA USA Crafted in Taiwan www.fender.com www.fenderaudio.com Pt # 005-7537-000 ...