Festool C12 Instruction Manual
Text of the manual
Manual de instrucciones
Página 14 - 19
IMPORTANTE: Lea y comprende
todas las instrucciones antes de usar.
Guide d’utilisation
Page 8 - 13
IMPORTANT: Lire et comprendre
toutes les instructions avant de
démarrer les travaux.
Instruction manual
Page 2 - 7
IMPORTANT: Read and understand
all instructions before using.
Cordless Drill /
Screwdrive
GENERAL SAFETY RULES
Read and understand all instruc-
tions. Failure to follow all instructions listed below
may result in electric shock, fi re and/or serious
personal injury.
SAVE THESE INSTRUCTIONS
1) Work area safety
a) Keep work area clean and well lit. Cluttered
and dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres
Idle-running speed: 1. speed / 2. speed
0 – 450 rpm / 0 – 1500 rpm
Max torque: soft case / hard case
18 Nm / 30 Nm
Adjustable torque: 1. speed / 2. speed
2 – 7 Nm / 0.5 – 2.5 Nm
Chuck capacity
1.5 – 13 mm
Max. drill diameter for metal / wood
14 mm / 25 mm
Tool fi tting in chuck
1/
no load speed
Class II Construction
rpm
revolutions per minute
Intended use
Cordless drills are suitable for drilling metal, wood,
plastics and similar materials, as well as tighten-
ing and screwing in screws (into wood, up to a
diameter of 6 mm).
The LC 45 battery charger is designed for
The chuck is used to clamp drills and bits.
Fitting:
- Place the chuck on the drill spindle (2.5) and
twist until the hexagon key (2.4) of the chuck
latches into the hexagon socket of the drill
spindle.
- Pull the unlocking ring (2.3) forwards, press the
chuck onto the drill spindle up to the stop and
release the unlocking ring.
Removal:
- Pull
